Adaptive Technologies Group

Speaker mounts and rigging hardware.

Coming Soon

Back to Home Page

About Adaptive Technologies Group

Adaptive Technologies Group is a U.S.-based manufacturer specializing in speaker rigging and mounting hardware for commercial audio installations. Their product line focuses on solving real-world mounting challenges in venues where standard wall brackets won't cut it: beam clamps for steel structures, adjustable U-brackets for varying speaker widths, telescoping pipe adapters for precise height adjustments, and their Steerables line for flyable arrays. ATG hardware is built for installers who need load-rated, code-compliant solutions that work the first time. You'll find their gear in corporate AV systems, houses of worship, performing arts centers, and anywhere a speaker needs to hang safely and stay put.

Beam Clamps and Structural Mounting

ATG's beam clamps attach to I-beams and channel iron without drilling or welding. The BC3-8 series fits 3 to 8-inch flanges, the BC7-12 handles 7 to 12-inch beams, and the BC12-17 covers the largest structural steel. Each series comes in three configurations: single hang point for simple drops, dual hang points for stereo pairs or arrays, and open hang points for custom rigging. The swivel arm beam clamps (SBC series) add 20 or 30-inch articulating arms, letting you position speakers away from the beam centerline. Wood beam clamps (BC-W series) use lag screws instead of clamps for timber construction. All models include swivel eyes or shackle points for cable or chain attachment.

Adjustable U-Brackets and Wall Mounts

The AJ series U-brackets solve the problem of mounting speakers with non-standard widths. The AJ-1524-BT adjusts from 15 to 24 inches, the AJ-2336-BT covers 23 to 36 inches. Both use thumbscrews for tool-free width changes and include tilt adjustment. Pair them with the UB-3RDX-60 third-axis adapter for roll control. ATG's MM series wall mounts range from compact pan-and-tilt brackets (MM-016-BT, MM-024-BT) to heavy-duty models like the MM-120 for large-format speakers. The MM-3RDX-18 adds full three-axis positioning: pan, tilt, and roll. Wall arms like the SAS-200-24 extend speakers 24 inches from the wall with yoke compatibility.

Steerables Line Array Rigging

The Steerables line handles flyable speakers and line arrays. The SAS-100-CM ceiling mount and SAS-100-WM wall mount work with manufacturers' flying hardware. The SAS-500-WM is purpose-built for line arrays mounted to walls. Adjustable tilt cable kits (TCK-014, TCK-018) let you dial in vertical aiming angles after installation. The SAS-1WA-20 cross arm supports single-column arrays, while the SAS-2WA-48 cluster system rigs dual arrays with independent aiming. All Steerables hardware includes load ratings and safety factors for permanent installation.

Pipe Adapters and Outdoor Mounting

ATG's pipe hardware includes threaded adapters (MP-500NPT-CP ceiling plates, MP-500NPS-TA strut channel adapters) and telescoping extensions (PIPE-500-1015) for half-inch NPT pipe. The PM series pole mounts attach speakers to outdoor light poles or structural columns. The PM-24-6UP-G fits 6 to 24-inch diameter poles, the PM-24-6DOWN-G handles 2 to 6-inch poles, both galvanized for weather resistance. Stainless steel pole bands (PM-BAND-20S) and safety anchors (PM-SAFETY-6DOWN) complete the outdoor rigging kit. Heavy-duty truss clamps (MC-030-B) and stainless safety cables (SC-188-30-SS) round out the accessory lineup.

Shop Adaptive Technologies Group at Blackout Audio

ATG's beam clamps and rigging hardware solve mounting problems that generic brackets can't touch. If you're installing speakers in a venue with exposed steel, timber beams, or outdoor poles, these are the tools that let you do it right. Free shipping on orders over $199 across Canada. Contact the Blackout Audio team for load ratings, compatibility questions, or help spec'ing the right hardware for your install.