{"product_id":"blackstar-dept10-amped3","title":"Blackstar Dept. 10 AMPED 3 100W 3-Channel Guitar Amp Pedal","description":"\u003cp\u003eThe Blackstar Dept. 10 AMPED 3 is a 100-watt, three-channel guitar amplifier in a floor pedal, aimed at players who want a high-gain amp that fits in a gig bag. Clean, Crunch and Overdrive channels each have two voices, with a built-in boost, reverb and footswitchable patches stored on the unit. It powers an 8 or 16 ohm cabinet, drives the front of another amp from its Out jack, or goes direct with CabRig cabinet simulation, and a power switch drops it to 20 W or 1 W.\u003c\/p\u003e\n\n\u003ch3\u003eChannels, Voices and Patches\u003c\/h3\u003e\n\u003cp\u003eThe six voices are Clean Warm and Clean Bright, Crunch and Super Crunch, and OD 1 and OD 2, from a classic clean sound to tight, aggressive high gain. Blackstar's patented ISF control moves the EQ between an American and a British character, and the Response control sets an EL84, EL34 or 6L6 power stage feel. In Patch mode each channel footswitch recalls a saved sound, and in Manual mode the amp follows the knobs. The boost sits before the preamp for up to 12 dB more drive, or after it for a 6 dB solo lift.\u003c\/p\u003e\n\n\u003ch3\u003eLive and Studio Connectivity\u003c\/h3\u003e\n\u003cp\u003eCabRig cabinet simulation feeds a balanced XLR, a stereo line\/headphone output and USB-C, which records four channels at once. An effects loop switchable between +4 dBu and -10 dBV, MIDI In and Thru, and two isolated 9V outputs for other pedals make it the hub of a pedalboard.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e100 W into 8 or 16 ohms, switchable to 20 W or 1 W\u003c\/li\u003e\n  \u003cli\u003eClean, Crunch and Overdrive channels with two voices each\u003c\/li\u003e\n  \u003cli\u003ePatch mode with footswitch recall, or Manual mode\u003c\/li\u003e\n  \u003cli\u003ePatented ISF tone control\u003c\/li\u003e\n  \u003cli\u003eBuilt-in boost, pre (up to 12 dB) or post (up to 6 dB)\u003c\/li\u003e\n  \u003cli\u003eReverb with Dark and Light types and hold-to-freeze\u003c\/li\u003e\n  \u003cli\u003eEL84, EL34 and 6L6 power valve responses with Presence control\u003c\/li\u003e\n  \u003cli\u003eCabRig speaker simulation with 3 onboard patches, editable in Architect\u003c\/li\u003e\n  \u003cli\u003eUSB-C audio interface with 4 recording channels\u003c\/li\u003e\n  \u003cli\u003eEffects loop with +4 dBu \/ -10 dBV level switch, series or parallel\u003c\/li\u003e\n  \u003cli\u003eMIDI In and Thru, two isolated 9V DC pedal outputs, Kensington lock slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 W RMS, switchable to 20 W or 1 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 x 1\/4\" (8 ohm, 16 ohm), use one at a time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eControls:\u003c\/strong\u003e Gain, Volume, Bass, Middle, Treble, ISF, Boost, Reverb, Presence, Master\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x 1\/4\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\/4\" Out, balanced XLR (CabRig), 1\/4\" TRS stereo line\/headphone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEffects loop:\u003c\/strong\u003e 2 x 1\/4\" (send, return), +4 dBu \/ -10 dBV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMIDI:\u003c\/strong\u003e In and Thru, TRS (5-pin DIN adapter supplied)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e Type-C, 4-channel recording\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePedal power:\u003c\/strong\u003e 2 x isolated 9V DC outputs, center negative, 500 mA combined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 285 x 80 x 150 mm (11.2 x 3.1 x 5.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.98 kg (4.37 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlackstar Dept. 10 AMPED 3\u003c\/li\u003e\n  \u003cli\u003eDetachable IEC mains cable\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003eTRS MIDI to 5-pin MIDI adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackstar","offers":[{"title":"Default Title","offer_id":67380177273081,"sku":"DEPT10-AMPED3","price":809.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/blackstar-dept10-amped3-1.jpg?v=1792173899","url":"https:\/\/blackoutaudio.com\/products\/blackstar-dept10-amped3","provider":"Blackout Audio","version":"1.0","type":"link"}