{"product_id":"royer-ro-r10mp-db22","title":"Royer R-10 Ribbon Microphone Matched Pair with dBooster2","description":"\u003cp\u003eThis Royer Labs bundle combines a matched pair of R-10 passive ribbon microphones with the dBooster2 (R-DB22), a two-channel in-line signal booster that also works as a DI. The R-10s handle more than 160 dB SPL for heavy guitars and close-miked brass, and the dBooster2 adds 12 dB or 20 dB of clean gain to each mic for acoustic instruments, vocals and room miking.\u003c\/p\u003e\n\n\u003ch3\u003eThe R-10 Pair\u003c\/h3\u003e\n\u003cp\u003eEach R-10 uses the 2.5-micron aluminum ribbon from the R-121, with a three-layer windscreen and an internally shock-mounted transducer. As a figure-8 pair they suit Blumlein and mid-side stereo, spaced pairs on piano and drum overheads. Both mics are hand-built in Burbank, California.\u003c\/p\u003e\n\n\u003ch3\u003eThe dBooster2\u003c\/h3\u003e\n\u003cp\u003eThe dBooster2 has two independent channels, so you can boost both mics, run two DIs, or use one channel for each. In mic mode each channel adds 12 dB or 20 dB of gain through a Class A input, and in DI mode the Hi-Z input takes guitar or bass at 0 dB or 8 dB of gain. It runs on 48 V phantom power, protects the ribbons from phantom power, and its balanced low-impedance outputs can drive an interface directly or feed long cable runs, mic splitters and vintage-style preamps.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMatched pair of Royer R-10 passive figure-8 ribbon microphones\u003c\/li\u003e\n  \u003cli\u003eRoyer dBooster2 two-channel in-line signal booster and DI\u003c\/li\u003e\n  \u003cli\u003eR-10s handle over 160 dB SPL at 1 kHz\u003c\/li\u003e\n  \u003cli\u003eThree-layer windscreen and internally shock-mounted transducer on each mic\u003c\/li\u003e\n  \u003cli\u003edBooster2 gain: 12 dB or 20 dB per channel in mic mode, 0 dB or 8 dB in DI mode\u003c\/li\u003e\n  \u003cli\u003edBooster2 Class A inputs with high input impedance to minimize mic loading\u003c\/li\u003e\n  \u003cli\u003edBooster2 protects ribbon mics from phantom power and provides electrical isolation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eR-10 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOperating principle:\u003c\/strong\u003e Electrodynamic pressure gradient\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePolar pattern:\u003c\/strong\u003e Figure-8\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eElement:\u003c\/strong\u003e 2.5-micron aluminum ribbon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMagnets:\u003c\/strong\u003e Rare earth neodymium (grade 52)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 30 Hz to 15 kHz, +\/- 3 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e -54 dBV (re. 1 V\/Pa)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 100 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended load impedance:\u003c\/strong\u003e 700 ohms or greater\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e Over 160 dB at 1 kHz, over 135 dB at 50 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput connector:\u003c\/strong\u003e 3-pin male XLR (pin 2 hot)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 149 mm (5 7\/8 in) long including mounting base, 35 mm (1 3\/8 in) wide\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 368 g (13 oz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e Five years; first re-ribbon free to the original owner within the first year\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003edBooster2 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 2, fully independent\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 12 dB or 20 dB in mic mode, 0 dB or 8 dB in DI mode, switchable per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz, +\/- 0.25 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e 0.0015% at 20 dB gain (-25 dBu input), 0.001% at 12 dB gain (-6 dBu input)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelf-noise:\u003c\/strong\u003e Under 11 dBA at 20 dB, under 15 dBA at 12 dB (referred to -48 dB re. 1 V\/Pa)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeadroom:\u003c\/strong\u003e 127 dB at the 20 dB setting, 120 dB at the 12 dB setting\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 3.6 kilohms in mic mode\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 300 ohms (20 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x combo jack: balanced XLR for mic, unbalanced 1\/4-inch for Hi-Z instruments\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 x balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 48 V phantom\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 98.4 x 98.4 x 44.5 mm (3.875 x 3.875 x 1.75 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 289 g (10.2 oz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e One year, parts and labor\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2 x Royer R-10 ribbon microphone (matched pair)\u003c\/li\u003e\n  \u003cli\u003e2 x swivel microphone mount\u003c\/li\u003e\n  \u003cli\u003e2 x mic sock\u003c\/li\u003e\n  \u003cli\u003eAluminum carrying case\u003c\/li\u003e\n  \u003cli\u003eRoyer dBooster2 (R-DB22) two-channel signal booster and DI\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Royer","offers":[{"title":"Default Title","offer_id":67380178813177,"sku":"RO-R10MP\/DB22","price":2099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/r10mp-db22-bundle.jpg?v=1792175461","url":"https:\/\/blackoutaudio.com\/products\/royer-ro-r10mp-db22","provider":"Blackout Audio","version":"1.0","type":"link"}