{"product_id":"dynaudio-core-7","title":"Dynaudio Core 7 2-Way Active Studio Monitor (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core 7 is a 2-way active reference monitor for recording, mixing and mastering rooms, broadcast trucks, dub stages and immersive mix rooms. A 7-inch MSP mid\/woofer and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome each have their own Pascal Class D amplifier, 500 W and 150 W. The Core 7 reaches 118 dB in half space and covers 40 Hz to 27 kHz within 3 dB, and a 32 mm front baffle keeps the cabinet stiff and inert.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 7 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\n\u003ch3\u003eLevels and Placement\u003c\/h3\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 101 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 7 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\u003cp\u003eAnalog signals are converted at 24 bits and processed at 192 kHz in 64-bit DSP. The cabinet has indentations on all four sides, so the Core 7 can stand upright, lie on its side or run inverted with the woofer on top. Dynaudio's Core Mounting Bracket (Type 1) holds it in surround and immersive layouts.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-way active design with a DSP crossover at 2,300 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e7-inch MSP (Magnesium Silicate Polymer) mid\/woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification, 500 W woofer and 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003e32 mm front baffle and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMid\/woofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 2,300 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 40 Hz to 27 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 36 Hz to 29 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB at 1 m anechoic, 118 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 220 x 390 x 355 mm (8 5\/8 x 15 3\/8 x 14 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.6 kg (32.1 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380130775289,"sku":"CORE-7","price":2649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-7-1.jpg?v=1792176288","url":"https:\/\/blackoutaudio.com\/products\/dynaudio-core-7","provider":"Blackout Audio","version":"1.0","type":"link"}