{"product_id":"crown-dci4x1250n","title":"Crown DCi 4|1250N Network Installation Power Amplifier with BLU link","description":"\u003cp\u003eThe DCi 4|1250N is a four-channel networked installation amplifier from the Crown DriveCore Install Network series, rated at 1250W per channel into 4 ohms. It takes balanced analog inputs and BLU link digital audio, and its priority input router switches to the other input automatically if the primary signal is lost.\u003c\/p\u003e\u003cp\u003eEach channel drives low-impedance speakers or a 70V or 100V line directly. Monitoring and control run over a standard TCP\/IP network with HiQnet, so HiQnet Audio Architect software and the Powered by Crown app can see and adjust every networked DCi amplifier.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBLU link digital audio input plus balanced analog inputs\u003c\/li\u003e\n\u003cli\u003ePriority input router switches to the backup input if the primary signal is lost\u003c\/li\u003e\n\u003cli\u003eOnboard DSP: LevelMAX limiters, input and output EQ, crossover, delay, matrix mixer and speaker line monitoring\u003c\/li\u003e\n\u003cli\u003eNetwork monitoring and control over standard TCP\/IP with HiQnet, for HiQnet Audio Architect software and the Powered by Crown app\u003c\/li\u003e\n\u003cli\u003eProgrammable GPIO ports for volume control, preset recall or fault reporting to a control computer\u003c\/li\u003e\n\u003cli\u003eDirect drive 70V or 100V output on each channel\u003c\/li\u003e\n\u003cli\u003eBridge mono mode on channel pairs\u003c\/li\u003e\n\u003cli\u003eDriveCore amplifier technology in a 2U chassis\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog and BLU link\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power per channel, all channels driven:\u003c\/strong\u003e 1250W at 2 ohms, 1250W at 4 ohms, 1250W at 8 ohms, 625W at 16 ohms, 1250W at 70V, 1250W at 100V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge mono output power:\u003c\/strong\u003e 2500W at 4 ohms, 2500W at 8 ohms, 2500W at 16 ohms, 2500W at 140V, 2500W at 200V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating:\u003c\/strong\u003e Minimum guaranteed power, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e ±0.25 dB, 20 Hz to 20 kHz (8 ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.35% at full rated power, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBLU link input signal-to-noise ratio:\u003c\/strong\u003e More than 104 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage gain:\u003c\/strong\u003e 34 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10k ohms balanced, 5k ohms unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum input level:\u003c\/strong\u003e +20 dBu before compression\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e More than 1500 (20 Hz to 100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad impedance:\u003c\/strong\u003e 2 to 16 ohms, 70V and 100V (dual mode); 4 to 16 ohms, 140V and 200V (bridge mono)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling:\u003c\/strong\u003e Continuously variable speed forced air, front-to-back airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum fan noise:\u003c\/strong\u003e 47 dBA SPL at 1 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC mains:\u003c\/strong\u003e 100 to 240V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connector:\u003c\/strong\u003e 20A IEC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRack space:\u003c\/strong\u003e 2U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 19 x 3.5 x 17 in. (483 x 89 x 432 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 lb (13.6 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDCi 4|1250N amplifier\u003c\/li\u003e\n\u003cli\u003eAC power cord\u003c\/li\u003e\n\u003cli\u003ePlug-in input connectors\u003c\/li\u003e\n\u003cli\u003eSpade connectors for the speaker outputs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crown","offers":[{"title":"Default Title","offer_id":67645407265017,"sku":"DCI4X1250N","price":8029.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/DCI4X1250N.jpg?v=1794258475","url":"https:\/\/blackoutaudio.com\/products\/crown-dci4x1250n","provider":"Blackout Audio","version":"1.0","type":"link"}