{"product_id":"fluid-audio-1358-4164","title":"Fluid Audio Image 1","description":"\u003cp\u003eImage 1 is a dedicated nearfield\/midfield workhorse. Using the latest DSP and Class-D amplification, Fluid Professional has pushed the limits to create stunning results. The Image 1 delivers accurate imaging, extremely flat frequency response, and incredible bass extension with very low distortion.\n\n\u003c\/p\u003e\n\u003cp\u003eWith support for Sonarworks SoundID Reference calibration import, the room calibration software will be integrated directly into Image 1 studio monitors.\nGiving users the ability to create their own calibration profile for their monitor setups to remove unwanted coloration and experience the most accurate studio reference sound for any studio or home environment.\u003c\/p\u003e\n\u003cp\u003eThe Image 1 is also a 2 in 1 monitor: a full range mixing and mastering system that can switch into CubeMix mode directly via the DCT Software. CubeMix mode enables engineers to fine-tune low end and midrange levels for consistent playback across “bass-challenged” devices. It also helps refine vocal balance, kick definition, and overall mix translation.\n\n\u003c\/p\u003e\n\u003cp\u003eIt's future-ready network port expands the Image 1’s incredible functionality and provides the ability to upload and run exported room correction files natively at the monitor level, as well switching between profiles (Image 1 supports loading of 4 different SoundID Reference profiles) and cubemix mode and more.\n\n\u003c\/p\u003e\n\u003cp\u003eThe newly developed AMT tweeter delivers precise, detailed response, expansive headroom, and low distortion, while the 5″ aluminum cone mid-range driver utilizes a shorting ring within its motor structure to substantially reduce harmonic distortion. Focusing the magnetic flux and concentrating it within the voice coil gap reduces modulation movement of the voice coil which makes the variation of system inductances more linear as input current varies. The end result is accuracy so clean; mixing takes on a whole new flow.\n\n\u003c\/p\u003e\n\u003cp\u003eThe opposed dual 6.5\" ultra long throw woofers are coupled through Fluid’s Vi-bracer (TM) system, which applies controlled outward pressure to cancel reaction forces at the source. This design enhances cabinet stability and delivers an extended, balanced low-frequency response (+\/- 3dB 40Hz–27kHz; +\/- 1.5dB 80Hz–22kHz). Each woofer is powered by a dedicated 180W Class-D amplifier for precise, distortion-free control.\n\n\u003c\/p\u003e\n\u003cp\u003eDriving the entire system is the newly developed Class-D Quad amplifier. Spending the most development time on this important element, the Image 1 amp has extremely low self-noise, very low distortion, improved THD+N performance, improved IMD performance, and lower output impedance. The Image 1’s sealed enclosure design provides a natural, 6db\/oct roll off for a more controlled low frequency response. This translates into less likelihood of unwanted interaction with the room, which means these monitors are less sensitive to positioning.\n\n\u003c\/p\u003e\n\u003cp\u003eMixing or mastering on the Image 1 will deliver professional results that are more accurate, and more effortlessly achieved than ever before.\nMaking it one of the best speaker for music production.\u003c\/p\u003e\n\u003ch3\u003eSoundID Reference integration\u003c\/h3\u003e\n\u003cp\u003eImport room correction files directly to Image 1, store up to 4 profiles, and switch at the monitor. Achieve consistent reference sound in any space.\n\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNative profile storage (up to 4)\u003c\/li\u003e\n\u003cli\u003eNetwork profile upload workflow\u003c\/li\u003e\n\u003cli\u003ePer-room or per-position presets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e2 in 1: CubeMix mode\u003c\/h3\u003e\n\u003cp\u003eSwitch to a mid-focused reference directly in the DCT software. Reveal bass-limited playback behavior and fine-tune vocals, kick, and midrange with confidence.\n\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstant A\/B via DCT software\u003c\/li\u003e\n\u003cli\u003eFaster low-end decisions\u003c\/li\u003e\n\u003cli\u003eBetter small-speaker translation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eVi-bracer (TM) Technology - precision through opposing force\u003c\/h3\u003e\n\u003cp\u003eDual low-frequency motors are tied together by a rigid internal pole that applies outward pressure. This controlled compression cancels reaction forces before they reach the cabinet. Vibrations never develop, resonance is suppressed, and bass stays deep, fast, and free of coloration.\n\n\u003c\/p\u003e\n\u003ch3\u003eACCURATE AND TRANSPARENT\u003c\/h3\u003e\n\u003cp\u003eUsing the Fluid Audio DCT (DSP Configuration Tool) you can push SoundID Reference calibration profiles to the built-in embedded DSP platform onboard the Image 1.\n\u003c\/p\u003e\n\u003cp\u003eThis will compensate for room imperfections that acoustically treated and un-treated rooms sometimes have. Using SoundID Reference (v5.6 and newer) and a measuring microphone, you can measure your room, create calibration curves specifically for your environment and upload them directly onto the Image 1 with the DCT tool. The Image 1 supports up to 4 different profiles. As an example: Flat target, Dolby Atmos Music, Custom Target as well as Translation Check. All of these can be loaded as different profiles and switched between using the DCT tool running on Windows or OSX. (Network cable has to be connected to both units). You can also enable and disable cubemix mode using the DCT tool (which will not affected by the calibration profiles).\n\n\u003c\/p\u003e\n\u003ch3\u003eCOMPACT ALL IN ONE\u003c\/h3\u003e\n\u003cp\u003eFluid Audio has ingeniously incorporated precision accuracy, controlled directivity. Impressively, this system maintains an extended bass response down to -3dB @40Hz (in chamber), ensuring a comprehensive audio experience. The Image 1 stands as a testament to uncompromising audio quality, catering to the discerning preferences of recording engineers and audio enthusiasts alike.\n\n\u003c\/p\u003e\n\u003cp\u003eIn essence, Fluid Audio’s Image 1 offers a complete audio solution, blending pinpoint accuracy, directional control, and a diverse range of input options, all within a space-saving design. Its exceptional bass performance makes it a preferred choice for those seeking exceptional sound quality in a compact format.\n\n\u003c\/p\u003e\n\u003ch3\u003eDSP AND CONVERTERS\u003c\/h3\u003e\n\u003cp\u003eFluid Audio Image 1 DSP board feature great performance in every aspect. Flagship discrete AD\/DA converters. Together with well optimized signal circuitry improves the S\/N ratio to 115 dBa.\n\n\u003c\/p\u003e\n\u003cp\u003eThe in-house developed digital signal processing system introduces a range of features that greatly enhance the studio experience. In addition to the analog XLR input, there are an AES digital in and thru enabling the possibility of daisy chaining two Image 1 speakers. Moreover, the digital connection bypasses interface conversions, effectively reducing unwanted artifacts.\n\n\u003c\/p\u003e\n\u003ch3\u003eReady for Immersive and Atmos\u003c\/h3\u003e\n\u003cp\u003eThe Image 1 is a natural fit for immersive and Dolby Atmos systems thanks to its compact cabinet, mounting flexibility, and full-range clarity. Perfect for height and surround channels where precision and headroom are critical.\n\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact size that packs a punch\u003c\/li\u003e\n\u003cli\u003eIntegrated mounting holes for flexible placement\u003c\/li\u003e\n\u003cli\u003eConsistent voicing across multi-speaker layouts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMax SPL of 108dB (1 meter) \u003c\/li\u003e\n\u003cli\u003eFrequency Response: +\/-4.6dB 40Hz – 20kHz; +\/-2.0dB 80Hz – 20kHz\u003c\/li\u003e\n\u003cli\u003eBass Response: -3dB @45Hz, Q=0. 707 Slope = 24dB\/octave\u003c\/li\u003e\n\u003cli\u003eBass \/ Mid  Crossover: 190Hz\u003c\/li\u003e\n\u003cli\u003eMid \/ Treble Crossover: 3000 Hz\u003c\/li\u003e\n\u003cli\u003e2 x 6.5\" Bass + 1 x 4\" Midrange + ⌀ 1.1\" x 1.7\" AMT Tweeter\u003c\/li\u003e\n\u003cli\u003e2 x ⌀ 165 mm Bass + ⌀ 101 mm Midrange + ⌀ 28 x 43 mm AMT Tweeter\u003c\/li\u003e\n\u003cli\u003eAMT Tweeter unfolded size 4.5\" x 1.1\" \/ 114 x 28 mm (total radiation area)\u003c\/li\u003e\n\u003cli\u003e2 * 150 W Bass (Class D)\u003c\/li\u003e\n\u003cli\u003e100 W Midrange (Class D)\u003c\/li\u003e\n\u003cli\u003e75 W Treble (Class D)\u003c\/li\u003e\n\u003cli\u003eAD Converter : 24 bit\u003c\/li\u003e\n\u003cli\u003eInternal sample rate : 192kHz\u003c\/li\u003e\n\u003cli\u003eAnalog XLR, XLR Digital AES \/ EBU, XLR Digital AES \/ EBU Thru connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRear Panel Adjustment \u0026amp; Other Information\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Freq: -1, 0, +1\u003c\/li\u003e\n\u003cli\u003eMid Freq: -1, 0, +1\u003c\/li\u003e\n\u003cli\u003eLow Freq: -2, -1, 0, +1, +2\u003c\/li\u003e\n\u003cli\u003eDigital \/ Analog selector\u003c\/li\u003e\n\u003cli\u003eChannel sellect digital input L\/R\u003c\/li\u003e\n\u003cli\u003eAuto standby On\/Off\u003c\/li\u003e\n\u003cli\u003eGND lift\u003c\/li\u003e\n\u003cli\u003eNetwork RJ45 connector for DCT\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fluid Audio","offers":[{"title":"Default Title","offer_id":48808307720441,"sku":"1358-4164","price":2075.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/Image1_hero.avif?v=1786484306","url":"https:\/\/blackoutaudio.com\/products\/fluid-audio-1358-4164","provider":"Blackout Audio","version":"1.0","type":"link"}