{"product_id":"blackstar-dept10-amped2","title":"Blackstar Dept. 10 AMPED 2 100W Guitar Amp and Effects Pedal","description":"\u003cp\u003eThe Blackstar Dept. 10 AMPED 2 is a 100-watt guitar amplifier and multi-effects processor in a pedal format. It powers an 8 or 16 ohm cabinet at full output, feeds the front of a traditional amp from its Out jack, or goes direct to a PA or computer. Drive, modulation, delay and reverb sections sit around three preamp voices, and a power switch drops the output to 20 W or 1 W for rehearsal, recording or home use.\u003c\/p\u003e\n\n\u003ch3\u003eAmp Voices and Effects\u003c\/h3\u003e\n\u003cp\u003eThe USA voice is clean and bright with a solid low end, UK follows a British Class A amp of the early '60s, and Classic draws on Blackstar's cascaded valve overdrive circuits with a passive British tone stack. In front of the amp, the Drive section offers Boost, Drive and Fuzz. Modulation covers chorus\/flanger, tremolo and phaser, delay offers Linear, Analog and Shimmer types, and reverb offers Room, Spring and Plate. The Response control sets the feel of an EL84, EL34 or 6L6 power stage.\u003c\/p\u003e\n\n\u003ch3\u003eLive and Studio Connectivity\u003c\/h3\u003e\n\u003cp\u003eCabRig cabinet simulation feeds a balanced XLR, a stereo line\/headphone output and USB-C, which records four channels at once into a computer. An OLED chromatic tuner, tap tempo, MIDI In and Thru, an effects loop switchable between +4 dBu and -10 dBV, and two isolated 9V outputs for other pedals let the AMPED 2 sit at the center of a pedalboard.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e100 W into 8 or 16 ohms, switchable to 20 W or 1 W\u003c\/li\u003e\n  \u003cli\u003eUSA, UK and Classic preamp voices\u003c\/li\u003e\n  \u003cli\u003eDrive section: Boost, Drive and Fuzz\u003c\/li\u003e\n  \u003cli\u003eModulation: chorus\/flanger, tremolo and phaser, placed pre or post amp\u003c\/li\u003e\n  \u003cli\u003eDelay: Linear, Analog and Shimmer, with tap tempo and hold-to-freeze\u003c\/li\u003e\n  \u003cli\u003eReverb: Room, Spring and Plate, with hold-to-freeze\u003c\/li\u003e\n  \u003cli\u003eEL84, EL34 and 6L6 power valve responses\u003c\/li\u003e\n  \u003cli\u003eOLED chromatic tuner\u003c\/li\u003e\n  \u003cli\u003eCabRig speaker simulation with 3 onboard patches, editable in Architect\u003c\/li\u003e\n  \u003cli\u003eUSB-C audio interface with 4 recording channels\u003c\/li\u003e\n  \u003cli\u003eEffects loop with +4 dBu \/ -10 dBV level switch, series or parallel\u003c\/li\u003e\n  \u003cli\u003eMIDI In and Thru, two isolated 9V DC pedal outputs, Kensington lock slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 W RMS, switchable to 20 W or 1 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e 2 x 1\/4\" (8 ohm, 16 ohm), use one at a time\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x 1\/4\"\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\/4\" Out, balanced XLR (CabRig), 1\/4\" TRS stereo line\/headphone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEffects loop:\u003c\/strong\u003e 2 x 1\/4\" (send, return), +4 dBu \/ -10 dBV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMIDI:\u003c\/strong\u003e In and Thru, TRS (5-pin DIN adapter supplied)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e Type-C, 4-channel recording\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePedal power:\u003c\/strong\u003e 2 x isolated 9V DC outputs, center negative, 500 mA combined\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Aluminum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 285 x 80 x 150 mm (11.2 x 3.1 x 5.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.76 kg (3.88 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBlackstar Dept. 10 AMPED 2\u003c\/li\u003e\n  \u003cli\u003eDetachable mains lead\u003c\/li\u003e\n  \u003cli\u003eUSB-C cable\u003c\/li\u003e\n  \u003cli\u003eTRS MIDI to 5-pin MIDI adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Blackstar","offers":[{"title":"Default Title","offer_id":67380175732985,"sku":"DEPT10-AMPED2","price":869.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/blackstar-dept10-amped2-1.jpg?v=1792173886","url":"https:\/\/blackoutaudio.com\/products\/blackstar-dept10-amped2","provider":"Blackout Audio","version":"1.0","type":"link"}