{"product_id":"crown-cdi4x600","title":"Crown CDi 4|600 DriveCore Installation Power Amplifier","description":"\u003cp\u003eThe CDi 4|600 is a four-channel installation amplifier from the Crown CDi DriveCore series, rated at 600W per channel into 4 ohms. Each channel drives low-impedance speakers or a 70V or 100V distributed speaker line directly, with no output transformer. It suits medium-sized installations such as cinemas, houses of worship, bars and lounges.\u003c\/p\u003e\u003cp\u003eThe onboard DSP comes loaded with JBL speaker tunings. Set the amplifier up from the front panel, or configure and monitor it over a standard network with HiQnet Audio Architect software.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDriveCore technology, which removes hundreds of components from each amplifier\u003c\/li\u003e\n\u003cli\u003eDirect drive 70V or 100V output on every channel, with no step-up transformer\u003c\/li\u003e\n\u003cli\u003eBridge mono mode on channel pairs for higher-power loads\u003c\/li\u003e\n\u003cli\u003eOnboard DSP: input router, input delay up to 1000 ms, 8-band input parametric EQ, crossover, 8-band output parametric EQ, output delay up to 100 ms and LevelMAX limiter\u003c\/li\u003e\n\u003cli\u003ePreloaded JBL speaker tunings\u003c\/li\u003e\n\u003cli\u003eFront-panel interface for complete setup at the amplifier\u003c\/li\u003e\n\u003cli\u003eNetwork control and monitoring over standard TCP\/IP with HiQnet Audio Architect software\u003c\/li\u003e\n\u003cli\u003eCombined GPIO\/aux port to recall presets, mute channels, monitor faults and switch the amplifier on or off\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Analog\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power per channel, all channels driven:\u003c\/strong\u003e 300W at 2 ohms, 600W at 4 ohms, 600W at 8 ohms, 300W at 16 ohms, 600W at 70V, 600W at 100V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBridge mono output power:\u003c\/strong\u003e 600W at 4 ohms, 1200W at 8 ohms, 1200W at 16 ohms, 1200W at 140V, 1200W at 200V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower rating:\u003c\/strong\u003e Minimum guaranteed power at 1 kHz, all channels driven, 0.5% maximum distortion, 0.5 second duration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e 0.7V RMS for full rated power at 8 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal-to-noise ratio:\u003c\/strong\u003e More than 104 dB (analog input, ref. rated power, 20 Hz to 20 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.35% at full rated power, 20 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e ±0.25 dB, 20 Hz to 20 kHz (8 ohms)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e More than 1000 (20 Hz to 100 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrosstalk:\u003c\/strong\u003e More than 80 dB (20 Hz to 1 kHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 10k ohms balanced, 5k ohms unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC power:\u003c\/strong\u003e 15A IEC, 100 to 240V AC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 19 x 3.5 x 12.25 in. (48.3 x 8.9 x 31.1 cm), depth without the 1.3 in. (3.3 cm) front panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 16.3 lb (7.39 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCDi 4|600 amplifier\u003c\/li\u003e\n\u003cli\u003eAC power cord\u003c\/li\u003e\n\u003cli\u003ePlug-in input connectors\u003c\/li\u003e\n\u003cli\u003eTerminal fork connectors for the speaker outputs\u003c\/li\u003e\n\u003cli\u003eImportant Safety Instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Crown","offers":[{"title":"Default Title","offer_id":67645406085369,"sku":"CDI4X600","price":4629.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/Crown_CDi_DriveCore_4600_Front_full_width.jpg?v=1794258474","url":"https:\/\/blackoutaudio.com\/products\/crown-cdi4x600","provider":"Blackout Audio","version":"1.0","type":"link"}