{"product_id":"dynaudio-core-47","title":"Dynaudio Core 47 3-Way Active Studio Monitor (Dark Grey, Left)","description":"\u003cp\u003eThe Dynaudio Core 47 is a compact 3-way active reference monitor for music studios, TV dub stages, edit suites, broadcast trucks, ADR rooms and game audio suites, and it works as a surround speaker in multichannel and immersive rooms. A 7-inch MSP woofer, a 4-inch MSP midrange and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome run from three Pascal Class D amplifiers, 500 W, 500 W and 150 W. Crossover points at 475 Hz and 5,250 Hz put more of the vocal range in one driver, which helps with decisions on vocal balance and dialogue.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eDynaudio builds the Core 47 in two mirrored models, with the woofer on either side of the tweeter and midrange, and the manual calls for horizontal placement only. This listing is the left speaker, sold singly, with the woofer to the right of the tweeter and midrange as seen from the front. Add a Core 47 Right for a stereo pair. The pair can run tweeters-in or tweeters-out to suit the room and listening position.\u003c\/p\u003e\n\u003cp\u003eA 44 mm front bezel stiffens the cabinet. Indentations on all four sides take Dynaudio's isolation pads, and the Core Mounting Bracket (Type 1) holds the Core 47 in surround and immersive layouts.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 47 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 105 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 47 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way active design with DSP crossovers at 475 Hz and 5,250 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e4-inch MSP midrange and 7-inch MSP woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification: 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003e44 mm front bezel and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 475 Hz and 5,250 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 41 Hz to 24 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 35 Hz to 30 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 113 dB at 1 m anechoic, 118 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 390 x 240 x 355 mm (15 3\/8 x 9 7\/16 x 14 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.6 kg (34.4 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, left speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380132118777,"sku":"CORE-47\/L","price":3399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-47-1.jpg?v=1792176291","url":"https:\/\/blackoutaudio.com\/products\/dynaudio-core-47","provider":"Blackout Audio","version":"1.0","type":"link"}