{"product_id":"crown-dci8x600da","title":"Crown DCi 8|600DA Installation Power Amplifier with Dante and AES67","description":"\u003cp\u003eThe DCi 8|600DA is an eight-channel installation amplifier from the Crown DriveCore Install DA series, rated at 600W per channel into 4 ohms, with Dante and AES67 networked audio built in. Redundant primary and secondary network ports accept 48 kHz or 96 kHz audio, and the amplifier can also send its analog inputs onto the network, before or after processing, at 48 kHz.\u003c\/p\u003e\u003cp\u003eThe onboard DSP includes JBL speaker tunings, and each channel drives 2, 4, 8 or 16 ohm loads or a 70V or 100V line. Support for Dante Domain Manager suits installations standardized on Dante. Configuration, monitoring and control run over standard TCP\/IP with HiQnet Audio Architect software. It is EN 54-16 compliant for life safety applications, certified as part of an EN 54-16 voice alarm control and indicating equipment (VACIE) system.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIntegrated Dante and AES67 networked audio with Dante Domain Manager support\u003c\/li\u003e\n\u003cli\u003eRedundant, independent primary and secondary Dante\/AES67 ports, 48 kHz or 96 kHz\u003c\/li\u003e\n\u003cli\u003eSends Dante\/AES67 audio from the analog inputs, before or after processing, at 48 kHz\u003c\/li\u003e\n\u003cli\u003eDSP at 48 kHz with 20 presets: input router with high, medium and low priority inputs, input delay up to 2 seconds, input and output EQ, crossover, matrix router, output delay up to 100 ms and LevelMAX limiters\u003c\/li\u003e\n\u003cli\u003eJBL speaker tunings\u003c\/li\u003e\n\u003cli\u003eLoad monitoring with a pilot tone (normal and burst modes), plus continuous and sweep monitoring\u003c\/li\u003e\n\u003cli\u003eChannel auto-standby\u003c\/li\u003e\n\u003cli\u003eProgrammable GPIO for volume control, preset recall or fault reporting to a third-party control system\u003c\/li\u003e\n\u003cli\u003eSleep contact closure and amp status output\u003c\/li\u003e\n\u003cli\u003eUniversal PFC power supply, removable air filters and front-panel LED indicators\u003c\/li\u003e\n\u003cli\u003eEN 54-16 compliant for life safety applications\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Analog, plus Dante\/AES67 on primary and secondary ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power per channel, all channels driven:\u003c\/strong\u003e 300W at 2 ohms, 600W at 4 ohms, 600W at 8 ohms, 300W at 16 ohms, 600W at 70V, 600W at 100V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge mono output power:\u003c\/strong\u003e 600W at 4 ohms, 1200W at 8 ohms, 1200W at 16 ohms, 1200W at 140V, 1200W at 200V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating:\u003c\/strong\u003e Minimum guaranteed power, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e ±0.25 dB, 20 Hz to 20 kHz (8 ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.35% at full rated power, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e More than 1000 (20 Hz to 100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad impedance:\u003c\/strong\u003e 2 to 16 ohms, 70V and 100V (dual mode); 4 to 16 ohms, 140V and 200V (bridge mono)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Continuously variable speed forced air, front-to-back airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fan noise:\u003c\/strong\u003e 47 dBA SPL at 1 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC mains:\u003c\/strong\u003e 100 to 240V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connector:\u003c\/strong\u003e 20A IEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack space:\u003c\/strong\u003e 2U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 19 x 3.5 x 17 in. (483 x 89 x 432 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 lb (13.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDCi 8|600DA amplifier\u003c\/li\u003e\n\u003cli\u003eAC power cord\u003c\/li\u003e\n\u003cli\u003ePlug-in input connectors\u003c\/li\u003e\n\u003cli\u003eSpade connectors for the speaker outputs\u003c\/li\u003e\n\u003cli\u003eSmall and large ferrites for the network and Dante cables\u003c\/li\u003e\n\u003cli\u003eImportant Safety Instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crown","offers":[{"title":"Default Title","offer_id":67645407133945,"sku":"DCI8X600DA","price":12949.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/DCI8X600DA_bc019c9c-4bfe-4a18-8fe4-9dfb29f43019.jpg?v=1794258474","url":"https:\/\/blackoutaudio.com\/products\/crown-dci8x600da","provider":"Blackout Audio","version":"1.0","type":"link"}