{"product_id":"universal-audio-ua-ape1x","title":"Universal Audio Apollo e1x Dante Unison Preamp","description":"\u003cp\u003eThe Universal Audio Apollo e1x is a single-channel mic and line preamp for Dante audio networks, powered over Ethernet and controlled remotely from UAD Console. Paired with an Apollo x16D, it becomes a Unison preamp that takes on the sound and behavior of classic preamps from API, Avalon, Manley, Neve, SSL and others. On its own it works on any Dante network as a transparent remote preamp for stage racks, front-of-house measurement mics or a lectern.\u003c\/p\u003e\n\n\u003ch3\u003eUnison with Apollo x16D\u003c\/h3\u003e\n\u003cp\u003eRouted to an Apollo x16D, each Apollo e1x runs the full library of UAD-2 Unison preamp plug-ins, which change impedance and gain staging to match the original hardware. Assistive Auto-Gain sets input levels for you. One Apollo x16D supports up to 16 Apollo e1x units, depending on available DSP, and four Apollo x16Ds support up to 64.\u003c\/p\u003e\n\n\u003ch3\u003eMounting and Power\u003c\/h3\u003e\n\u003cp\u003eA 5\/8\" thread on the bottom fits any mic stand or clamp, and the unit also sits on a table on rubber feet. The included coupling bracket joins units side by side, up to eight in about the space of one rack unit. Power comes from a PoE (802.3af) network switch or a PoE injector over Cat5e or Cat6 cable.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eOne XLR and 1\/4\" combo input that switches between mic and line automatically\u003c\/li\u003e\n  \u003cli\u003eGain (10 to 65 dB), 48 V phantom power, -20 dB pad, polarity and low cut controlled from UAD Console\u003c\/li\u003e\n  \u003cli\u003eUnison preamp modeling and Assistive Auto-Gain with Apollo x16D\u003c\/li\u003e\n  \u003cli\u003eWorks with any Dante network, routed in Dante Controller or UAD Console\u003c\/li\u003e\n  \u003cli\u003eAES67 support at 48 kHz and Dante Device Lock\u003c\/li\u003e\n  \u003cli\u003ePower over Ethernet (802.3af)\u003c\/li\u003e\n  \u003cli\u003eThreaded 5\/8\" mic stand mount and coupling bracket for linking units\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x mic\/line, XLR and 1\/4\" TRS combo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain range:\u003c\/strong\u003e +10 dB to +65 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMic input:\u003c\/strong\u003e 120 dB dynamic range (A-weighted), -115 dB THD+N, +25 dBu maximum (pad on), 5.4 kohm default impedance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLine input:\u003c\/strong\u003e 119 dB dynamic range (A-weighted), -112 dB THD+N, +24 dBu maximum, 10 kohm impedance\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz, ±0.04 dB (mic), ±0.08 dB (line)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e 20 dB (variable with Unison plug-ins)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSample rates:\u003c\/strong\u003e 44.1 kHz to 96 kHz, 24-bit\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLatency:\u003c\/strong\u003e Under 0.2 ms analog to network; network latency 1, 2 or 5 ms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNetwork:\u003c\/strong\u003e 1 x RJ45 (100 Mbps), Dante or AES67 (48 kHz only)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e PoE 802.3af, 3 W typical, 4 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRequirements:\u003c\/strong\u003e PoE network switch or PoE injector, Dante Controller; Apollo x16D for Unison\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 1.46 x 1.62 x 6.25\" (37 x 41.1 x 158.8 mm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 lbs (208 g)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 0.75 lbs (0.3 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eApollo e1x\u003c\/li\u003e\n  \u003cli\u003eCoupling bracket\u003c\/li\u003e\n  \u003cli\u003eProduct safety sheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Universal Audio","offers":[{"title":"Default Title","offer_id":67380104265977,"sku":"UA-APE1X","price":569.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/ua-apollo-e1x-three-quarter.jpg?v=1792173876","url":"https:\/\/blackoutaudio.com\/products\/universal-audio-ua-ape1x","provider":"Blackout Audio","version":"1.0","type":"link"}