{"product_id":"universal-audio-ua-ape2m","title":"Universal Audio Apollo e2m Dante Headphone Amp \u0026 Line Interface","description":"\u003cp\u003eThe Universal Audio Apollo e2m is a stereo headphone amplifier and line interface for Dante audio networks, powered over Ethernet. It puts local monitoring anywhere on the network, with parallel 1\/4\" and 1\/8\" headphone outputs for headphones or IEMs, stereo line outputs for powered monitors or wedges, and stereo line inputs that send keyboards, synths, amp emulators or playback devices onto the network.\u003c\/p\u003e\n\n\u003ch3\u003ePersonal Monitoring with Apollo x16D\u003c\/h3\u003e\n\u003cp\u003eWith an Apollo x16D, the Mirror to Cue option in UAD Console sends a headphone mix to the x16D's Dante outputs, and Dante Controller routes it to the Apollo e2m. It works the same way with any other Dante device, such as a digital console or audio interface. One knob sets the level of the line outputs and both headphone outputs together, and the line and headphone outputs have their own mute switches.\u003c\/p\u003e\n\n\u003ch3\u003ePlacement and Power\u003c\/h3\u003e\n\u003cp\u003eA 5\/8\" thread on the bottom fits any mic stand or clamp, so the unit can sit next to the performer. It draws power from a PoE (802.3af) network switch over a single Cat5e or Cat6 cable, and an LED bar shows PoE status and output level.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x 2 stereo headphone amp and line interface over Dante\u003c\/li\u003e\n  \u003cli\u003eParallel 1\/4\" and 1\/8\" stereo headphone outputs, up to 300 mW into 32 ohms\u003c\/li\u003e\n  \u003cli\u003eBalanced 1\/4\" stereo line outputs\u003c\/li\u003e\n  \u003cli\u003eBalanced 1\/4\" stereo line inputs into the Dante network\u003c\/li\u003e\n  \u003cli\u003eOne level knob for all outputs, separate mute switches for line and headphone outputs\u003c\/li\u003e\n  \u003cli\u003eLED bar for PoE status and output level\u003c\/li\u003e\n  \u003cli\u003ePower over Ethernet (802.3af) and built-in 5\/8\" mic stand mount\u003c\/li\u003e\n  \u003cli\u003eWorks with Apollo x16D and any Dante network, AES67 at 48 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eI\/O:\u003c\/strong\u003e 2 x 2\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLine inputs:\u003c\/strong\u003e 2 x 1\/4\" TRS balanced, +18 dBu maximum, 10 kohm impedance, 120 dB dynamic range, -115 dB THD+N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLine outputs:\u003c\/strong\u003e 2 x 1\/4\" TRS balanced, +14 dBu maximum, 100 ohm output impedance, 120 dB dynamic range, -109 dB THD+N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadphone outputs:\u003c\/strong\u003e 1 x 1\/4\" and 1 x 1\/8\" TRS, 119 dB dynamic range, -112 dB THD+N\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadphone power (1\/4\"):\u003c\/strong\u003e 300 mW at 32 ohms, 86 mW at 300 ohms, 47 mW at 600 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadphone power (1\/8\"):\u003c\/strong\u003e 200 mW at 32 ohms, 79 mW at 300 ohms, 45 mW at 600 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz, ±0.03 dB (inputs), ±0.05 dB (outputs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSample rates:\u003c\/strong\u003e 44.1 kHz to 96 kHz, 24-bit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLatency:\u003c\/strong\u003e Under 0.2 ms analog to network; network latency 1, 2 or 5 ms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e 1 x RJ45 (100 Mbps), Dante or AES67 (48 kHz only)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e PoE 802.3af, 5.2 W typical, 7.3 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 4.73 x 1.88 x 4.87\" (120 x 48 x 124 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.1 lbs (493 g)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 1.5 lbs (0.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eApollo e2m\u003c\/li\u003e\n  \u003cli\u003eProduct safety sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":67380105380089,"sku":"UA-APE2M","price":699.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/ua-apollo-e2m-three-quarter.jpg?v=1792173880","url":"https:\/\/blackoutaudio.com\/products\/universal-audio-ua-ape2m","provider":"Blackout Audio","version":"1.0","type":"link"}