{"product_id":"rts-bp-4000-a4m","title":"RTS BP-4000-A4M 1-Channel Portable Beltpack Headset with Autosensing (A4M)","description":"\u003cp\u003eWith the\u003cstrong\u003e Telex BP4000A4M Single-Channel Portable Beltpack Headset Station\u003c\/strong\u003e, you can stay in communication on an RTS, Audiocom, or Clear-Com intercom system. This wired beltpack station features auto-wiring scheme detection, which automatically recognizes the system you plug it into, and configures itself to be used with it.\u003c\/p\u003e\n\u003cp\u003eThe beltpack also features intelligent power management, so you can daisy-chain up to 40 beltpacks by using a single (optional) PS-20 power supply. A current pump circuit constantly keeps tabs on overall cable length, versus the actual current consumption, so each beltpack receives the voltage it needs.\u003c\/p\u003e\n\u003cp\u003eThe BP-4000 has additional features to help make it easy to integrate it into an intercom system, including guided setup and various communication controls. Connections are made by means of a male, 4-pin XLR connection.\u003c\/p\u003e\n\u003ch3\u003eEnhanced Talk Button Control\u003c\/h3\u003e\n\u003cp\u003eYou have the option to set your talk settings to either \"always on\", \"always off\", or \"switching\". A built-in blinking lamp gives you a visual indicator to incoming calls.\u003c\/p\u003e\n\u003ch3\u003eRemote Microphone Kill Switch\u003c\/h3\u003e\n\u003cp\u003eAny user on the intercom can instantly mute the mics on all attached BP4000A4M beltpacks by sending an inaudible \"kill signal\". This feature can be overridden if needed, but is useful to have in situations where an open mic somewhere in the partyline needs to be immediately silenced.\u003c\/p\u003e\n\u003ch3\u003eVoice Guided Setup\u003c\/h3\u003e\n\u003cp\u003eRather than configure internal jumpers and switches, short voice prompts help you navigate the menu options to configure the BP4000A4M. If needed, you also have the ability to reset the beltpack to factory default settings.\u003c\/p\u003e\n\u003ch3\u003eHeadset Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe BP4000A4M has a 4-pin male XLR port that is compatible with a (separately available) 4-pin female XLR headset. Both dynamic and electret headset microphones are supported.\u003c\/p\u003e\n\u003ch3\u003eRTS BP4000 Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e 1 x XLR (4-Pin, Male)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCall Signaling:\u003c\/strong\u003e Balanced Intercom Channel: 20 kHz, Send and Receive\u003cbr\u003eUnbalanced Intercom Channel: 20 kHz\/DC, Send and Receive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMic Off Frequency:\u003c\/strong\u003e Balanced Intercom Channel: 24 kHz, Send and Receive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level:\u003c\/strong\u003e Balanced Intercom Channel: 0.0 dBu, Nominal\u003cbr\u003eUnbalanced Intercom Channel: 0.0 dBu, Nominal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad Impedance:\u003c\/strong\u003e Balanced: 300 Ohms\u003cbr\u003eUnbalanced: 200 Ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise:\u003c\/strong\u003e Balanced: \u0026lt; -60 dBu\u003cbr\u003eUnbalanced: \u0026lt; -60 dBu\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Harmonic Distortion:\u003c\/strong\u003e Balanced: \u0026lt; 1.0%\u003cbr\u003eUnbalanced: \u0026lt; 1.0%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridging Impedance:\u003c\/strong\u003e Balanced: \u0026gt; 10 kOhms\u003cbr\u003eUnbalanced: \u0026gt; 10 kOhms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeadphone Amplifier:\u003c\/strong\u003e Maximum Output: \u0026gt; 140 mW into 150-Ohm Load\u003cbr\u003eFrequency Response: 200 Hz to 8 kHz (±2 dB)\u003cbr\u003eAudible Alert: 1 kHz\u003cbr\u003eTotal Harmonic Distortion: \u0026lt; 1.0%\u003cbr\u003eSidetone: \u0026gt; 20 dB Dynamic Range\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Operating Current:\u003c\/strong\u003e Balanced: 52 mA\u003cbr\u003eUnbalanced: 45 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 18 to 33 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 32 to 131° F \/ 0 to 55° C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Humidity:\u003c\/strong\u003e 5 to 95%, non-condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -4 to 158° F \/ -20 to 70° C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Humidity:\u003c\/strong\u003e 15 to 90%, Non-Condensing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.7 x 1.3 x 4.7\" \/ 95.2 x 34.2 x 119.2 mm\u003cbr\u003e3.7 x 1.6 x 4.8\" \/ 95.2 x 39.4 x 121.6 mm (with Belt Clip and Top Panel Button)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTS","offers":[{"title":"Default Title","offer_id":49011639550201,"sku":"BP-4000-A4M","price":856.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1548081332_1396156.jpg?v=1788588478","url":"https:\/\/blackoutaudio.com\/products\/rts-bp-4000-a4m","provider":"Blackout Audio","version":"1.0","type":"link"}