{"product_id":"dynaudio-core-5","title":"Dynaudio Core 5 2-Way Active Studio Monitor (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core 5 is the smallest speaker in Dynaudio's Core range of professional reference monitors, a 2-way active nearfield design for small control rooms, edit suites, OB trucks and immersive rooms that need many speakers in one space. Each cabinet carries a 5-inch MSP woofer and a 28 mm Cerotar Pro soft-dome tweeter with a Hexis inner dome, each driven by its own 280 W Pascal Class D amplifier. It reaches 110 dB in half space and takes both analog XLR and AES3 digital signals.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 5 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\n\u003ch3\u003eLevels and Placement\u003c\/h3\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (79, 85, 91 or 96 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 5 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\u003cp\u003eIndentations in the cabinet locate the Core 5 on other Core speakers and subwoofers. It can stand on a desk or stand, hang vertically or horizontally from Dynaudio's Core Mounting Bracket (Type 2), or run inverted with the woofer above the tweeter.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-way active design with a DSP crossover at 3,800 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Cerotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e5-inch MSP (Magnesium Silicate Polymer) woofer\u003c\/li\u003e\n  \u003cli\u003eTwo Pascal Class D amplifiers, 280 W each\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003ePower-saving standby after 20 minutes without signal\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Cerotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 5-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 280 W woofer, 280 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 3,800 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 46 Hz to 26 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 42 Hz to 29 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 104 dB at 1 m anechoic, 110 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz, 0.48 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 190 x 353 x 265 mm (7.5 x 14 x 10.4 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.6 kg (19 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380130152697,"sku":"CORE-5","price":2299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-5-1.jpg?v=1792176285","url":"https:\/\/blackoutaudio.com\/products\/dynaudio-core-5","provider":"Blackout Audio","version":"1.0","type":"link"}