Warm Audio WA-RA All-Analog Studio Re-Amper with Independent Preamp

The Warm Audio Reamper is a creative routing hub that lets guitar amps, pedals, synths, and studio gear work together, with silent tube amp recording built in. Re-amp dry DAW signals with any of your favorite tube amplifiers. Add any studio gear to your guitar chain, or add any guitar effects to your typical studio chain easily. Use the built-in power soak to record tube amps up to 50W (8Ω impedance) without engaging the speaker for silent tracking. Not limited to just guitar, add any synth modules to line-level sources as well and craft the ultimate experimental tones with any type of effects processors.

Add Life To Dry Guitar Tracks With Real Tube Amps: Take dry guitar tracks straight from your DAW and feed them directly into your favorite tube amps via the Reamper. Not having to play the part during the re-amping process means endless tweaking and sound-crafting possibilities.

Independently Track Dry & Tube-Amp Signals: Use the multitude of connections on Reamper to record with your favorite tube amps for confidence, feel, and response while also simultaneously capturing a “bail-out” dry signal for the session that can be re-amped or run through amp sims later in the mixing process. Reamper also works for integrating keyboard/synth gear and works for active and passive connections.

Track Loud Amp Tones Quietly At Home Or In The Studio (50W/8Ω): Get the most out of your 50W tube amps regardless of time of day, or how many neighbors will complain. Reamper has a built-in 50W/8Ω power soak, allowing you to record the pre and power amp without connecting a speaker. Easily monitor the signal through headphones connected to your audio interface.

Seamlessly Add Guitar Pedals To Line-Level Studio Rigs: Integrate unbalanced guitar effects into balanced, line-level signal chains. All of the cool delays, reverbs, tremolos, or ring modulators can be easily added to vocal chains, drum busses, and much more.

Use Line-Level Rack Mount Effects Units On Guitar Chains: Any line-level balanced studio rack gear can be added directly into your guitar recording chain during recording or re-amping. It can be a compressor, EQ, or digital reverbs and delays; Reamper makes translating guitar chains to studio chains simple.

Built To Professional Studio Standards: Reamper includes USA-Made CineMag transformers on the input and output stages and a custom heat sink to manage the power soak for silent recording. Like all Warm Audio gear, Reamper is loaded with premium electronic components throughout the signal path.

5-Year Warranty: Like all Warm Audio gear, every single WA-RA comes with a 5-year warranty and is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.

PRODUCT DESCRIPTION & EXTERNAL SPECS

• Dual-Channel Active Instrument Preamp & Re-Amp Device
• Independent Instrument Preamp And Re-Amp Signal Paths
• CineMag Transformer Isolation On Each Signal Path
• Connect Instrument, Line-Level, & Speaker-Level Signals
• Compatible With Passive And Active Instruments, Keyboards, And Pedals
• Speaker Input With Direct Through Or Built-In Power Soak For Silent Operation
• Stepless Re-Amp Output Level Control For Attenuation Or Gain
• Balanced Line-Level I/O On XLR And 1/4" Connections (No Phantom Power Required)

COMPONENTS & INTERNAL SPECS

• Custom CineMag USA Transformers On Each Signal Path (Inputs & Outputs)
• Switchable JFET Discrete Or JFET Op-Amp Instrument Input Stage
• Fully Active Circuitry With Ultra-Low-Noise Design
• High-Quality Components Throughout Signal Path
• Internal Universal AC Power Supply

PERFORMANCE SPECS

• Channels: 2
• Maximum Instrument Input Level: +18 dBu (6 VRMS)
• Instrument Input Impedance: Variable 120kΩ To 1MΩ
• Re-Amp Output Level: Stepless Attenuation To Gain
• Speaker Power Soak: 8 Ohms, 50 Watts Max
• Balanced Line Output: True Line Level On XLR And 1/4"
• Phase-Invert & Ground/Lift Per Channel
• Power: 90–240V AC, 50–60 Hz

POPULAR USES

• Run DAW tracks back through any tube amp or effects pedals
• Cleanly mix/match any guitar and studio sources with or without analog vibe using the JFET / Op-Amp switch
• Use the built-in power soak to record tube amps up to 50W (8Ω impedance) without engaging the speaker for silent tracking.
• Easily add delays, reverbs, tremolos, or ring modulators to vocal chains, drum busses, and much more.
• Run your guitar signal through studio-grade preamps, compressors, EQs & more to get the full impact of a pro studio signal chain on guitar recordings