{"product_id":"dbx-dbx223xsv","title":"dbx 223xs Stereo 2-Way\/Mono 3-Way Crossover with XLR Connectors","description":"\u003cp\u003eThe dbx 223xs is a two-channel active crossover for PA systems. It works as a stereo 2-way or a mono 3-way crossover and sends each amplifier only the frequency band its loudspeaker driver reproduces, so the amplifiers put their power into usable signal.\u003c\/p\u003e\u003cp\u003eLinkwitz-Riley filters with a 24 dB per octave slope divide the signal. Every output has its own level control and phase invert switch, and both channels have a 40 Hz low-cut filter and a x10 range switch. The LF Sum switch combines the low frequencies into one subwoofer feed for a stereo system with a single sub. Inputs and outputs are balanced XLR connectors.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eStereo 2-way or mono 3-way operation, set with a mode switch\u003c\/li\u003e\n\u003cli\u003e24 dB per octave Linkwitz-Riley filters\u003c\/li\u003e\n\u003cli\u003eLow-frequency summed (subwoofer) output\u003c\/li\u003e\n\u003cli\u003ex10 range switch on both channels\u003c\/li\u003e\n\u003cli\u003e40 Hz high-pass (low-cut) filter on both channels\u003c\/li\u003e\n\u003cli\u003ePhase invert switch on every output\u003c\/li\u003e\n\u003cli\u003eIndividual level control on every output\u003c\/li\u003e\n\u003cli\u003eStereo and mono status LEDs show the selected mode\u003c\/li\u003e\n\u003cli\u003eBalanced XLR inputs and outputs\u003c\/li\u003e\n\u003cli\u003eCSA NRTL\/C approved and CE compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Stereo 2-way or mono 3-way\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Connectors:\u003c\/strong\u003e XLR, pin 2 hot\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Type:\u003c\/strong\u003e Electronically balanced\/unbalanced, RF filtered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e More than 50k ohms balanced, more than 25k ohms unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e More than +22 dBu, balanced or unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMRR:\u003c\/strong\u003e More than 40 dB, typically more than 55 dB at 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Connectors:\u003c\/strong\u003e XLR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Type:\u003c\/strong\u003e Impedance-balanced\/unbalanced, RF filtered\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 200 ohms balanced, 100 ohms unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e More than +21 dBu into 2k ohms or greater\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBandwidth:\u003c\/strong\u003e 20 Hz to 20 kHz, ±0.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e Under 3 Hz to over 90 kHz, +0\/-3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio, Stereo Mode:\u003c\/strong\u003e More than 94 dB (low output), more than 91 dB (high output), ref. +4 dBu, 22 kHz bandwidth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-Noise Ratio, Mono Mode:\u003c\/strong\u003e More than 94 dB (low), 93 dB (mid) and 91 dB (high output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Range:\u003c\/strong\u003e More than 106 dB unweighted, any output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+Noise:\u003c\/strong\u003e Less than 0.004% at +4 dBu, 1 kHz; less than 0.04% at +20 dBu, 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterchannel Crosstalk:\u003c\/strong\u003e Below -80 dB, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover Frequencies, Stereo Mode:\u003c\/strong\u003e Low\/high: 45 to 960 Hz, or 450 Hz to 9.6 kHz with the x10 switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover Frequencies, Mono Mode:\u003c\/strong\u003e Low\/mid and mid\/high: 45 to 960 Hz each, or 450 Hz to 9.6 kHz with the x10 switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFilter Type:\u003c\/strong\u003e Linkwitz-Riley, 24 dB\/octave, state-variable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Cut Filter:\u003c\/strong\u003e 40 Hz Butterworth, 12 dB\/octave, one switch per channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 15 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connector:\u003c\/strong\u003e IEC receptacle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 32 to 113°F (0 to 45°C)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 1.75 x 19 x 6.9 in. (4.4 x 48.3 x 17.5 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.7 lb (1.7 kg)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"dbx","offers":[{"title":"Default Title","offer_id":67645396877561,"sku":"DBX223XSV","price":419.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/DBX223XSV.jpg?v=1794258281","url":"https:\/\/blackoutaudio.com\/products\/dbx-dbx223xsv","provider":"Blackout Audio","version":"1.0","type":"link"}