{"product_id":"blackstar-htv-50-mkiii","title":"Blackstar HT Club 50H MK III Guitar Amplifier Head","description":"\u003cp\u003eThe Blackstar HT Club 50H MK III takes the two-channel, four-voice preamp of the HT Club 40 MK III and pairs it with a 50 W EL34 power section in a head that weighs 14.6 kg. It suits guitarists who already own a cabinet and play clubs, rehearse or record. The included FS-15 footswitch changes channels and voices, a front switch drops the output to 5 W, and CabRig outputs with USB-C audio cover silent recording and practice.\u003c\/p\u003e\n\n\u003ch3\u003eChannels and Voices\u003c\/h3\u003e\n\u003cp\u003eThe clean channel switches between an American voice, bright with a firm low end, and a British voice with looser bass and a warmer midrange that breaks up when you push it. The voice switch changes the preamp voicing, EQ, tube gain structure and power amp damping together. The overdrive channel offers a hot-rodded classic voice and a modern voice with a mid-focused boost ahead of the gain stage and less power amp damping. Blackstar's patented ISF control sweeps the overdrive tone stack from an American response with a tight low end to a woodier British response.\u003c\/p\u003e\n\n\u003ch3\u003eSpeaker Outputs and Recording\u003c\/h3\u003e\n\u003cp\u003eTwo sets of speaker outputs run a single 16 ohm cabinet, a single 8 ohm cabinet or a pair of 16 ohm cabinets. CabRig emulates the power amp, speaker, cabinet, microphone and room, and a rear switch recalls three stored CabRig patches for the balanced XLR output, the stereo line out and headphone jack, and USB-C. Over USB the amp sends four channels to a computer at once: stereo emulated left and right, the preamp signal before reverb and cab emulation, and the dry guitar. It also takes a stereo return from the computer for backing tracks. Blackstar's Architect software edits CabRig and sets reverb decay separately for each channel.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e50 W tube head with 2 x EL34 and 2 x ECC83 tubes\u003c\/li\u003e\n  \u003cli\u003eTwo channels and four voices, all footswitchable\u003c\/li\u003e\n  \u003cli\u003ePatented ISF tone control on the overdrive channel\u003c\/li\u003e\n  \u003cli\u003ePower switch for 50 W or 5 W output\u003c\/li\u003e\n  \u003cli\u003eDigital reverb with a rear Dark (room) and Light (plate) voicing switch\u003c\/li\u003e\n  \u003cli\u003eCabRig speaker emulation with three stored patches, editable in Architect software\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and stereo line out\/headphone outputs that stay live in standby for silent practice\u003c\/li\u003e\n  \u003cli\u003eEffects loop with +4 dBu \/ -10 dBV level switch\u003c\/li\u003e\n  \u003cli\u003eUSB-C audio with 4 channels out and 2 in, using standard drivers\u003c\/li\u003e\n  \u003cli\u003e5-way footcontroller jack for the optional FS-14 (channels, voices, boost and reverb)\u003c\/li\u003e\n  \u003cli\u003e2-way footswitch jack with an external switching mode for TRS switchers\u003c\/li\u003e\n  \u003cli\u003eKensington security slot\u003c\/li\u003e\n  \u003cli\u003eDesigned to accept 6L6 power tubes after rebiasing at an approved Blackstar service center\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 50 W RMS\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTubes:\u003c\/strong\u003e 2 x EL34 (power), 2 x ECC83 (preamp)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e Clean and Overdrive, two voices each\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eClean controls:\u003c\/strong\u003e Volume, Voice, Bass, Treble\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOverdrive controls:\u003c\/strong\u003e OD Select, Gain, Voice, Volume, Bass, Middle, Treble, ISF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaster controls:\u003c\/strong\u003e Reverb, Volume, Power (50 W or 5 W)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 1 x 16 ohm; 1 x 8 ohm or 2 x 16 ohm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabRig outputs:\u003c\/strong\u003e Balanced XLR, stereo TRS line out\/headphones\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEffects loop:\u003c\/strong\u003e Send, return, +4 dBu \/ -10 dBV switch\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFootswitch:\u003c\/strong\u003e FS-15 2-way included, optional FS-14 5-way\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e USB-C audio, 4 channels out, 2 channels in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.6 kg (32.2 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 558 x 220 x 245 mm (22.0 x 8.7 x 9.6 in)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlackstar HT Club 50H MK III head\u003c\/li\u003e\n  \u003cli\u003eFS-15 2-way footswitch\u003c\/li\u003e\n  \u003cli\u003eMains power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackstar","offers":[{"title":"Default Title","offer_id":67380216856825,"sku":"HTV-50-MKIII","price":1299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/blackstar-htv-50-mkiii-1.jpg?v=1792174169","url":"https:\/\/blackoutaudio.com\/products\/blackstar-htv-50-mkiii","provider":"Blackout Audio","version":"1.0","type":"link"}