{"product_id":"dynaudio-18s","title":"Dynaudio 18S Studio Subwoofer","description":"\u003cp\u003eThe Dynaudio 18S is an active DSP subwoofer that extends Dynaudio studio monitors into the deep bass, turning a two-way stereo or surround setup into a three-way system for mixing and mastering. Two opposed 9-inch MSP+ Hybrid Drive long-throw woofers sit in a sealed cabinet, driven by a 500 W Class D amplifier, and reach down to 16 Hz. Built-in presets match the crossover to BM, LYD and other Dynaudio monitors, while distance alignment and parametric EQ fit the sub to your room.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to Dynaudio Monitors\u003c\/h3\u003e\n\u003cp\u003eDynaudio measured its studio monitors and stored a performance map for each one in the 18S. Choose your speaker model on the rear-panel display and the sub sets its low-pass filter to suit. Presets cover the BM6 and BM15 Classic, BM5 mkIII, LYD 5, LYD 7, LYD 8, LYD 48 and M5P, and Dynaudio adds new models through firmware updates over USB. With speakers from other makers, you set the low-pass frequency yourself.\u003c\/p\u003e\n\n\u003ch3\u003eSetup and Room Tuning\u003c\/h3\u003e\n\u003cp\u003eEnter the distance from the listening position to each monitor and to the sub, and the 18S applies time and phase delay so its bass arrives in step with the speakers. Three bands of parametric EQ pull down room modes, and a switchable 80 Hz high-pass filter on the outputs keeps the lowest bass out of the monitors. The monitors connect through the sub's balanced XLR or unbalanced RCA outputs, and a 12 V trigger input handles remote standby control.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo opposed 9-inch MSP+ Hybrid Drive long-throw woofers in a sealed cabinet\u003c\/li\u003e\n  \u003cli\u003e500 W Class D amplifier\u003c\/li\u003e\n  \u003cli\u003eDSP presets for Dynaudio BM, LYD and M5P monitors\u003c\/li\u003e\n  \u003cli\u003eDistance compensation with time and phase delay\u003c\/li\u003e\n  \u003cli\u003eThree-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eSwitchable 80 Hz Linkwitz-Riley high-pass filter on the outputs\u003c\/li\u003e\n  \u003cli\u003eRear-panel display and rotary controller for setup\u003c\/li\u003e\n  \u003cli\u003eMaster and slave operation for multiple subwoofers\u003c\/li\u003e\n  \u003cli\u003eAuto standby and 12 V trigger input\u003c\/li\u003e\n  \u003cli\u003eUSB service port for firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active DSP subwoofer, sealed enclosure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 9\" MSP+ Hybrid Drive, opposed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e 500 W Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 16 Hz to 230 Hz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 110 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x balanced XLR, 2 x unbalanced RCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 x balanced XLR, 2 x unbalanced RCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-pass filter:\u003c\/strong\u003e Preset or adjustable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-pass filter (outputs):\u003c\/strong\u003e 80 Hz, switchable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 0 or 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrigger input:\u003c\/strong\u003e 5 to 12 V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC power:\u003c\/strong\u003e 100-120 V \/ 200-240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 490 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 447 x 300 x 268 mm (17 5\/8 x 11 3\/4 x 10 1\/2 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.1 kg (48.7 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio 18S subwoofer\u003c\/li\u003e\n  \u003cli\u003eMains power cable\u003c\/li\u003e\n  \u003cli\u003eDocument pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380139786489,"sku":"18S","price":2199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-18s-1.jpg?v=1792176493","url":"https:\/\/blackoutaudio.com\/products\/dynaudio-18s","provider":"Blackout Audio","version":"1.0","type":"link"}