{"title":"Dynaudio","description":"\u003cp\u003eStudio monitors, subwoofers and amplifiers.\u003c\/p\u003e","products":[{"product_id":"dynaudio-m1mkii","title":"Dynaudio M1 MkII Passive 2-Way Nearfield Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio Acoustics M1 MkII is a compact passive nearfield monitor for music and post-production engineers who work at high volume for long sessions. Two 18 cm MSP woofers and an Esotar 3 soft dome tweeter reach 122 dB at 2 meters with a stereo pair, and each driver handles 1000 W transients. It runs from an external power amplifier, with 250 to 500 W per channel recommended.\u003c\/p\u003e\n\n\u003ch3\u003eMade for Long Sessions at Volume\u003c\/h3\u003e\n\u003cp\u003eDynaudio built the M1 MkII out of a long research project into what engineers need when they monitor loud for hours. The Esotar 3 tweeter and the magnesium silicate polymer (MSP) woofers keep the sound field accurate and cut listening fatigue over a full day, with distortion held to 1% at 90 dB. A self-resetting fuse in the passive crossover protects the tweeter against long-term overload.\u003c\/p\u003e\n\n\u003ch3\u003eSetup\u003c\/h3\u003e\n\u003cp\u003eThe M1 MkII is meant to sit on stands just in front of the console or workstation. It can also go on a sturdy meter bridge or be flush-mounted in a wall, which raises its low-frequency output. Dynaudio recommends a listening distance of 1 to 3 meters. Gold screw-down 4 mm binding posts take the speaker cable, no cabling is supplied, and Dynaudio pairs the speaker with its DA20, DA40 and DCA800 amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo 18 cm MSP woofers and an Esotar 3 soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003e2-way passive design with a 1650 Hz crossover\u003c\/li\u003e\n  \u003cli\u003eEach driver handles 1000 W transients\u003c\/li\u003e\n  \u003cli\u003e122 dB maximum SPL at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003eStand, meter bridge or flush mounting\u003c\/li\u003e\n  \u003cli\u003eSelf-resetting tweeter protection fuse\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way passive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 50 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 122 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 1650 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 250 to 500 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA20, DA40, DCA800\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3 soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 18 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 256 x 476 x 393 mm (10.1 x 18.7 x 15.5 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14 kg (30.9 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380110655737,"sku":"M1MKII","price":6199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m1mkii-1.jpg?v=1792176198"},{"product_id":"dynaudio-m2mkii","title":"Dynaudio M2 MkII Passive 3-Way Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio Acoustics M2 MkII is a compact three-way monitor for near-field and mid-field work in music and post-production studios. Two 24 cm MSP woofers, a 75 mm soft dome midrange and an Esotar 3 tweeter cover 40 Hz to 20 kHz and reach 125 dB at 2 meters with a stereo pair. It is a passive speaker that runs from external amplifiers: two channels per speaker, at 250 to 500 W each.\u003c\/p\u003e\n\n\u003ch3\u003eHybrid Crossover\u003c\/h3\u003e\n\u003cp\u003eThe M2 MkII is driven as a two-way active system, with a custom hand-built passive network inside the cabinet. The amplifier or processor splits each channel into a feed for the woofers and a feed for the upper drivers, and the internal network divides that second feed between the midrange and the tweeter. Dynaudio's DA40 DSP amplifier, the DA20 with filters and the DCA800 with filters all handle the active split, and an external crossover such as the XTA DP448 also works.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe M2 MkII can stand on stands or be flush-mounted in a wall, which raises its low-frequency output. Dynaudio puts the best listening distance at 1.5 to 4 meters. The speaker connects through gold screw-down 4 mm binding posts, and no cabling is supplied, since every installation is built to the room. Dynaudio recommends that a qualified engineer with measurement gear carries out the final setup and alignment.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEsotar 3 soft dome tweeter, 75 mm soft dome midrange and two 24 cm MSP woofers\u003c\/li\u003e\n  \u003cli\u003e3-way hybrid design: active split for the woofers, passive network for midrange and tweeter\u003c\/li\u003e\n  \u003cli\u003e125 dB maximum SPL at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e40 Hz to 20 kHz frequency response\u003c\/li\u003e\n  \u003cli\u003eStand or flush mounting\u003c\/li\u003e\n  \u003cli\u003eSelf-resetting tweeter protection fuse\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way hybrid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 40 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 125 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 700 Hz and 3700 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms LF, 4 ohms MF\/HF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Two channels per speaker, 250 to 500 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA20 (with filters), DA40, DCA800 (with filters)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3 soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 75 mm soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 24 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 350 x 680 x 500 mm (13.8 x 26.8 x 19.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 35 kg (77.2 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380117668089,"sku":"M2MKII","price":11599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m2mkii-1.jpg?v=1792176200"},{"product_id":"dynaudio-m3f","title":"Dynaudio M3F Passive 3-Way Main Monitor (Black)","description":"\u003cp\u003eThe Dynaudio Acoustics M3F is a three-way main monitor for medium-size film and television post-production studios, designed to stand behind the screen. Its tall, narrow cabinet keeps the footprint small and leaves more room in the theater. With Dynaudio subwoofers and surrounds, the M3F forms an immersive system for Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 and for full theatrical Atmos. It covers 35 Hz to 20 kHz and reaches 120 dB at 2 meters.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Crossover\u003c\/h3\u003e\n\u003cp\u003eTwo 300 mm MSP (magnesium silicate polymer) woofers with 100 mm ferrofluid-cooled voice coils handle the bass. Two 170 mm MSP midrange drivers with 75 mm voice coils cover the middle, and a D260H 28 mm soft dome in a short waveguide handles the top. A high-power passive crossover links the midrange and tweeter, and the system is driven as an active two-way, from Dynaudio's DA-series amplifiers with onboard DSP or from DCA-series amplifiers with analog filter cards.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eBuilt for placement behind the screen\u003c\/li\u003e\n  \u003cli\u003eSmall footprint for medium-size dubbing stages\u003c\/li\u003e\n  \u003cli\u003eTwo 300 mm MSP woofers with 100 mm ferrofluid-cooled voice coils\u003c\/li\u003e\n  \u003cli\u003eTwo 170 mm MSP midrange drivers and a D260H soft dome tweeter in a short waveguide\u003c\/li\u003e\n  \u003cli\u003e3-way hybrid design: active split for the woofers, passive network for midrange and tweeter\u003c\/li\u003e\n  \u003cli\u003eSuited to Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 and full theatrical Atmos systems\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Post-production and music\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way hybrid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 120 dB at 2 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 250 Hz and 2500 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Two channels per speaker, 500 to 1000 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA40 DSP, DCA800 (with filters)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm soft dome in short waveguide (D260H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 2 x 17 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 30 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 1300 x 520 x 400 mm (51.2 x 20.5 x 15.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 62 kg (136.7 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380118552825,"sku":"M3F","price":19799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m3f-1.jpg?v=1792176205"},{"product_id":"dynaudio-m3fx","title":"Dynaudio M3FX Passive 3-Way High-Power Main Monitor (Black)","description":"\u003cp\u003eThe Dynaudio Acoustics M3FX is a high-power three-way main monitor for large film and TV post-production studios, where the console sits up to 8 meters from the screen. Four 300 mm MSP woofers, two 170 mm midrange drivers and a D260H soft dome tweeter cover 35 Hz to 20 kHz and reach 125 dB at 2 meters with a stereo pair. With Dynaudio subwoofers and surround speakers, it forms an immersive system for Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 and for full theatrical Atmos.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Crossover\u003c\/h3\u003e\n\u003cp\u003eThe bass section uses four low-distortion MSP (magnesium silicate polymer) woofers with 100 mm ferrofluid-cooled voice coils. The two midrange drivers have 75 mm voice coils and neodymium magnets, and the 28 mm tweeter sits in a short waveguide. A high-power passive crossover inside the cabinet links the midrange and tweeter, and the system is driven as an active two-way, from Dynaudio's DA-series amplifiers with onboard DSP or DCA-series amplifiers with built-in filters.\u003c\/p\u003e\n\n\u003ch3\u003eVersions\u003c\/h3\u003e\n\u003cp\u003eDynaudio builds the M3FX in a left\/right version and a wider center version with the same drivers. Both weigh 110 kg. The left\/right cabinet measures 1300 x 720 x 600 mm, and the center cabinet measures 1300 x 900 x 515 mm.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor large dubbing theaters with the console up to 8 m from the screen\u003c\/li\u003e\n  \u003cli\u003eFour 300 mm MSP woofers with 100 mm ferrofluid-cooled voice coils\u003c\/li\u003e\n  \u003cli\u003eTwo 170 mm midrange drivers with neodymium magnets\u003c\/li\u003e\n  \u003cli\u003eD260H 28 mm soft dome tweeter in a short waveguide\u003c\/li\u003e\n  \u003cli\u003e3-way hybrid design: active split for the woofers, passive network for midrange and tweeter\u003c\/li\u003e\n  \u003cli\u003eSuited to Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 and full theatrical Atmos systems\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Post-production and music\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way hybrid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 125 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 250 Hz and 3000 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA40 or DA80 DSP, DCA800 or DCA1400 (with filters)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm soft dome in short waveguide (D260H)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 2 x 17 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 4 x 30 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e Left\/right 1300 x 720 x 600 mm (51.2 x 28.3 x 23.6 in); center 1300 x 900 x 515 mm (51.2 x 35.4 x 20.3 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 110 kg (242.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380119404793,"sku":"M3FX","price":27999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m3fx-1.jpg?v=1792176208"},{"product_id":"dynaudio-m3mkii","title":"Dynaudio M3 MkII Passive 3-Way Main Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio Acoustics M3 MkII is a three-way main monitor for small to medium music rooms and film dubbing theaters, built to run continuously at high power. Two 30 cm MSP woofers, two 15 cm MSP midrange drivers and a high-power Esotar 3 dome tweeter cover 35 Hz to 20 kHz and reach 123 dB at 2 meters with a stereo pair. It is a passive speaker, and Dynaudio recommends two amplifier channels of 500 to 1000 W per speaker.\u003c\/p\u003e\n\n\u003ch3\u003eDesign\u003c\/h3\u003e\n\u003cp\u003eDynaudio designed the M3 MkII to eliminate cone break-up, thermal compression and phase misalignment at high levels, so the response stays full and flat as the volume goes up. The Esotar 3 tweeter also appears in Dynaudio's high-end home and theater speakers. The system is driven two-way active, with a passive network inside the cabinet dividing the midrange and tweeter. Dynaudio's DA40 DSP amplifier or a pair of DCA800 amplifiers with filters handle the active split.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eThe M3 MkII can stand on stands or be flush-mounted in a wall, which raises its low-frequency output. Dynaudio puts the best listening distance at 1.5 to 5 meters, measured from the center of the tweeter, and the woofers can sit on the inside or the outside of the pair to suit the room. The speaker connects through gold screw-down 4 mm binding posts, and no cabling is supplied, since every installation is built to the room. Dynaudio recommends that a qualified engineer with measurement gear carries out the final setup and alignment.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-power Esotar 3 dome tweeter, two 15 cm MSP midrange drivers and two 30 cm MSP woofers\u003c\/li\u003e\n  \u003cli\u003eDesigned for continuous high-power operation\u003c\/li\u003e\n  \u003cli\u003e3-way hybrid design: active split for the woofers, passive network for midrange and tweeter\u003c\/li\u003e\n  \u003cli\u003e123 dB maximum SPL at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e35 Hz to 20 kHz frequency response\u003c\/li\u003e\n  \u003cli\u003eStand or flush mounting\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way hybrid\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 123 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 400 Hz and 3900 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms LF, 4 ohms MF\/HF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Two channels per speaker, 500 to 1000 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA40 DSP, DCA800 (with filters)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3 soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 2 x 15 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 30 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 775 x 555 x 505 mm (30.5 x 21.9 x 19.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 65 kg (143.3 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380120387833,"sku":"M3MKII","price":24799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m3mkii-1.jpg?v=1792176203"},{"product_id":"dynaudio-m4-mkii","title":"Dynaudio M4 MkII 4-Way Main Monitor","description":"\u003cp\u003eThe Dynaudio Acoustics M4 MkII is a 4-way main monitor for large music recording and mixing rooms. Four 300 mm MSP woofers carry the bass, two 170 mm MSP drivers cover the low mids, and an Esotar soft dome and the Esotar 3 tweeter handle the upper mids and highs. A stereo pair reaches 130 dB at 2 meters with distortion held to 1% at 90 dB.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Crossover\u003c\/h3\u003e\n\u003cp\u003eThe woofers use 100 mm ferrofluid-cooled voice coils and run as two pairs, each pair on its own amplifier channel. The low-mid drivers have 75 mm voice coils and neodymium magnets, and both Esotar units use double-magnet motors. External crossovers split the signal at 250 Hz and 2 kHz, and a high-power passive network in the cabinet joins the upper mid and tweeter at 5 kHz.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification and Installation\u003c\/h3\u003e\n\u003cp\u003eThe M4 MkII has no built-in amplifiers. Each speaker takes four channels of 500 to 1,000 W, and Dynaudio recommends its DA40\/80 DSP or DCA800\/1400 amplifiers. The cabinet is usually flush-mounted in a wall, which adds low-frequency output, and it can also stand free. Dynaudio gives 2 to 6 meters as the listening distance and recommends that a qualified engineer carry out the final alignment.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e4-way hybrid design for large control rooms\u003c\/li\u003e\n  \u003cli\u003eFour 300 mm MSP woofers with 100 mm ferrofluid-cooled voice coils\u003c\/li\u003e\n  \u003cli\u003eTwo 170 mm MSP low-mid drivers with neodymium magnets\u003c\/li\u003e\n  \u003cli\u003eEsotar soft-dome upper midrange and Esotar 3 tweeter with double-magnet motors\u003c\/li\u003e\n  \u003cli\u003e130 dB maximum SPL at 2 m from a stereo pair\u003c\/li\u003e\n  \u003cli\u003eFlush-mount or free-standing installation\u003c\/li\u003e\n  \u003cli\u003e4 mm binding posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 4-way hybrid, external amplification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music recording and mixing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 130 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 250 Hz, 2 kHz, 5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpper midrange:\u003c\/strong\u003e Esotar soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow midrange:\u003c\/strong\u003e 2 x 170 mm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 4 x 300 mm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e LF 2 x 4 ohms, LMF 4 ohms, MF\/HF 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Four channels per speaker, 500 to 1,000 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics DA40\/80 DSP, DCA800\/1400\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 900 x 850 x 680 mm (35.4 x 33.5 x 26.8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 145 kg (320 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380120781049,"sku":"M4+MKII","price":32999.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m4-mkii-1.jpg?v=1792175904"},{"product_id":"dynaudio-m4mkii-mini","title":"Dynaudio M4 MkII Mini 4-Way Main Monitor","description":"\u003cp\u003eThe Dynaudio Acoustics M4 MkII Mini is the compact version of the M4 MkII main monitor, built with two bass drivers in place of four for control rooms that cannot fit the full-size cabinet. Above the bass it uses the same drivers as the M4 MkII, with the same 250 Hz, 2 kHz and 5 kHz crossover points and the same 35 Hz to 20 kHz response.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers\u003c\/h3\u003e\n\u003cp\u003eTwo 300 mm MSP woofers with 100 mm ferrofluid-cooled voice coils cover the bass. Two 170 mm MSP drivers with 75 mm voice coils and neodymium magnets take the low mids. An Esotar fabric dome handles the upper mids with low distortion and fast transient response, and the Esotar 3 tweeter, designed for transients up to 1,000 W, covers the highs.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\n\u003cp\u003eThe Mini has no built-in amplifiers. Each speaker runs on three amplifier channels of 500 to 1,000 W, and Dynaudio recommends its DA40\/80 DSP or DCA800\/1400 amplifiers.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact 4-way hybrid version of the M4 MkII with two woofers\u003c\/li\u003e\n  \u003cli\u003eTwo 300 mm MSP woofers with 100 mm ferrofluid-cooled voice coils\u003c\/li\u003e\n  \u003cli\u003eTwo 170 mm MSP low-mid drivers with neodymium magnets\u003c\/li\u003e\n  \u003cli\u003eEsotar soft-dome upper midrange and Esotar 3 tweeter\u003c\/li\u003e\n  \u003cli\u003e125 dB maximum SPL at 2 m from a stereo pair\u003c\/li\u003e\n  \u003cli\u003eThree amplifier channels per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 4-way hybrid, external amplification\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music recording and mixing\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 125 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 250 Hz, 2 kHz, 5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUpper midrange:\u003c\/strong\u003e Esotar soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow midrange:\u003c\/strong\u003e 2 x 170 mm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 300 mm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Three channels per speaker, 500 to 1,000 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics DA40\/80 DSP, DCA800\/1400\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 862 x 650 x 550 mm (33.9 x 25.6 x 21.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 65 kg (143 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380125139193,"sku":"M4MKII\/MINI","price":28899.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-m4mkii-mini-1.jpg?v=1792175907"},{"product_id":"dynaudio-c3mkii","title":"Dynaudio C3 MkII 3-Way Passive Studio Monitor","description":"\u003cp\u003eThe Dynaudio Acoustics C3 MkII is a three-way reference monitor for small and medium music studios and for film and television post-production. It uses the same driver components as Dynaudio's flagship M4 system in a smaller cabinet: a 30 cm MSP woofer, a 17 cm MSP midrange and the Esotar 3 soft dome tweeter. With a subwoofer and eight or ten surrounds, C3 MkII speakers form an immersive system for Dolby Atmos Home Entertainment layouts such as 7.1.4 and 9.1.4.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Crossover\u003c\/h3\u003e\n\u003cp\u003eThe 30 cm bass driver has a 100 mm ferrofluid-cooled voice coil. The 17 cm midrange uses a 75 mm ferrofluid-cooled voice coil and a neodymium magnet, and a high-power passive crossover joins it to the Esotar 3 tweeter. The crossover points sit at 200 Hz and 3 kHz.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\n\u003cp\u003eThe C3 MkII runs as an active two-way system from outboard amplifiers, with two amplifier channels per speaker at 250 to 500 W per channel. Dynaudio's recommended pairing is two DCA stereo amplifiers fitted with crossover cards, or a DA40 DSP amplifier, which drives a stereo pair.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThree-way design with Esotar 3 soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003e30 cm MSP woofer with 100 mm ferrofluid-cooled voice coil\u003c\/li\u003e\n  \u003cli\u003e17 cm MSP midrange with 75 mm ferrofluid-cooled voice coil and neodymium magnet\u003c\/li\u003e\n  \u003cli\u003eHigh-power passive crossover between midrange and tweeter\u003c\/li\u003e\n  \u003cli\u003eTwo amplifier channels per speaker\u003c\/li\u003e\n  \u003cli\u003eSuited to stereo and immersive monitoring, including Dolby Atmos 7.1.4 and 9.1.4\u003c\/li\u003e\n  \u003cli\u003eBlack textured paint finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way hybrid, passive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 35 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 120 dB at 2 m (stereo)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequencies:\u003c\/strong\u003e 200 Hz and 3000 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e Two channels per speaker, 250 to 500 W per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifiers:\u003c\/strong\u003e Dynaudio Acoustics DA40 DSP, DCA800 (with filters)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotar 3 soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 17 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 30 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet dimensions (H x W x D):\u003c\/strong\u003e 875 x 440 x 395 mm (34.4 x 17.3 x 15.6 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 40 kg (88.2 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380125663481,"sku":"C3MKII","price":14899.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-c3mkii-1.jpg?v=1792176515"},{"product_id":"dynaudio-mf15","title":"Dynaudio MF15 Compact Surround Speaker (Vertical or Horizontal)","description":"\u003cp\u003eThe Dynaudio Acoustics MF15 is a passive 2-way surround speaker for immersive music and post-production rooms, suited to Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 systems. Its shallow cabinet fits smaller control rooms with low ceilings. A 24 cm MSP woofer and a 28 mm soft-dome tweeter cover 60 Hz to 20 kHz and reach 114 dB at 1 meter.\u003c\/p\u003e\n\n\u003ch3\u003eIn an Immersive System\u003c\/h3\u003e\n\u003cp\u003eThe MF15 works with any M-series main monitor, and its drivers match those in Dynaudio's screen speakers, so sound moves evenly around the room in Atmos mixes. Dynaudio limits its bass by design. That suits small rooms, and in larger rooms Dynaudio recommends bass management with an MS-series subwoofer. The speaker has no built-in amplifier and takes 100 to 500 W, with Dynaudio's 4-channel DA20 as the recommended amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eFormats and Mounting\u003c\/h3\u003e\n\u003cp\u003eDynaudio builds each MF15 to order in one of two formats, vertical (452 x 320 x 204 mm) or horizontal center (320 x 452 x 178 mm). Tell us which format you need when you order. Both formats use the same drivers and have the same acoustic specifications. Four M8 threaded inserts on the back, set in a 75 mm square, take a range of wall and ceiling brackets, and Dynaudio gives 1 to 5 meters as the listening distance.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePassive 2-way surround speaker for immersive audio\u003c\/li\u003e\n  \u003cli\u003eSuited to Dolby Atmos HE 7.1.4 and 9.1.4 systems\u003c\/li\u003e\n  \u003cli\u003eShallow cabinet for smaller rooms with low ceilings\u003c\/li\u003e\n  \u003cli\u003e24 cm MSP woofer and 28 mm soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eFour M8 threaded inserts for bracket mounting\u003c\/li\u003e\n  \u003cli\u003eBuilt to order in vertical or horizontal center format\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way passive surround\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 60 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 114 dB at 1 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 2 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 90 dB (2.83 V, 1 m)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 24 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 100 to 500 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics DA20 4-channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 4 x M8 threaded inserts on the back, 75 x 75 mm pattern\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFormats:\u003c\/strong\u003e Vertical or horizontal center, built to order\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions, vertical (H x W x D):\u003c\/strong\u003e 452 x 320 x 204 mm (17.8 x 12.6 x 8.0 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions, horizontal center (H x W x D):\u003c\/strong\u003e 320 x 452 x 178 mm (12.6 x 17.8 x 7.0 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg (22 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380125794553,"sku":"MF15","price":4599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-mf15-1.jpg?v=1792175922"},{"product_id":"dynaudio-mf30","title":"Dynaudio MF30 Compact Surround Speaker","description":"\u003cp\u003eThe Dynaudio Acoustics MF30 is the dual-woofer version of the MF15, a passive 2-way surround speaker with more output for larger rooms and larger Dolby Atmos systems. Two 24 cm MSP woofers and a 28 mm soft-dome tweeter cover 60 Hz to 20 kHz and reach 122 dB at 1 meter, with 95 dB sensitivity.\u003c\/p\u003e\n\n\u003ch3\u003eIn an Immersive System\u003c\/h3\u003e\n\u003cp\u003eThe MF30 works with any M-series main monitor, and MS-series subwoofers take care of bass management. Its drivers match those in Dynaudio's screen speakers, so sound moves evenly around the room in Atmos mixes.\u003c\/p\u003e\n\n\u003ch3\u003eInstallation and Amplification\u003c\/h3\u003e\n\u003cp\u003eFour M8 threaded inserts on the back take a range of brackets. The MF30 has no built-in amplifier and takes 100 to 500 W, and Dynaudio recommends its four-channel Class D DA20 or DA40.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePassive 2-way surround speaker, the dual-woofer version of the MF15\u003c\/li\u003e\n  \u003cli\u003eTwo 24 cm MSP woofers and a 28 mm soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003e122 dB maximum SPL at 1 m\u003c\/li\u003e\n  \u003cli\u003eFor music and post-production, including larger Dolby Atmos systems\u003c\/li\u003e\n  \u003cli\u003eFour M8 threaded inserts for bracket mounting\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way passive surround\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Music and post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 60 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 122 dB at 1 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e 1% at 90 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 95 dB (2.83 V, 1 m)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 24 cm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 100 to 500 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics four-channel Class D DA20\/40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 4 x M8 threaded inserts on the back\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 440 x 515 x 255 mm (17.3 x 20.3 x 10.0 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15 kg (33 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380127072505,"sku":"MF30","price":5799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-mf30-1.jpg?v=1792175924"},{"product_id":"dynaudio-da-15sub","title":"Dynaudio MS15 Studio Subwoofer","description":"\u003cp\u003eThe Dynaudio Acoustics MS15 is a passive subwoofer for small and medium film and television post-production studios, including immersive rooms set up for Dolby Atmos Home Entertainment 7.1.4 and 9.1.4. A single 15-inch (380 mm) fiber-loaded cone in a ported cabinet reaches down to 30 Hz and produces up to 128 dB at 1 meter.\u003c\/p\u003e\n\n\u003ch3\u003ePlacement\u003c\/h3\u003e\n\u003cp\u003eThe MS15 usually sits on the floor between the left and right speakers, and building it into a baffle wall adds low-frequency output. The enclosure can also be configured for other installs, such as ceiling mounting for low-frequency support in an Atmos array or a low-profile build for tight spaces. Besides full M-series systems, it can extend the bass of the M1 and M2 monitors.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\n\u003cp\u003eThe MS15 has no built-in amplifier and takes 500 to 3,000 W. Dynaudio recommends its DCA800 or DA40.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePassive subwoofer with a single 15-inch (380 mm) fiber-loaded cone\u003c\/li\u003e\n  \u003cli\u003ePorted cabinet with extension to 30 Hz\u003c\/li\u003e\n  \u003cli\u003e128 dB maximum SPL at 1 m\u003c\/li\u003e\n  \u003cli\u003eSuited to Dolby Atmos HE 7.1.4 and 9.1.4 monitoring\u003c\/li\u003e\n  \u003cli\u003eFloor, baffle-wall or ceiling installation\u003c\/li\u003e\n  \u003cli\u003e4 mm binding posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive subwoofer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Film and television post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 30 Hz to above 500 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 128 dB at 1 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 96 dB (2.83 V, 1 m)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 8 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e 380 mm (15-inch) fiber-loaded cone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 500 to 3,000 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics DCA800 or DA40\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 774 x 500 x 550 mm (30.5 x 19.7 x 21.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 50 kg (110 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380128252153,"sku":"DA-15SUB","price":10549.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-ms15-1.jpg?v=1792175927"},{"product_id":"dynaudio-da-18sub","title":"Dynaudio MS18 Studio Subwoofer","description":"\u003cp\u003eThe Dynaudio Acoustics MS18 is a passive subwoofer for film and television post-production studios, built for immersive monitoring from Dolby Atmos Home Entertainment 7.1.4 and 9.1.4 up to full theatrical Atmos multichannel. A single 18-inch (460 mm) fiber-loaded cone in a ported cabinet reaches down to 25 Hz and produces up to 130 dB at 1 meter.\u003c\/p\u003e\n\n\u003ch3\u003ePlacement\u003c\/h3\u003e\n\u003cp\u003eThe MS18 usually sits on the floor between the left and right speakers, and building it into a baffle wall adds low-frequency output. The enclosure can also be configured for other installs, such as ceiling mounting for low-frequency support in an Atmos array or a low-profile build for tight spaces.\u003c\/p\u003e\n\n\u003ch3\u003eAmplification\u003c\/h3\u003e\n\u003cp\u003eThe MS18 has no built-in amplifier and takes 500 to 3,000 W. Dynaudio recommends its DA80 or DCA1400.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePassive subwoofer with a single 18-inch (460 mm) fiber-loaded cone\u003c\/li\u003e\n  \u003cli\u003ePorted cabinet with extension to 25 Hz\u003c\/li\u003e\n  \u003cli\u003e130 dB maximum SPL at 1 m\u003c\/li\u003e\n  \u003cli\u003eFor Dolby Atmos HE 7.1.4 and 9.1.4 up to full theatrical Atmos\u003c\/li\u003e\n  \u003cli\u003eFloor, baffle-wall or ceiling installation\u003c\/li\u003e\n  \u003cli\u003e4 mm binding posts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive subwoofer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Film and television post-production\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 25 Hz to above 500 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 130 dB at 1 m\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 97 dB (2.83 V, 1 m)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 8 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e 460 mm (18-inch) fiber-loaded cone\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended amplifier power:\u003c\/strong\u003e 500 to 3,000 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier recommendation:\u003c\/strong\u003e Dynaudio Acoustics DA80 or DCA1400\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e 4 mm binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 1000 x 700 x 550 mm (39.4 x 27.6 x 21.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 75 kg (165 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black textured paint\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380128645369,"sku":"DA-18SUB","price":12899.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-ms18-1.jpg?v=1792175929"},{"product_id":"dynaudio-core-5","title":"Dynaudio Core 5 2-Way Active Studio Monitor (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core 5 is the smallest speaker in Dynaudio's Core range of professional reference monitors, a 2-way active nearfield design for small control rooms, edit suites, OB trucks and immersive rooms that need many speakers in one space. Each cabinet carries a 5-inch MSP woofer and a 28 mm Cerotar Pro soft-dome tweeter with a Hexis inner dome, each driven by its own 280 W Pascal Class D amplifier. It reaches 110 dB in half space and takes both analog XLR and AES3 digital signals.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 5 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\n\u003ch3\u003eLevels and Placement\u003c\/h3\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (79, 85, 91 or 96 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 5 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\u003cp\u003eIndentations in the cabinet locate the Core 5 on other Core speakers and subwoofers. It can stand on a desk or stand, hang vertically or horizontally from Dynaudio's Core Mounting Bracket (Type 2), or run inverted with the woofer above the tweeter.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-way active design with a DSP crossover at 3,800 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Cerotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e5-inch MSP (Magnesium Silicate Polymer) woofer\u003c\/li\u003e\n  \u003cli\u003eTwo Pascal Class D amplifiers, 280 W each\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003ePower-saving standby after 20 minutes without signal\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Cerotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 5-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 280 W woofer, 280 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 3,800 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 46 Hz to 26 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 42 Hz to 29 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 104 dB at 1 m anechoic, 110 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz, 0.48 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 190 x 353 x 265 mm (7.5 x 14 x 10.4 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8.6 kg (19 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380130152697,"sku":"CORE-5","price":2299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-5-1.jpg?v=1792176285"},{"product_id":"dynaudio-core-7","title":"Dynaudio Core 7 2-Way Active Studio Monitor (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core 7 is a 2-way active reference monitor for recording, mixing and mastering rooms, broadcast trucks, dub stages and immersive mix rooms. A 7-inch MSP mid\/woofer and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome each have their own Pascal Class D amplifier, 500 W and 150 W. The Core 7 reaches 118 dB in half space and covers 40 Hz to 27 kHz within 3 dB, and a 32 mm front baffle keeps the cabinet stiff and inert.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 7 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\n\u003ch3\u003eLevels and Placement\u003c\/h3\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 101 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 7 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\u003cp\u003eAnalog signals are converted at 24 bits and processed at 192 kHz in 64-bit DSP. The cabinet has indentations on all four sides, so the Core 7 can stand upright, lie on its side or run inverted with the woofer on top. Dynaudio's Core Mounting Bracket (Type 1) holds it in surround and immersive layouts.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2-way active design with a DSP crossover at 2,300 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e7-inch MSP (Magnesium Silicate Polymer) mid\/woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification, 500 W woofer and 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003e32 mm front baffle and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMid\/woofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 2,300 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 40 Hz to 27 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 36 Hz to 29 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB at 1 m anechoic, 118 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 220 x 390 x 355 mm (8 5\/8 x 15 3\/8 x 14 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 14.6 kg (32.1 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380130775289,"sku":"CORE-7","price":2649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-7-1.jpg?v=1792176288"},{"product_id":"dynaudio-core-59","title":"Dynaudio Core 59 3-Way Active Studio Monitor (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core 59 is the flagship of Dynaudio's Core range, a 3-way active reference monitor for nearfield, midfield or main monitoring and for soffit mounting. It suits music recording, mixing and mastering, theatrical re-mixing, and editorial and sound design work. A 9-inch long-excursion MSP woofer, a 5-inch MSP midrange and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome each have their own Pascal Class D amplifier, 500 W, 500 W and 150 W, and the speaker reaches 119 dB in half space.\u003c\/p\u003e\n\n\u003ch3\u003eOrbit Baffle\u003c\/h3\u003e\n\u003cp\u003eThe tweeter and midrange sit together in the Orbit baffle, a sealed assembly that rotates inside the cabinet. Turn it 90 degrees and the Core 59 can lie on its side with the drivers still time-aligned, so one model covers left, right and center positions in 5.1, 7.1, 9.1.2 and Dolby Atmos systems. For a center channel the woofer can sit above or below the baffle. The cabinet has a 32 mm thick baffle, indentations on all four sides and VESA mounting points, and it also fits Dynaudio's Core Mounting Bracket (Type 1).\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 59 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 105 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 59 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\u003cp\u003eEvery Dynaudio driver is calibrated at the factory and marked with its value. If a driver ever needs replacing, you enter that value in the Core Update Tool over USB and the speaker is recalibrated.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way active design with DSP crossovers at 385 Hz and 5,000 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e5-inch MSP midrange and 9-inch long-excursion MSP woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification: 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003eRotating Orbit baffle for vertical, horizontal and center use\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003eVESA mounting points and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way active main monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 5-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 9-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 385 Hz and 5,000 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 39 Hz to 27 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 36 Hz to 29 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 113 dB at 1 m anechoic, 119 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 280 x 545 x 365 mm (11 x 21 1\/2 x 14 3\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 24.6 kg (54.2 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380131660025,"sku":"CORE-59","price":4199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-59-1.jpg?v=1792176295"},{"product_id":"dynaudio-core-47","title":"Dynaudio Core 47 3-Way Active Studio Monitor (Dark Grey, Left)","description":"\u003cp\u003eThe Dynaudio Core 47 is a compact 3-way active reference monitor for music studios, TV dub stages, edit suites, broadcast trucks, ADR rooms and game audio suites, and it works as a surround speaker in multichannel and immersive rooms. A 7-inch MSP woofer, a 4-inch MSP midrange and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome run from three Pascal Class D amplifiers, 500 W, 500 W and 150 W. Crossover points at 475 Hz and 5,250 Hz put more of the vocal range in one driver, which helps with decisions on vocal balance and dialogue.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eDynaudio builds the Core 47 in two mirrored models, with the woofer on either side of the tweeter and midrange, and the manual calls for horizontal placement only. This listing is the left speaker, sold singly, with the woofer to the right of the tweeter and midrange as seen from the front. Add a Core 47 Right for a stereo pair. The pair can run tweeters-in or tweeters-out to suit the room and listening position.\u003c\/p\u003e\n\u003cp\u003eA 44 mm front bezel stiffens the cabinet. Indentations on all four sides take Dynaudio's isolation pads, and the Core Mounting Bracket (Type 1) holds the Core 47 in surround and immersive layouts.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 47 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 105 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 47 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way active design with DSP crossovers at 475 Hz and 5,250 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e4-inch MSP midrange and 7-inch MSP woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification: 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003e44 mm front bezel and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 475 Hz and 5,250 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 41 Hz to 24 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 35 Hz to 30 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 113 dB at 1 m anechoic, 118 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 390 x 240 x 355 mm (15 3\/8 x 9 7\/16 x 14 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.6 kg (34.4 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, left speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380132118777,"sku":"CORE-47\/L","price":3399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-47-1.jpg?v=1792176291"},{"product_id":"dynaudio-core-sub","title":"Dynaudio Core Sub Active Studio Subwoofer (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core Sub is the full-size subwoofer for the Core range of reference monitors. Four side-firing 9-inch MSP+ Hybrid Drive woofers sit in a sealed cabinet with 2 x 500 W of Pascal Class D amplification, and the response stays within 3 dB from 15 Hz to 160 Hz. It runs on the same DSP and electronics as the Core monitors, so it matches their tonality and setup, from extending a single speaker through 2.1 bass management to a theatrical LFE channel.\u003c\/p\u003e\n\n\u003ch3\u003eHybrid Drive Woofers\u003c\/h3\u003e\n\u003cp\u003eThe MSP+ Hybrid Drive is made mainly of aluminum for stiffness. A paper damping layer on the back and a Magnesium Silicate Polymer cap on the front stop the aluminum from ringing, which keeps the bass tight and controlled. It is an improved version of the driver in Dynaudio's 18S subwoofer.\u003c\/p\u003e\n\n\u003ch3\u003eSetup and Placement\u003c\/h3\u003e\n\u003cp\u003eThe Bandwidth switch engages an 80 Hz low-pass filter to match a Core monitor set to its 80 Hz high-pass, and Position switches compensate for soffit, wall and corner placement. An Attenuation switch handles systems with two or four subwoofers, and the Digital Channel switch picks left, right or left plus right from the AES3 stream. Up to three Core Subs stack, indentations on top locate a Core monitor, and VESA points allow wall mounting.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour side-firing 9-inch MSP+ Hybrid Drive woofers\u003c\/li\u003e\n  \u003cli\u003eSealed enclosure\u003c\/li\u003e\n  \u003cli\u003eTwo Pascal Class D amplifiers, 500 W each\u003c\/li\u003e\n  \u003cli\u003eCore DSP with 80 Hz low-pass, position and boundary filters\u003c\/li\u003e\n  \u003cli\u003eAttenuation switch for two- or four-subwoofer systems\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003eStacks up to three high, with top indentations for Core monitors\u003c\/li\u003e\n  \u003cli\u003eVESA mounting points\u003c\/li\u003e\n  \u003cli\u003eAuto on\/off standby\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each subwoofer calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active subwoofer, sealed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 4 x 9-inch MSP+ Hybrid Drive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 2 x 500 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 15 Hz to 160 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 14 Hz to 165 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 106 dB at 1 m anechoic, 112 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 120 V or 200 to 240 V, 50\/60 Hz, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 390 x 514 x 365 mm (15 3\/8 x 20 x 14 3\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 48 kg (105.8 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnits per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380132708601,"sku":"CORE-SUB","price":5399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-sub-1.jpg?v=1792176298"},{"product_id":"dynaudio-core-compsub","title":"Dynaudio Core Sub Compact Active Studio Subwoofer (Dark Grey)","description":"\u003cp\u003eThe Dynaudio Core Sub Compact is half the size of the Core Sub, made for studios and immersive rooms where floor and wall space is short. Two 9-inch MSP+ Hybrid Drive woofers in a sealed cabinet each have their own 280 W Pascal Class D amplifier, and the response stays within 3 dB from 16 Hz to 200 Hz. It uses the same amplifier module and DSP as the rest of the Core family, so it matches the Core monitors in any system from 2.1 to 9.1.6.\u003c\/p\u003e\n\n\u003ch3\u003eOpposed Drivers\u003c\/h3\u003e\n\u003cp\u003eThe two woofers work in an opposed layout, which keeps cabinet vibration down even at maximum level. Each Hybrid Drive has a stiff aluminum core with paper damping on the rear and a Magnesium Silicate Polymer cap on the front to stop ringing, driven by a ferrite magnet system.\u003c\/p\u003e\n\n\u003ch3\u003eSetup and Placement\u003c\/h3\u003e\n\u003cp\u003eThe Bandwidth switch engages an 80 Hz low-pass filter to match a Core monitor set to its 80 Hz high-pass, and the level switch offers 79, 85, 91 and 94 dB settings for calibrated rooms. The Core Sub Compact fits under or behind a desk, sits under a Core speaker using the indentations on top, or goes on a wall with a standard VESA bracket. Several can run in one room for more even bass.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo opposed 9-inch MSP+ Hybrid Drive woofers\u003c\/li\u003e\n  \u003cli\u003eSealed enclosure\u003c\/li\u003e\n  \u003cli\u003eTwo Pascal Class D amplifiers, 280 W each\u003c\/li\u003e\n  \u003cli\u003eCore DSP with 80 Hz low-pass, position and boundary filters\u003c\/li\u003e\n  \u003cli\u003eAttenuation switch for two- or four-subwoofer systems\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003eTop indentations locate a Core monitor\u003c\/li\u003e\n  \u003cli\u003eVESA wall mounting\u003c\/li\u003e\n  \u003cli\u003eAuto on\/off standby\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active subwoofer, sealed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 9-inch MSP+ Hybrid Drive\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 2 x 280 W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 16 Hz to 200 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 15 Hz to 230 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 100 dB at 1 m anechoic, 106 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz, 0.48 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 390 x 360 x 365 mm (15 3\/8 x 14 x 14 3\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 26.1 kg (57.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUnits per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380134052089,"sku":"CORE-COMPSUB","price":3599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-compsub-1.jpg?v=1792176301"},{"product_id":"dynaudio-lyd-5","title":"Dynaudio LYD 5 5\" Active Studio Monitor (White)","description":"\u003cp\u003eThe Dynaudio LYD 5 is a compact active nearfield monitor for small studios, home setups and desktop mixing. Its handmade 5-inch MSP woofer uses the same lightweight aluminum voice coil as Dynaudio's hi-fi speakers and works with a 1.1-inch soft-dome tweeter, two 50 W Class-D amplifiers and a 24-bit\/96 kHz DSP signal path. Dynaudio tuned it to stay precise at low listening levels, so detail comes through without pushing the volume. This listing is one speaker in White Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 5 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eConnections and Setup\u003c\/h3\u003e\n\u003cp\u003eBalanced XLR and unbalanced RCA inputs take a feed from an audio interface, mixer or monitor controller. A three-position sensitivity switch sets the maximum input level at 0, +6 or +12 dBu, and an Auto standby mode shuts the amplifiers down when no signal is present until audio returns at the input.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHandmade 5\" MSP woofer with aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amplified with 2 x 50 W Class-D amplification\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 2-way nearfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 5\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 50 W woofer, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 5.2 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 60 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 106 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 170 x 260 x 211 mm (6.7 x 10.2 x 8.3 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.7 kg (12.6 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380135854329,"sku":"LYD-5","price":629.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-5-01.jpg?v=1792175802"},{"product_id":"dynaudio-lyd-5b","title":"Dynaudio LYD 5 5\" Active Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio LYD 5 is a compact active nearfield monitor for small studios, home setups and desktop mixing. Its handmade 5-inch MSP woofer uses the same lightweight aluminum voice coil as Dynaudio's hi-fi speakers and works with a 1.1-inch soft-dome tweeter, two 50 W Class-D amplifiers and a 24-bit\/96 kHz DSP signal path. Dynaudio tuned it to stay precise at low listening levels, so detail comes through without pushing the volume. This listing is one speaker in Black Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 5 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eConnections and Setup\u003c\/h3\u003e\n\u003cp\u003eBalanced XLR and unbalanced RCA inputs take a feed from an audio interface, mixer or monitor controller. A three-position sensitivity switch sets the maximum input level at 0, +6 or +12 dBu, and an Auto standby mode shuts the amplifiers down when no signal is present until audio returns at the input.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHandmade 5\" MSP woofer with aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amplified with 2 x 50 W Class-D amplification\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 2-way nearfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 5\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 50 W woofer, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 5.2 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 60 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 106 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 170 x 260 x 211 mm (6.7 x 10.2 x 8.3 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 5.7 kg (12.6 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380136116473,"sku":"LYD-5B","price":629.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-5b-01.jpg?v=1792175806"},{"product_id":"dynaudio-lyd-7","title":"Dynaudio LYD 7 7\" Active Studio Monitor (White)","description":"\u003cp\u003eThe Dynaudio LYD 7 is an active nearfield monitor with a 7-inch woofer, for producers and engineers who want more bass extension from a compact reference speaker. Its MSP woofer pairs a low-mass aluminum voice coil with a vented ferrite magnet and works with a 1.1-inch soft-dome tweeter, two 50 W Class-D amplifiers and a 24-bit\/96 kHz DSP signal path. Response reaches down to 55 Hz, and a pair plays to 109 dB maximum SPL. This listing is one speaker in White Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 7 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eConnections and Setup\u003c\/h3\u003e\n\u003cp\u003eBalanced XLR and unbalanced RCA inputs take a feed from an audio interface, mixer or monitor controller. A three-position sensitivity switch sets the maximum input level at 0, +6 or +12 dBu, and an Auto standby mode shuts the amplifiers down when no signal is present until audio returns at the input.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHandmade 7\" MSP woofer with aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amplified with 2 x 50 W Class-D amplification\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 2-way nearfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 7\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 50 W woofer, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 4.3 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 55 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 109 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 186 x 320 x 296 mm (7.3 x 12.6 x 11.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 kg (17.6 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380136444153,"sku":"LYD-7","price":799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-7-01.jpg?v=1792175811"},{"product_id":"dynaudio-lyd-7b","title":"Dynaudio LYD 7 7\" Active Nearfield Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio LYD 7 is a bi-amped nearfield studio monitor with a 7-inch MSP woofer and a 1.1-inch soft dome tweeter, made in Denmark for producers and engineers who mix at the desk with the speakers 1 to 2 meters away. Class-D amplifiers deliver 50 W for the woofer and 50 W for the tweeter, and rear-panel DSP switches set the bass extension, the tonal balance and a filter for placement near a wall. This listing is for one speaker in Black Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning for Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the back adapt the LYD 7 to where it sits. Bass Extension moves the low cutoff 10 Hz lower or higher: the lowest setting gives the deepest bass for mixing at moderate levels, and the highest gives the most output. Sound Balance tilts the whole response by 1.5 dB at each end toward a brighter or darker sound, and the Position switch adds a correction filter for speakers placed within 50 cm of a wall. A three-position sensitivity switch matches the speaker to consumer or professional output levels.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Amplification\u003c\/h3\u003e\n\u003cp\u003eThe 7-inch woofer uses Dynaudio's MSP (magnesium silicate polymer) cone with a low-mass aluminum voice coil and a vented ferrite magnet. The soft dome tweeter takes over at 4.3 kHz, and each driver has its own Class-D amplifier. The cabinet is a rear-ported bass reflex design, and an auto-standby mode shuts the amplifier section down when no audio is present and wakes it when signal returns.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e7-inch MSP woofer and 1.1-inch soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amped design with Class-D amplification (50 W woofer, 50 W tweeter)\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance tilt filter: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch for free-standing placement or within 50 cm of a wall\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6, 0 or -6 dB\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eAuto-standby mode\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor with DSP crossover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplification:\u003c\/strong\u003e 50 W woofer, 50 W tweeter, Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 4.3 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 55 Hz to 21 kHz (±3 dB); 45 Hz to 21 kHz (-6 dB, Bass Extension at -10 Hz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 109 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e 100 mV for 85 dB at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Rear-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 186 x 320 x 296 mm (7.3 x 12.6 x 11.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8 kg (17.6 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380137197817,"sku":"LYD-7B","price":799.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-lyd-7b-1.jpg?v=1792175955"},{"product_id":"dynaudio-lyd-8","title":"Dynaudio LYD 8 8\" Active Nearfield Studio Monitor (White)","description":"\u003cp\u003eThe Dynaudio LYD 8 is the largest two-way model in the LYD range, a bi-amped nearfield monitor with an 8-inch MSP woofer and a 1.1-inch soft dome tweeter. Class-D amplifiers deliver 80 W for the woofer and 50 W for the tweeter, for up to 112 dB per pair at 1 meter, and the speaker still works on the desk at 1 to 2 meters from the listening position. Rear-panel DSP switches tune it to the room, and it is made in Denmark. This listing is for one speaker in White Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning for Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the back adapt the LYD 8 to where it sits. Bass Extension moves the low cutoff 10 Hz lower or higher: the lowest setting gives the deepest bass for mixing at moderate levels, and the highest gives the most output. Sound Balance tilts the whole response by 1.5 dB at each end toward a brighter or darker sound, and the Position switch adds a correction filter for speakers placed within 50 cm of a wall. A three-position sensitivity switch matches the speaker to consumer or professional output levels.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Amplification\u003c\/h3\u003e\n\u003cp\u003eThe 8-inch woofer has a cone made of MSP (magnesium silicate polymer), and Dynaudio builds both drivers by hand. The soft dome tweeter takes over at 3.9 kHz, and each driver has its own Class-D amplifier. The cabinet is a rear-ported bass reflex design, and an auto-standby mode shuts the amplifier section down when no audio is present and wakes it when signal returns.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e8-inch MSP woofer and 1.1-inch soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amped design with Class-D amplification (80 W woofer, 50 W tweeter)\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance tilt filter: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch for free-standing placement or within 50 cm of a wall\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6, 0 or -6 dB\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eAuto-standby mode\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor with DSP crossover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplification:\u003c\/strong\u003e 80 W woofer, 50 W tweeter, Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3.9 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 55 Hz to 21 kHz (±3 dB); 45 Hz to 21 kHz (-6 dB, Bass Extension at -10 Hz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e 100 mV for 85 dB at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Rear-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 234 x 369 x 328 mm (9.2 x 14.5 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.2 kg (22.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380138541305,"sku":"LYD-8","price":1099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-lyd-8-1.jpg?v=1792175959"},{"product_id":"dynaudio-lyd-8b","title":"Dynaudio LYD 8 8\" Active Nearfield Studio Monitor (Black)","description":"\u003cp\u003eThe Dynaudio LYD 8 is the largest two-way model in the LYD range, a bi-amped nearfield monitor with an 8-inch MSP woofer and a 1.1-inch soft dome tweeter. Class-D amplifiers deliver 80 W for the woofer and 50 W for the tweeter, for up to 112 dB per pair at 1 meter, and the speaker still works on the desk at 1 to 2 meters from the listening position. Rear-panel DSP switches tune it to the room, and it is made in Denmark. This listing is for one speaker in Black Satin.\u003c\/p\u003e\n\n\u003ch3\u003eTuning for Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the back adapt the LYD 8 to where it sits. Bass Extension moves the low cutoff 10 Hz lower or higher: the lowest setting gives the deepest bass for mixing at moderate levels, and the highest gives the most output. Sound Balance tilts the whole response by 1.5 dB at each end toward a brighter or darker sound, and the Position switch adds a correction filter for speakers placed within 50 cm of a wall. A three-position sensitivity switch matches the speaker to consumer or professional output levels.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers and Amplification\u003c\/h3\u003e\n\u003cp\u003eThe 8-inch woofer has a cone made of MSP (magnesium silicate polymer), and Dynaudio builds both drivers by hand. The soft dome tweeter takes over at 3.9 kHz, and each driver has its own Class-D amplifier. The cabinet is a rear-ported bass reflex design, and an auto-standby mode shuts the amplifier section down when no audio is present and wakes it when signal returns.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e8-inch MSP woofer and 1.1-inch soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eBi-amped design with Class-D amplification (80 W woofer, 50 W tweeter)\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance tilt filter: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch for free-standing placement or within 50 cm of a wall\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6, 0 or -6 dB\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eAuto-standby mode\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor with DSP crossover\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplification:\u003c\/strong\u003e 80 W woofer, 50 W tweeter, Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 3.9 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 55 Hz to 21 kHz (±3 dB); 45 Hz to 21 kHz (-6 dB, Bass Extension at -10 Hz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e 100 mV for 85 dB at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Rear-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 234 x 369 x 328 mm (9.2 x 14.5 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.2 kg (22.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380139196665,"sku":"LYD-8B","price":1099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-lyd-8b-1.jpg?v=1792175963"},{"product_id":"dynaudio-9s","title":"Dynaudio 9S Studio Subwoofer","description":"\u003cp\u003eThe Dynaudio 9S is a compact active subwoofer made to extend LYD, Classic BM and other Dynaudio studio monitors in stereo or surround setups. A 9-inch long-throw MSP woofer in a sealed cabinet with a 37 mm double front baffle reaches down to 22 Hz, driven by a 300 W Class D amplifier. The 9S replaces the BM 9S II at about the same size, and Dynaudio rates its performance closer to the larger BM 14S II.\u003c\/p\u003e\n\n\u003ch3\u003eCrossover and Connections\u003c\/h3\u003e\n\u003cp\u003eRun a full-range stereo signal into the SAT\/SUB inputs and the 9S plays the bass, while its SAT outputs pass the signal on to your monitors through a high-pass filter set flat, at 60 Hz or at 80 Hz. A low-pass control sets the sub's upper limit anywhere from 50 to 150 Hz. A separate LFE input takes the low-frequency channel of a surround mix, and the Slave output feeds a second 9S that follows the first unit's gain and phase.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e9-inch long-throw MSP woofer\u003c\/li\u003e\n  \u003cli\u003e300 W Class D amplifier\u003c\/li\u003e\n  \u003cli\u003eSealed black vinyl cabinet with 37 mm front baffle\u003c\/li\u003e\n  \u003cli\u003eVariable low-pass filter from 50 to 150 Hz\u003c\/li\u003e\n  \u003cli\u003eSAT outputs with high-pass filter: flat, 60 Hz or 80 Hz\u003c\/li\u003e\n  \u003cli\u003eLFE input and Slave output for multiple subwoofers\u003c\/li\u003e\n  \u003cli\u003ePhase switch, 0 or 180 degrees\u003c\/li\u003e\n  \u003cli\u003eAuto mode turns the sub on with signal and returns it to standby after 15 to 20 minutes of silence\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active subwoofer, sealed enclosure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 9\" (24 cm) long-throw MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e 300 W Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 22 Hz to 175 Hz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 106 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 x XLR LFE\/Slave, 2 x XLR stereo\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 x XLR Slave, 2 x XLR SAT\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-pass filter:\u003c\/strong\u003e 50 Hz to 150 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-pass filter (SAT outputs):\u003c\/strong\u003e Flat, 60 Hz or 80 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 0 or 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC power:\u003c\/strong\u003e 100-120 V \/ 200-240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 350 W maximum, under 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 266 x 276 x 320 mm (10.5 x 10.9 x 12.6 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.5 kg (23.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio 9S subwoofer\u003c\/li\u003e\n  \u003cli\u003eAC mains cable\u003c\/li\u003e\n  \u003cli\u003eOwner's manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380139524345,"sku":"9S","price":1449.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-9s-1.jpg?v=1792176496"},{"product_id":"dynaudio-18s","title":"Dynaudio 18S Studio Subwoofer","description":"\u003cp\u003eThe Dynaudio 18S is an active DSP subwoofer that extends Dynaudio studio monitors into the deep bass, turning a two-way stereo or surround setup into a three-way system for mixing and mastering. Two opposed 9-inch MSP+ Hybrid Drive long-throw woofers sit in a sealed cabinet, driven by a 500 W Class D amplifier, and reach down to 16 Hz. Built-in presets match the crossover to BM, LYD and other Dynaudio monitors, while distance alignment and parametric EQ fit the sub to your room.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to Dynaudio Monitors\u003c\/h3\u003e\n\u003cp\u003eDynaudio measured its studio monitors and stored a performance map for each one in the 18S. Choose your speaker model on the rear-panel display and the sub sets its low-pass filter to suit. Presets cover the BM6 and BM15 Classic, BM5 mkIII, LYD 5, LYD 7, LYD 8, LYD 48 and M5P, and Dynaudio adds new models through firmware updates over USB. With speakers from other makers, you set the low-pass frequency yourself.\u003c\/p\u003e\n\n\u003ch3\u003eSetup and Room Tuning\u003c\/h3\u003e\n\u003cp\u003eEnter the distance from the listening position to each monitor and to the sub, and the 18S applies time and phase delay so its bass arrives in step with the speakers. Three bands of parametric EQ pull down room modes, and a switchable 80 Hz high-pass filter on the outputs keeps the lowest bass out of the monitors. The monitors connect through the sub's balanced XLR or unbalanced RCA outputs, and a 12 V trigger input handles remote standby control.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTwo opposed 9-inch MSP+ Hybrid Drive long-throw woofers in a sealed cabinet\u003c\/li\u003e\n  \u003cli\u003e500 W Class D amplifier\u003c\/li\u003e\n  \u003cli\u003eDSP presets for Dynaudio BM, LYD and M5P monitors\u003c\/li\u003e\n  \u003cli\u003eDistance compensation with time and phase delay\u003c\/li\u003e\n  \u003cli\u003eThree-band parametric EQ\u003c\/li\u003e\n  \u003cli\u003eSwitchable 80 Hz Linkwitz-Riley high-pass filter on the outputs\u003c\/li\u003e\n  \u003cli\u003eRear-panel display and rotary controller for setup\u003c\/li\u003e\n  \u003cli\u003eMaster and slave operation for multiple subwoofers\u003c\/li\u003e\n  \u003cli\u003eAuto standby and 12 V trigger input\u003c\/li\u003e\n  \u003cli\u003eUSB service port for firmware updates\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active DSP subwoofer, sealed enclosure\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofers:\u003c\/strong\u003e 2 x 9\" MSP+ Hybrid Drive, opposed\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e 500 W Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 16 Hz to 230 Hz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 110 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x balanced XLR, 2 x unbalanced RCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 x balanced XLR, 2 x unbalanced RCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLow-pass filter:\u003c\/strong\u003e Preset or adjustable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHigh-pass filter (outputs):\u003c\/strong\u003e 80 Hz, switchable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 0 or 180 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrigger input:\u003c\/strong\u003e 5 to 12 V DC\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC power:\u003c\/strong\u003e 100-120 V \/ 200-240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 490 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 447 x 300 x 268 mm (17 5\/8 x 11 3\/4 x 10 1\/2 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22.1 kg (48.7 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio 18S subwoofer\u003c\/li\u003e\n  \u003cli\u003eMains power cable\u003c\/li\u003e\n  \u003cli\u003eDocument pack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380139786489,"sku":"18S","price":2199.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-18s-1.jpg?v=1792176493"},{"product_id":"dynaudio-bm5mkiii","title":"Dynaudio BM5 MkIII Studio Monitor","description":"\u003cp\u003eThe Dynaudio BM5 mkIII is a compact two-way active nearfield monitor for project studios, edit suites and desktop mixing. It follows the BM5A MKII with more output and a wider frequency and power response: a 6.5-inch MSP woofer and a 28 mm soft dome tweeter run from two 50 W Class D amplifiers through a DSP crossover, covering 42 Hz to 24 kHz. Balanced XLR and unbalanced RCA inputs connect it to an interface or a console.\u003c\/p\u003e\n\n\u003ch3\u003eDrivers\u003c\/h3\u003e\n\u003cp\u003eThe woofer's large-diameter voice coil surrounds the magnet for better linearity, and its aluminum former and wire keep the moving mass low for quick, accurate transients. Dynaudio molds the diaphragm and dust cap as one piece of Magnesium Silicate Polymer (MSP), which is light and very rigid. Dynaudio builds the drivers by hand.\u003c\/p\u003e\n\n\u003ch3\u003eRoom Controls\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel tune the speaker to its position. The LF shelf (+2, 0 or -2 dB) compensates for nearby walls and corners, the MF notch (-2 or -4 dB) offsets the low-mid bump from a console, and the HF switch trims the treble by 1 dB either way. A high-pass filter at 60 or 80 Hz prepares the BM5 mkIII for a subwoofer, and Dynaudio's 9S and 18S are its companion subs. The power switch can put the speaker to sleep after 20 minutes without signal.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e6.5-inch MSP woofer with 75 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e28 mm soft dome tweeter with rear chamber and magnetic fluid\u003c\/li\u003e\n  \u003cli\u003e2 x 50 W Class D amplifiers with DSP crossover\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eLF, MF and HF adjustment switches\u003c\/li\u003e\n  \u003cli\u003eHigh-pass filter at 60 or 80 Hz for use with a subwoofer\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: -10, 0 or +4\u003c\/li\u003e\n  \u003cli\u003eAuto sleep mode and optional wired remote volume control\u003c\/li\u003e\n  \u003cli\u003eThermal protection on both amplifiers and a woofer limiter\u003c\/li\u003e\n  \u003cli\u003eHandcrafted drivers, made in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 6.5\" MSP cone, 75 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm (1.1\") soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e 50 W (woofer) + 50 W (tweeter), Class D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP, 1900 Hz, 12 dB\/octave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 42 Hz to 24 kHz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 118 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBass loading:\u003c\/strong\u003e Rear-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAC power:\u003c\/strong\u003e 100-240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 0.3 W standby, 5.8 W idle, 94 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCabinet:\u003c\/strong\u003e 18 mm MDF\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 186 x 320 x 296 mm (7 3\/8 x 12 5\/8 x 11 5\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 7.7 kg (17 lb)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380140212473,"sku":"BM5MKIII","price":689.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-bm5mkiii-1.jpg?v=1792176508"},{"product_id":"dynaudio-bm6a","title":"Dynaudio BM6A Studio Monitor","description":"\u003cp\u003eThe Dynaudio BM6A is a two-way active nearfield monitor from the Classic BM range, made for mixing at close range on stands or a console meter bridge. A 170 mm MSP woofer and a 28 mm soft dome tweeter each have their own 100 W discrete MOSFET amplifier, fed by a fourth-order phase-aligned electronic crossover at 2.2 kHz. The response runs from 41 Hz to 21 kHz.\u003c\/p\u003e\n\n\u003ch3\u003eLow-Frequency Control\u003c\/h3\u003e\n\u003cp\u003eThe LF trim uses an equalizer that trades bass level for extension. Turn it down for a deeper, critically damped low end, or up for more level with less extension. A separate HF trim adjusts the range above 3 kHz by up to 5 dB, and an input switch matches +4 or -10 sources.\u003c\/p\u003e\n\n\u003ch3\u003eProtection\u003c\/h3\u003e\n\u003cp\u003eA protection circuit disconnects the drivers on thermal overload or DC at the outputs, and an optical limiter keeps sustained overload away from the tweeter while transients pass through. Front LEDs show power or fault status and clipping in the woofer amplifier. The matte cabinet has radiused front edges to reduce boundary effects.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e170 mm MSP woofer with aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e28 mm soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eTwo discrete MOSFET amplifiers, 100 W each\u003c\/li\u003e\n  \u003cli\u003eFourth-order phase-aligned electronic crossover at 2.2 kHz\u003c\/li\u003e\n  \u003cli\u003eLF trim that trades level for low-frequency extension\u003c\/li\u003e\n  \u003cli\u003eHF trim and input sensitivity switch\u003c\/li\u003e\n  \u003cli\u003ePower\/fault and clip LEDs on the front baffle\u003c\/li\u003e\n  \u003cli\u003eDC and thermal protection, optical limiter on the tweeter\u003c\/li\u003e\n  \u003cli\u003eHandcrafted drivers, made in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 170 mm MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 28 mm (1.1\") soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e 2 x 100 W, discrete MOSFET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 2200 Hz, 4th order, phase-aligned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 41 Hz to 21 kHz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 118 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBass loading:\u003c\/strong\u003e Rear-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e Balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 200 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 217 x 338 x 321 mm (8 1\/2 x 13 1\/4 x 12 5\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 11 kg (24.3 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio BM6A monitor\u003c\/li\u003e\n  \u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380140638457,"sku":"BM6A","price":1499.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-bm6a-1.jpg?v=1792176512"},{"product_id":"dynaudio-bm15a-right","title":"Dynaudio BM15A Active Studio Monitor (Right)","description":"\u003cp\u003eThe Dynaudio BM15A is a large two-way active monitor for nearfield and midfield work, for engineers who need more level and low end than a compact desk monitor gives. A 240 mm MSP woofer with a 100 mm aluminum voice coil and a version of Dynaudio's Esotec soft dome tweeter each have their own discrete MOSFET amplifier, 200 W and 100 W, fed by a phase-aligned electronic crossover. The front-ported cabinet reaches down to 40 Hz, and a pair plays up to 124 dB at 1 m.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Versions\u003c\/h3\u003e\n\u003cp\u003eThe BM15A comes as dedicated left and right speakers. This listing is the right speaker, sold singly; add a BM15A Left for a stereo pair.\u003c\/p\u003e\n\n\u003ch3\u003eControls and Protection\u003c\/h3\u003e\n\u003cp\u003eRear-panel switches set the input sensitivity for +4 or -10 sources, and HF and LF trims adjust each end of the response by up to 6 dB to suit the room. Two LEDs on the front baffle show power or fault status and clipping in the woofer amplifier. The protection circuit disconnects the drivers on thermal overload or DC at the outputs, and an optical limiter keeps sustained overload away from the tweeter while transients pass uncompressed.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e240 mm MSP woofer with 100 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003eEsotec soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eDual discrete MOSFET amplifiers, 200 W woofer and 100 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePhase-aligned electronic crossover\u003c\/li\u003e\n  \u003cli\u003eFront-loaded bass reflex port\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch and HF and LF trim controls\u003c\/li\u003e\n  \u003cli\u003ePower\/fault and clip LEDs on the front baffle\u003c\/li\u003e\n  \u003cli\u003eDC and thermal protection, optical limiter on the tweeter\u003c\/li\u003e\n  \u003cli\u003eMatte cabinet with radiused front edges to reduce boundary effects\u003c\/li\u003e\n  \u003cli\u003eHandcrafted drivers, made in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 240 mm MSP, 100 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotec soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e 200 W (woofer) + 100 W (tweeter), discrete MOSFET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 2-way, 1800 Hz, phase-aligned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 40 Hz to 21 kHz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 124 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBass loading:\u003c\/strong\u003e Front-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e Balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 300 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 290 x 454 x 388 mm (11 3\/8 x 17 7\/8 x 15 1\/4 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.6 kg (41 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio BM15A monitor (right)\u003c\/li\u003e\n  \u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380141097209,"sku":"BM15A\/RIGHT","price":2099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-bm15a-right-1.jpg?v=1792176504"},{"product_id":"dynaudio-bm15a-left","title":"Dynaudio BM15A Active Studio Monitor (Left)","description":"\u003cp\u003eThe Dynaudio BM15A is a large two-way active monitor for nearfield and midfield work, for engineers who need more level and low end than a compact desk monitor gives. A 240 mm MSP woofer with a 100 mm aluminum voice coil and a version of Dynaudio's Esotec soft dome tweeter each have their own discrete MOSFET amplifier, 200 W and 100 W, fed by a phase-aligned electronic crossover. The front-ported cabinet reaches down to 40 Hz, and a pair plays up to 124 dB at 1 m.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Versions\u003c\/h3\u003e\n\u003cp\u003eThe BM15A comes as dedicated left and right speakers. This listing is the left speaker, sold singly; add a BM15A Right for a stereo pair.\u003c\/p\u003e\n\n\u003ch3\u003eControls and Protection\u003c\/h3\u003e\n\u003cp\u003eRear-panel switches set the input sensitivity for +4 or -10 sources, and HF and LF trims adjust each end of the response by up to 6 dB to suit the room. Two LEDs on the front baffle show power or fault status and clipping in the woofer amplifier. The protection circuit disconnects the drivers on thermal overload or DC at the outputs, and an optical limiter keeps sustained overload away from the tweeter while transients pass uncompressed.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e240 mm MSP woofer with 100 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003eEsotec soft dome tweeter\u003c\/li\u003e\n  \u003cli\u003eDual discrete MOSFET amplifiers, 200 W woofer and 100 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePhase-aligned electronic crossover\u003c\/li\u003e\n  \u003cli\u003eFront-loaded bass reflex port\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch and HF and LF trim controls\u003c\/li\u003e\n  \u003cli\u003ePower\/fault and clip LEDs on the front baffle\u003c\/li\u003e\n  \u003cli\u003eDC and thermal protection, optical limiter on the tweeter\u003c\/li\u003e\n  \u003cli\u003eMatte cabinet with radiused front edges to reduce boundary effects\u003c\/li\u003e\n  \u003cli\u003eHandcrafted drivers, made in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 2-way active nearfield and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 240 mm MSP, 100 mm aluminum voice coil\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e Esotec soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e 200 W (woofer) + 100 W (tweeter), discrete MOSFET\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 2-way, 1800 Hz, phase-aligned\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 40 Hz to 21 kHz (+\/- 3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 124 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBass loading:\u003c\/strong\u003e Front-ported bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e Balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 300 W maximum\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 290 x 454 x 388 mm (11 3\/8 x 17 7\/8 x 15 1\/4 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18.6 kg (41 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eDynaudio BM15A monitor (left)\u003c\/li\u003e\n  \u003cli\u003ePower cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380141719801,"sku":"BM15A\/LEFT","price":2099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-bm15a-left-1.jpg?v=1792176500"},{"product_id":"dynaudio-da80-nd","title":"Dynaudio Delta 80 Four-Channel Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Delta 80 is a four-channel 2U power amplifier for studios and installations that handle processing elsewhere and need clean power for passive monitors. It delivers 2000 W per channel into 4 ohms, or 4000 W from a bridged pair, with THD below 0.18% at 1 kHz. Setup stays simple, with four balanced XLR inputs, a level control for each channel on the front panel and speakON outputs on the back. This is the 120 V model.\u003c\/p\u003e\n\n\u003ch3\u003eWorking with Delta DSP\u003c\/h3\u003e\n\u003cp\u003eThe Delta 80 has no onboard processing of its own. A Delta DSP amplifier can feed it processed signal from its four auxiliary outputs, so one DSP model runs crossovers and EQ for a stereo four-way system. With the optional Dante card fitted, a rear-panel switch moves all four channels from the XLR inputs to the network, with 24-bit\/96 kHz conversion.\u003c\/p\u003e\n\n\u003ch3\u003eProtection and Backup\u003c\/h3\u003e\n\u003cp\u003eEvery channel has a limiter, and the amplifier protects itself and the speakers against short circuits, DC and overheating. Depending on the fault, protection mutes all four channels or one channel pair. A short circuit on an output mutes only its own pair, 1+2 or 3+4, and the other two channels keep playing. Speaker backup inputs on the rear panel connect a redundant backup amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour channels, 2000 W per channel into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eChannel pairs 1+2 and 3+4 bridge for 4000 W into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eFour balanced XLR inputs with rear-panel link switches\u003c\/li\u003e\n  \u003cli\u003eRear-panel source switch for analog or Dante network audio (the Dante card is an option)\u003c\/li\u003e\n  \u003cli\u003eLevel control and signal meter with limit indicator on each channel\u003c\/li\u003e\n  \u003cli\u003espeakON outputs, with the channel 1 and 3 sockets also carrying channels 2 and 4 for bi-amping or bridging over one NL4 cable\u003c\/li\u003e\n  \u003cli\u003eSpeaker backup inputs for a redundant backup amplifier\u003c\/li\u003e\n  \u003cli\u003eStandby mode powers down the amplifier channels\u003c\/li\u003e\n  \u003cli\u003eLimiters, short-circuit, DC and thermal protection, and mains inrush control\u003c\/li\u003e\n  \u003cli\u003eVariable-speed fans with front-to-rear airflow and a cleanable front filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power per channel:\u003c\/strong\u003e 1000 W at 8 ohms, 2000 W at 4 ohms, 2200 W at 2.7 ohms, 2000 W at 2 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power, bridged:\u003c\/strong\u003e 4000 W at 8 ohms, 4000 W at 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum load:\u003c\/strong\u003e 2 ohms with reduced output (4 ohms bridged)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTHD (1 dB below maximum output):\u003c\/strong\u003e below 0.18% at 1 kHz, below 0.2% from 20 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz (+0\/-0.5 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity for maximum power:\u003c\/strong\u003e 8.2 dBu\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kilohms, active balanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput CMRR:\u003c\/strong\u003e above 60 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e above 400 (1 kHz, 8 ohms)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 x balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 x Neutrik speakON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 8.2 A nominal at 120 V into 4 ohms, below 5 W in standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 120 V, powerCON inlet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRack size:\u003c\/strong\u003e 2U, 19 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 88 x 482 x 428 mm (3.5 x 19.0 x 16.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.1 kg (22.3 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 11.6 kg (25.6 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380142932217,"sku":"DA80-ND","price":8899.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-da80-nd-1-front.jpg?v=1792175638"},{"product_id":"dynaudio-da80-dsp","title":"Dynaudio Delta 80 DSP Four-Channel Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Delta 80 DSP is a four-channel 2U power amplifier with built-in processing, made for studios and installations that run passive monitors. It delivers 2000 W per channel into 4 ohms, or 4000 W from a bridged pair, with THD below 0.18% at 1 kHz. Onboard EQ, crossovers, delay and limiting handle room tuning and multi-way splits without an outboard processor. Dynaudio names the Delta 80 DSP as an amplifier option for its Dynaudio Acoustics M3FX monitors. This is the 120 V model.\u003c\/p\u003e\n\n\u003ch3\u003eProcessing and Control\u003c\/h3\u003e\n\u003cp\u003eEach input has eight parametric EQ bands and three bands of dynamic EQ. Each output adds nine more parametric bands, Butterworth, Bessel or Linkwitz-Riley crossover filters up to 48 dB per octave, FIR filtering, up to 650 ms of delay, and program and peak limiters. Settings are edited on the front-panel display, from a computer over USB, Ethernet or RS485, or wirelessly from an iPad with the DeltaDirect app.\u003c\/p\u003e\n\n\u003ch3\u003eInputs, Outputs and Backup\u003c\/h3\u003e\n\u003cp\u003eFour balanced XLR inputs take analog signal, and inputs C and D switch to AES3 digital with a stereo pair on each, so an analog feed can stay patched as a fallback. Four auxiliary XLR outputs run their own processing channels and can drive a non-DSP Delta amplifier for a stereo four-way system. An optional Dante card adds four network inputs and four network outputs. Speaker backup inputs on the rear panel connect a redundant backup amplifier.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour channels, 2000 W per channel into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eChannel pairs 1+2 and 3+4 bridge for 4000 W into 4 ohms\u003c\/li\u003e\n  \u003cli\u003e8 parametric and 3 dynamic EQ bands per input\u003c\/li\u003e\n  \u003cli\u003e9 parametric EQ bands, crossover filters, FIR filtering, delay and limiters per output\u003c\/li\u003e\n  \u003cli\u003eFour independently processed auxiliary XLR outputs\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR inputs, with inputs C and D switchable to AES3\u003c\/li\u003e\n  \u003cli\u003eOptional Dante card with four network inputs and four network outputs\u003c\/li\u003e\n  \u003cli\u003eControl from the front panel, USB, Ethernet, RS485, AudioCore software and the DeltaDirect iPad app\u003c\/li\u003e\n  \u003cli\u003eGPIO port with two inputs and two outputs for memory recall, standby, mutes and level control\u003c\/li\u003e\n  \u003cli\u003eSettings stored as memories, with a password-protected front-panel lock\u003c\/li\u003e\n  \u003cli\u003eSpeaker backup inputs for a redundant backup amplifier\u003c\/li\u003e\n  \u003cli\u003eStandby mode powers down the amplifier channels and keeps the DSP running\u003c\/li\u003e\n  \u003cli\u003eLimiters, short-circuit, DC and thermal protection, and mains inrush control\u003c\/li\u003e\n  \u003cli\u003eVariable-speed fans with front-to-rear airflow and a cleanable front filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power per channel:\u003c\/strong\u003e 1000 W at 8 ohms, 2000 W at 4 ohms, 2200 W at 2.7 ohms, 2000 W at 2 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power, bridged:\u003c\/strong\u003e 4000 W at 8 ohms, 4000 W at 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum load:\u003c\/strong\u003e 2 ohms with reduced output (4 ohms bridged)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTHD (1 dB below maximum output):\u003c\/strong\u003e below 0.18% at 1 kHz, below 0.2% from 20 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz (+0\/-0.5 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity for maximum power:\u003c\/strong\u003e 8.3 dBu\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kilohms, active balanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput CMRR:\u003c\/strong\u003e above 60 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e above 400 (1 kHz, 8 ohms)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDSP sample rate:\u003c\/strong\u003e 96 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAES3 input sample rates:\u003c\/strong\u003e 32 kHz to 192 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuxiliary outputs:\u003c\/strong\u003e active balanced XLR, +18 dBu maximum, above 114 dB dynamic range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDelay:\u003c\/strong\u003e up to 650 ms per input and per output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover filters:\u003c\/strong\u003e Bessel and Butterworth 6 to 48 dB per octave, Linkwitz-Riley 12, 24 and 48 dB per octave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 8.2 A nominal at 120 V into 4 ohms, below 5 W in standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 120 V, powerCON inlet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRack size:\u003c\/strong\u003e 2U, 19 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 88 x 482 x 428 mm (3.5 x 19.0 x 16.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.3 kg (22.7 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 11.8 kg (26.0 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380143653113,"sku":"DA80-DSP","price":12599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-da80-dsp-1-front.jpg?v=1792175634"},{"product_id":"dynaudio-da40-nd","title":"Dynaudio Delta 40 Four-Channel Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Delta 40 is a four-channel 2U power amplifier for studios and installations that handle processing elsewhere and need clean power for passive monitors. It delivers 1000 W per channel into 4 ohms, or 2400 W from a bridged pair, with THD below 0.18% at 1 kHz. Setup stays simple, with four balanced XLR inputs, a level control for each channel on the front panel and speakON outputs on the back. This is the 120 V model.\u003c\/p\u003e\n\n\u003ch3\u003eWorking with Delta DSP\u003c\/h3\u003e\n\u003cp\u003eThe Delta 40 has no onboard processing of its own. A Delta DSP amplifier can feed it processed signal from its four auxiliary outputs, so one DSP model runs crossovers and EQ for a stereo four-way system. With the optional Dante card fitted, a rear-panel switch moves all four channels from the XLR inputs to the network, with 24-bit\/96 kHz conversion.\u003c\/p\u003e\n\n\u003ch3\u003eProtection and Backup\u003c\/h3\u003e\n\u003cp\u003eEvery channel has a limiter, and the amplifier protects itself and the speakers against short circuits, DC and overheating. Depending on the fault, protection mutes all four channels or one channel pair. A short circuit on an output mutes only its own pair, 1+2 or 3+4, and the other two channels keep playing. Speaker backup inputs connect a second amplifier that switches into circuit if the main one loses power or goes into protection.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour channels, 1000 W per channel into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eChannel pairs 1+2 and 3+4 bridge for 2400 W into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eFour balanced XLR inputs with rear-panel link switches\u003c\/li\u003e\n  \u003cli\u003eRear-panel source switch for analog or Dante network audio (the Dante card is an option)\u003c\/li\u003e\n  \u003cli\u003eLevel control and signal meter with limit indicator on each channel\u003c\/li\u003e\n  \u003cli\u003espeakON outputs, with the channel 1 and 3 sockets also carrying channels 2 and 4 for bi-amping or bridging over one NL4 cable\u003c\/li\u003e\n  \u003cli\u003eSpeaker backup inputs for a redundant backup amplifier\u003c\/li\u003e\n  \u003cli\u003eStandby mode powers down the amplifier channels\u003c\/li\u003e\n  \u003cli\u003eLimiters, short-circuit, DC and thermal protection, and mains inrush control\u003c\/li\u003e\n  \u003cli\u003eVariable-speed fans with front-to-rear airflow and a cleanable front filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power per channel:\u003c\/strong\u003e 500 W at 8 ohms, 1000 W at 4 ohms, 1400 W at 2.7 ohms, 1200 W at 2 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power, bridged:\u003c\/strong\u003e 2000 W at 8 ohms, 2400 W at 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum load:\u003c\/strong\u003e 2 ohms with reduced output (4 ohms bridged)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTHD (1 dB below maximum output):\u003c\/strong\u003e below 0.18% at 1 kHz, below 0.2% from 20 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz (+0\/-0.5 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity for maximum power:\u003c\/strong\u003e 6.2 dBu\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kilohms, active balanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput CMRR:\u003c\/strong\u003e above 60 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e above 400 (1 kHz, 8 ohms)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 x balanced XLR\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 x Neutrik speakON\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 6.0 A nominal at 120 V into 4 ohms, below 5 W in standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 120 V, powerCON inlet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRack size:\u003c\/strong\u003e 2U, 19 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 88 x 482 x 428 mm (3.5 x 19.0 x 16.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.0 kg (22.0 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 12.0 kg (26.5 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380144406777,"sku":"DA40-ND","price":7549.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-da40-nd-1-front.jpg?v=1792175631"},{"product_id":"dynaudio-da40-dsp","title":"Dynaudio Delta 40 DSP Four-Channel Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Delta 40 DSP is a four-channel 2U power amplifier with built-in processing, made for studios and installations that run passive monitors. It delivers 1000 W per channel into 4 ohms, or 2400 W from a bridged pair, with THD below 0.18% at 1 kHz. Onboard EQ, crossovers, delay and limiting handle room tuning and multi-way splits without an outboard processor. Dynaudio names the Delta 40 DSP as an amplifier option for its Dynaudio Acoustics C3 MkII and M3FX monitors. This is the 120 V model.\u003c\/p\u003e\n\n\u003ch3\u003eProcessing and Control\u003c\/h3\u003e\n\u003cp\u003eEach input has eight parametric EQ bands and three bands of dynamic EQ. Each output adds nine more parametric bands, Butterworth, Bessel or Linkwitz-Riley crossover filters up to 48 dB per octave, FIR filtering, up to 650 ms of delay, and program and peak limiters. Settings are edited on the front-panel display, from a computer over USB, Ethernet or RS485, or wirelessly from an iPad with the DeltaDirect app.\u003c\/p\u003e\n\n\u003ch3\u003eInputs, Outputs and Backup\u003c\/h3\u003e\n\u003cp\u003eFour balanced XLR inputs take analog signal, and inputs C and D switch to AES3 digital with a stereo pair on each, so an analog feed can stay patched as a fallback. Four auxiliary XLR outputs run their own processing channels and can drive a non-DSP Delta amplifier for a stereo four-way system. An optional Dante card adds four network inputs and four network outputs. Speaker backup inputs on the rear panel connect a second amplifier that switches into circuit if the main one loses power or goes into protection.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFour channels, 1000 W per channel into 4 ohms\u003c\/li\u003e\n  \u003cli\u003eChannel pairs 1+2 and 3+4 bridge for 2400 W into 4 ohms\u003c\/li\u003e\n  \u003cli\u003e8 parametric and 3 dynamic EQ bands per input\u003c\/li\u003e\n  \u003cli\u003e9 parametric EQ bands, crossover filters, FIR filtering, delay and limiters per output\u003c\/li\u003e\n  \u003cli\u003eFour independently processed auxiliary XLR outputs\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR inputs, with inputs C and D switchable to AES3\u003c\/li\u003e\n  \u003cli\u003eOptional Dante card with four network inputs and four network outputs\u003c\/li\u003e\n  \u003cli\u003eControl from the front panel, USB, Ethernet, RS485, AudioCore software and the DeltaDirect iPad app\u003c\/li\u003e\n  \u003cli\u003eGPIO port with two inputs and two outputs for memory recall, standby, mutes and level control\u003c\/li\u003e\n  \u003cli\u003eSettings stored as memories, with a password-protected front-panel lock\u003c\/li\u003e\n  \u003cli\u003eSpeaker backup inputs for a redundant backup amplifier\u003c\/li\u003e\n  \u003cli\u003eStandby mode powers down the amplifier channels and keeps the DSP running\u003c\/li\u003e\n  \u003cli\u003eLimiters, short-circuit, DC and thermal protection, and mains inrush control\u003c\/li\u003e\n  \u003cli\u003eVariable-speed fans with front-to-rear airflow and a cleanable front filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 4\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power per channel:\u003c\/strong\u003e 500 W at 8 ohms, 1000 W at 4 ohms, 1400 W at 2.7 ohms, 1200 W at 2 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput power, bridged:\u003c\/strong\u003e 2000 W at 8 ohms, 2400 W at 4 ohms\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMinimum load:\u003c\/strong\u003e 2 ohms with reduced output (4 ohms bridged)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTHD (1 dB below maximum output):\u003c\/strong\u003e below 0.18% at 1 kHz, below 0.2% from 20 Hz to 20 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 20 kHz (+0\/-0.5 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity for maximum power:\u003c\/strong\u003e 6.2 dBu\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 20 kilohms, active balanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInput CMRR:\u003c\/strong\u003e above 60 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping factor:\u003c\/strong\u003e above 400 (1 kHz, 8 ohms)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDSP sample rate:\u003c\/strong\u003e 96 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAES3 input sample rates:\u003c\/strong\u003e 32 kHz to 192 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAuxiliary outputs:\u003c\/strong\u003e active balanced XLR, +18 dBu maximum, above 114 dB dynamic range\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDelay:\u003c\/strong\u003e up to 650 ms per input and per output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover filters:\u003c\/strong\u003e Bessel and Butterworth 6 to 48 dB per octave, Linkwitz-Riley 12, 24 and 48 dB per octave\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCurrent draw:\u003c\/strong\u003e 6.0 A nominal at 120 V into 4 ohms, below 5 W in standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains:\u003c\/strong\u003e 120 V, powerCON inlet\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRack size:\u003c\/strong\u003e 2U, 19 in\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (H x W x D):\u003c\/strong\u003e 88 x 482 x 428 mm (3.5 x 19.0 x 16.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10.0 kg (22.0 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShipping weight:\u003c\/strong\u003e 12.0 kg (26.5 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380145225977,"sku":"DA40-DSP","price":11099.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-da40-dsp-1-front.jpg?v=1792175629"},{"product_id":"dynaudio-dca-s1400","title":"Dynaudio DCA S1400 Stereo Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Acoustics DCA S1400 is a 120V stereo power amplifier for Dynaudio's passive M-series monitors and subwoofers. Dynaudio pairs its DCA-series amplifiers with analog filter cards to run passive main monitors as active two-way systems. On the maker's speaker pages, this model appears as the DCA1400.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to the M-series\u003c\/h3\u003e\n\u003cp\u003eDynaudio recommends the DCA1400 for the MS18 subwoofer, and it lists the DCA800 or DCA1400 for the M4 MkII, M4 MkII Mini and M3FX main monitors. For the M3FX, the recommendation calls for a DCA with filters. For the M1 MkII, M2 MkII, M3 MkII, M3F, C3 MkII and MS15, Dynaudio names the DCA800.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo power amplifier from the Dynaudio Acoustics DCA series\u003c\/li\u003e\n  \u003cli\u003eRecommended by Dynaudio for the M4 MkII, M4 MkII Mini, M3FX and MS18\u003c\/li\u003e\n  \u003cli\u003eRuns M-series main monitors as active two-way systems with analog filter cards\u003c\/li\u003e\n  \u003cli\u003e120V model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stereo power amplifier\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Dynaudio Acoustics DCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains voltage:\u003c\/strong\u003e 120V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e M3FX (with filters), M4 MkII, M4 MkII Mini, MS18\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380146077945,"sku":"DCA-S1400","price":6599.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"dynaudio-dca-s1400b","title":"Dynaudio DCA S1400 Stereo Power Amplifier (Binding Post, 120V)","description":"\u003cp\u003eThe Dynaudio Acoustics DCA S1400 is a 120V stereo power amplifier for Dynaudio's passive M-series monitors and subwoofers, in the version with binding post speaker outputs. Dynaudio pairs its DCA-series amplifiers with analog filter cards to run passive main monitors as active two-way systems. On the maker's speaker pages, this model appears as the DCA1400.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to the M-series\u003c\/h3\u003e\n\u003cp\u003eDynaudio recommends the DCA1400 for the MS18 subwoofer, and it lists the DCA800 or DCA1400 for the M4 MkII, M4 MkII Mini and M3FX main monitors. For the M3FX, the recommendation calls for a DCA with filters. For the M1 MkII, M2 MkII, M3 MkII, M3F, C3 MkII and MS15, Dynaudio names the DCA800.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo power amplifier from the Dynaudio Acoustics DCA series\u003c\/li\u003e\n  \u003cli\u003eRecommended by Dynaudio for the M4 MkII, M4 MkII Mini, M3FX and MS18\u003c\/li\u003e\n  \u003cli\u003eRuns M-series main monitors as active two-way systems with analog filter cards\u003c\/li\u003e\n  \u003cli\u003eBinding post speaker outputs\u003c\/li\u003e\n  \u003cli\u003e120V model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stereo power amplifier\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Dynaudio Acoustics DCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e Binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains voltage:\u003c\/strong\u003e 120V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e M3FX (with filters), M4 MkII, M4 MkII Mini, MS18\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380147814649,"sku":"DCA-S1400B","price":6599.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"dynaudio-dca-s800","title":"Dynaudio DCA S800 Stereo Power Amplifier (120V)","description":"\u003cp\u003eThe Dynaudio Acoustics DCA S800 is a 120V stereo power amplifier for Dynaudio's passive M-series monitors and subwoofers. Dynaudio pairs its DCA-series amplifiers with analog filter cards to run passive main monitors as active two-way systems. On the maker's speaker pages, this model appears as the DCA800.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to the M-series\u003c\/h3\u003e\n\u003cp\u003eDynaudio names the DCA800 for the M1 MkII, M2 MkII, M3 MkII, M3F and C3 MkII monitors and the MS15 subwoofer. For the M2 MkII, M3 MkII, M3F and C3 MkII, the recommendation calls for a DCA800 with filters. Dynaudio supplies the C3 MkII as an active two-way system with two DCA stereo power amplifiers carrying built-in crossover cards, or with a DA40 DSP. The M3FX, M4 MkII and M4 MkII Mini list the DCA800 or the DCA1400.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo power amplifier from the Dynaudio Acoustics DCA series\u003c\/li\u003e\n  \u003cli\u003eRecommended by Dynaudio for the M1 MkII, M2 MkII, M3 MkII, M3F, C3 MkII and MS15\u003c\/li\u003e\n  \u003cli\u003eAlso listed for the M3FX, M4 MkII and M4 MkII Mini\u003c\/li\u003e\n  \u003cli\u003eRuns M-series main monitors as active two-way systems with analog filter cards\u003c\/li\u003e\n  \u003cli\u003e120V model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stereo power amplifier\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Dynaudio Acoustics DCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains voltage:\u003c\/strong\u003e 120V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e M1 MkII, M2 MkII (with filters), M3 MkII (with filters), M3F (with filters), C3 MkII (with filters), M3FX (with filters), M4 MkII, M4 MkII Mini, MS15\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380147978489,"sku":"DCA-S800","price":5399.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"dynaudio-dca-s800b","title":"Dynaudio DCA S800 Stereo Power Amplifier (Binding Post, 120V)","description":"\u003cp\u003eThe Dynaudio Acoustics DCA S800 is a 120V stereo power amplifier for Dynaudio's passive M-series monitors and subwoofers, in the version with binding post speaker outputs. Dynaudio pairs its DCA-series amplifiers with analog filter cards to run passive main monitors as active two-way systems. On the maker's speaker pages, this model appears as the DCA800.\u003c\/p\u003e\n\n\u003ch3\u003eMatched to the M-series\u003c\/h3\u003e\n\u003cp\u003eDynaudio names the DCA800 for the M1 MkII, M2 MkII, M3 MkII, M3F and C3 MkII monitors and the MS15 subwoofer. For the M2 MkII, M3 MkII, M3F and C3 MkII, the recommendation calls for a DCA800 with filters. Dynaudio supplies the C3 MkII as an active two-way system with two DCA stereo power amplifiers carrying built-in crossover cards, or with a DA40 DSP. The M3FX, M4 MkII and M4 MkII Mini list the DCA800 or the DCA1400.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eStereo power amplifier from the Dynaudio Acoustics DCA series\u003c\/li\u003e\n  \u003cli\u003eRecommended by Dynaudio for the M1 MkII, M2 MkII, M3 MkII, M3F, C3 MkII and MS15\u003c\/li\u003e\n  \u003cli\u003eAlso listed for the M3FX, M4 MkII and M4 MkII Mini\u003c\/li\u003e\n  \u003cli\u003eRuns M-series main monitors as active two-way systems with analog filter cards\u003c\/li\u003e\n  \u003cli\u003eBinding post speaker outputs\u003c\/li\u003e\n  \u003cli\u003e120V model\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Stereo power amplifier\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSeries:\u003c\/strong\u003e Dynaudio Acoustics DCA\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeaker outputs:\u003c\/strong\u003e Binding posts\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMains voltage:\u003c\/strong\u003e 120V\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended for:\u003c\/strong\u003e M1 MkII, M2 MkII (with filters), M3 MkII (with filters), M3F (with filters), C3 MkII (with filters), M3FX (with filters), M4 MkII, M4 MkII Mini, MS15\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380148994297,"sku":"DCA-S800B","price":5399.0,"currency_code":"CAD","in_stock":true}]},{"product_id":"dynaudio-dyn-ceilingv2","title":"Dynaudio Ceiling Mount Bracket","description":"\u003cp\u003eThe Dynaudio Ceiling Mounting Bracket hangs a Dynaudio Classic BM or LYD series studio monitor from the ceiling, so the speaker can sit where the room and the listening position need it. König \u0026amp; Meyer makes it in Germany for Dynaudio, and it holds up to 12.5 kg (27.5 lb).\u003c\/p\u003e\n\n\u003ch3\u003eAdjustment\u003c\/h3\u003e\n\u003cp\u003eThe speaker tilts from 0 to 30 degrees vertically and swivels 45 degrees either way horizontally, so you can aim it down at the listening position from above.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMade in Germany by König \u0026amp; Meyer for Dynaudio\u003c\/li\u003e\n  \u003cli\u003eDesigned for Dynaudio Classic BM and LYD series monitors\u003c\/li\u003e\n  \u003cli\u003e0 to 30 degree vertical adjustment\u003c\/li\u003e\n  \u003cli\u003e+\/- 45 degree horizontal adjustment\u003c\/li\u003e\n  \u003cli\u003eHolds up to 12.5 kg (27.5 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 12.5 kg (27.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVertical adjustment:\u003c\/strong\u003e 0 to 30 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHorizontal adjustment:\u003c\/strong\u003e +\/- 45 degrees\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 140 x 305 x 440 mm (5 1\/2 x 12 x 17 3\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3 kg (6.6 lb)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380150632697,"sku":"DYN-CEILINGV2","price":209.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-dyn-ceilingv2-1.jpg?v=1792176516"},{"product_id":"dynaudio-dyn-wallv2","title":"Dynaudio Wall Mounting Bracket","description":"\u003cp\u003eThe Dynaudio Wall Mounting Bracket holds a loudspeaker on a wall in a studio or installation. It carries up to 12.5 kg (27.5 lb), and the bracket itself weighs 2.5 kg.\u003c\/p\u003e\n\n\u003ch3\u003eDynaudio's Bracket Range\u003c\/h3\u003e\n\u003cp\u003eThe bracket belongs to Dynaudio's professional mounting range, next to the Ceiling Mounting Bracket and the Core Mounting Brackets for Core monitors. Check your speaker's weight against the 12.5 kg rating before mounting.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWall mount for a single loudspeaker\u003c\/li\u003e\n  \u003cli\u003e12.5 kg (27.5 lb) load capacity\u003c\/li\u003e\n  \u003cli\u003ePart of Dynaudio's professional bracket range\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 12.5 kg (27.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 140 x 282 x 317 mm (5.5 x 11.1 x 12.5 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 kg (5.5 lb)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380151976185,"sku":"DYN-WALLV2","price":229.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-wall-bracket-1.jpg?v=1792175933"},{"product_id":"dynaudio-dyn-sf1","title":"Dynaudio SF1 Desk and Sideboard Stand","description":"\u003cp\u003eThe Dynaudio SF1 is a low desk and sideboard stand that tilts a compact speaker slightly upward. Raising the front of the speaker reduces the reflections that the desk, shelf or sideboard surface would otherwise add to the sound. The stand is 42 mm high on a 187 x 208 mm footprint.\u003c\/p\u003e\n\n\u003ch3\u003eFit and Finish\u003c\/h3\u003e\n\u003cp\u003eThe SF1 suits small and medium-sized compact speakers, which sit on its 110 x 190 mm top plate. Dynaudio makes it in matte black and in silver.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSlight upward tilt for compact speakers\u003c\/li\u003e\n  \u003cli\u003eReduces reflections from the surface underneath\u003c\/li\u003e\n  \u003cli\u003e42 mm height for desks, shelves and sideboards\u003c\/li\u003e\n  \u003cli\u003eMade in matte black and in silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 42 mm (1.7 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFootprint (W x D):\u003c\/strong\u003e 187 x 208 mm (7.4 x 8.2 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTop plate (W x D):\u003c\/strong\u003e 110 x 190 mm (4.3 x 7.5 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColors:\u003c\/strong\u003e Matte black, silver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380152959225,"sku":"DYN-SF1","price":97.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-sf1-1.jpg?v=1792175931"},{"product_id":"dynaudio-core-mount","title":"Dynaudio Core Mounting Bracket Type 1 for Core 7, 47 and 59 (Black)","description":"\u003cp\u003eThe Dynaudio Core Mounting Bracket (Type 1) holds a Core 7, Core 47 or Core 59 monitor on a wall or on other König \u0026amp; Meyer mounting hardware, in the orientations that surround and immersive rooms call for. König \u0026amp; Meyer in Germany designs and builds it for Dynaudio. The bracket is fully adjustable, carries up to 25 kg, and is made of powder-coated steel and aluminum.\u003c\/p\u003e\n\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe bracket grips the monitor at its sides with two locking knobs. Its back plate connects to König \u0026amp; Meyer speaker holders, and to VESA 200 x 200 mounts with the supplied M6 x 20 mm bolts, so it combines with other K\u0026amp;M brackets for many different setups.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Dynaudio Core 7, Core 47 and Core 59\u003c\/li\u003e\n  \u003cli\u003eDesigned and made by König \u0026amp; Meyer\u003c\/li\u003e\n  \u003cli\u003eFully adjustable\u003c\/li\u003e\n  \u003cli\u003eFits König \u0026amp; Meyer holders and VESA 200 x 200 mounts\u003c\/li\u003e\n  \u003cli\u003ePowder-coated steel and aluminum\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 25 kg (55 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 233 mm (9 1\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 322 mm (12 5\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase plate:\u003c\/strong\u003e 250 x 232 mm (9 7\/8 x 9 1\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.5 kg (5.5 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMounting plate\u003c\/li\u003e\n  \u003cli\u003e2 side arms\u003c\/li\u003e\n  \u003cli\u003e2 locking knobs with washers\u003c\/li\u003e\n  \u003cli\u003eKönig \u0026amp; Meyer connector\u003c\/li\u003e\n  \u003cli\u003e4 M6 x 12 mm bolts\u003c\/li\u003e\n  \u003cli\u003e4 M6 x 20 mm bolts for VESA 200 x 200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380153254137,"sku":"CORE-MOUNT","price":249.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-mount-1.jpg?v=1792176303"},{"product_id":"dynaudio-core-mount2","title":"Dynaudio Core Mounting Bracket Type 2 for Core 5 (Black)","description":"\u003cp\u003eThe Dynaudio Core Mounting Bracket (Type 2) is made for the Core 5 reference monitor, so it can be placed with the precision an immersive mix room needs. The bracket is fully adjustable, works with brackets from the König \u0026amp; Meyer system for a wide range of setups, and is built from solid steel with a 38 kg load rating.\u003c\/p\u003e\n\n\u003ch3\u003eMounting\u003c\/h3\u003e\n\u003cp\u003eThe bracket holds the Core 5 at its sides with two locking knobs and lets it hang vertically or horizontally. Its base plate measures 231 x 100 mm.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMade for Dynaudio Core 5\u003c\/li\u003e\n  \u003cli\u003eFully adjustable\u003c\/li\u003e\n  \u003cli\u003eCompatible with König \u0026amp; Meyer brackets\u003c\/li\u003e\n  \u003cli\u003eSolid steel construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 38 kg (83.78 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 268.5 x 336.5 x 100 mm (10 5\/8 x 13 1\/4 x 3 7\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBase plate:\u003c\/strong\u003e 231 x 100 mm (9 x 3 7\/8 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.64 kg (3.62 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380154466553,"sku":"CORE-MOUNT2","price":219.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-mount2-1.jpg?v=1792176305"},{"product_id":"dynaudio-lyd-48-l","title":"Dynaudio LYD 48 8\" 3-Way Active Studio Monitor (White, Left)","description":"\u003cp\u003eThe Dynaudio LYD 48 is the largest monitor in the LYD series, a 3-way active design for near or midfield listening in project and professional studios. An 8-inch MSP woofer, a 4-inch MSP midrange and a 1.1-inch soft-dome tweeter each run from their own Class-D amplifier, 80 W for the woofer and 50 W each for the midrange and tweeter, through a 24-bit\/96 kHz DSP signal path. It plays to 112 dB maximum SPL as a pair, with response down to 50 Hz. This listing is the left speaker in White Satin.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eThe LYD 48 lies horizontally, and Dynaudio builds it in dedicated left and right versions. The left speaker carries its woofer on the right side of the baffle, so when the pair is set up, both woofers sit on the inside, which is the placement the LYD manual recommends. Pair it with the LYD 48 right speaker in the same finish. The manual puts the ideal listening distance at 1.5 to 2.5 m.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 48 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way design with 8\" MSP woofer, 4\" MSP midrange and 1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eTri-amplified: 80 W woofer, 50 W midrange and 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eHorizontal cabinet in dedicated left and right versions\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 3-way near and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 80 W woofer, 50 W midrange, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 460 Hz and 5.5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 369 x 234 x 328 mm (14.5 x 9.2 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg (26.5 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, left speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380156006649,"sku":"LYD-48\/L","price":1649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-48-l-01.jpg?v=1792175815"},{"product_id":"dynaudio-lyd-48-r","title":"Dynaudio LYD 48 8\" 3-Way Active Studio Monitor (White, Right)","description":"\u003cp\u003eThe Dynaudio LYD 48 is the largest monitor in the LYD series, a 3-way active design for near or midfield listening in project and professional studios. An 8-inch MSP woofer, a 4-inch MSP midrange and a 1.1-inch soft-dome tweeter each run from their own Class-D amplifier, 80 W for the woofer and 50 W each for the midrange and tweeter, through a 24-bit\/96 kHz DSP signal path. It plays to 112 dB maximum SPL as a pair, with response down to 50 Hz. This listing is the right speaker in White Satin.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eThe LYD 48 lies horizontally, and Dynaudio builds it in dedicated left and right versions. The right speaker carries its woofer on the left side of the baffle, so when the pair is set up, both woofers sit on the inside, which is the placement the LYD manual recommends. Pair it with the LYD 48 left speaker in the same finish. The manual puts the ideal listening distance at 1.5 to 2.5 m.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 48 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way design with 8\" MSP woofer, 4\" MSP midrange and 1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eTri-amplified: 80 W woofer, 50 W midrange and 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eHorizontal cabinet in dedicated left and right versions\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 3-way near and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 80 W woofer, 50 W midrange, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 460 Hz and 5.5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 369 x 234 x 328 mm (14.5 x 9.2 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg (26.5 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, right speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e White Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380161708281,"sku":"LYD-48\/R","price":1649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-48-r-01.jpg?v=1792175820"},{"product_id":"dynaudio-lyd-48b-l","title":"Dynaudio LYD 48 8\" 3-Way Active Studio Monitor (Black, Left)","description":"\u003cp\u003eThe Dynaudio LYD 48 is the largest monitor in the LYD series, a 3-way active design for near or midfield listening in project and professional studios. An 8-inch MSP woofer, a 4-inch MSP midrange and a 1.1-inch soft-dome tweeter each run from their own Class-D amplifier, 80 W for the woofer and 50 W each for the midrange and tweeter, through a 24-bit\/96 kHz DSP signal path. It plays to 112 dB maximum SPL as a pair, with response down to 50 Hz. This listing is the left speaker in Black Satin.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eThe LYD 48 lies horizontally, and Dynaudio builds it in dedicated left and right versions. The left speaker carries its woofer on the right side of the baffle, so when the pair is set up, both woofers sit on the inside, which is the placement the LYD manual recommends. Pair it with the LYD 48 right speaker in the same finish. The manual puts the ideal listening distance at 1.5 to 2.5 m.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 48 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way design with 8\" MSP woofer, 4\" MSP midrange and 1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eTri-amplified: 80 W woofer, 50 W midrange and 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eHorizontal cabinet in dedicated left and right versions\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 3-way near and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 80 W woofer, 50 W midrange, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 460 Hz and 5.5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 369 x 234 x 328 mm (14.5 x 9.2 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg (26.5 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, left speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380166492409,"sku":"LYD-48B\/L","price":1649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-48b-l-01.jpg?v=1792175823"},{"product_id":"dynaudio-lyd-48b-r","title":"Dynaudio LYD 48 8\" 3-Way Active Studio Monitor (Black, Right)","description":"\u003cp\u003eThe Dynaudio LYD 48 is the largest monitor in the LYD series, a 3-way active design for near or midfield listening in project and professional studios. An 8-inch MSP woofer, a 4-inch MSP midrange and a 1.1-inch soft-dome tweeter each run from their own Class-D amplifier, 80 W for the woofer and 50 W each for the midrange and tweeter, through a 24-bit\/96 kHz DSP signal path. It plays to 112 dB maximum SPL as a pair, with response down to 50 Hz. This listing is the right speaker in Black Satin.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eThe LYD 48 lies horizontally, and Dynaudio builds it in dedicated left and right versions. The right speaker carries its woofer on the left side of the baffle, so when the pair is set up, both woofers sit on the inside, which is the placement the LYD manual recommends. Pair it with the LYD 48 left speaker in the same finish. The manual puts the ideal listening distance at 1.5 to 2.5 m.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to Your Room\u003c\/h3\u003e\n\u003cp\u003eThree DSP switches on the rear panel adapt the LYD 48 to the room. Bass Extension moves the low-frequency cutoff 10 Hz lower or higher, trading bass reach against maximum level. Sound Balance tilts the response by 1.5 dB at either end of the spectrum for a brighter or darker voicing, and Position applies a boundary filter for speakers placed within 50 cm of a wall.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way design with 8\" MSP woofer, 4\" MSP midrange and 1.1\" soft-dome tweeter\u003c\/li\u003e\n  \u003cli\u003eTri-amplified: 80 W woofer, 50 W midrange and 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e24-bit\/96 kHz DSP signal path\u003c\/li\u003e\n  \u003cli\u003eHorizontal cabinet in dedicated left and right versions\u003c\/li\u003e\n  \u003cli\u003eBass Extension switch: -10 Hz, 0 Hz or +10 Hz\u003c\/li\u003e\n  \u003cli\u003eSound Balance switch: Bright, Neutral or Dark\u003c\/li\u003e\n  \u003cli\u003ePosition switch: Free or Wall (within 50 cm of a wall)\u003c\/li\u003e\n  \u003cli\u003eInput sensitivity switch: +6 dB, 0 dB or -6 dB\u003c\/li\u003e\n  \u003cli\u003eAuto standby mode\u003c\/li\u003e\n  \u003cli\u003eBalanced XLR and unbalanced RCA inputs\u003c\/li\u003e\n  \u003cli\u003eMade in Denmark\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active 3-way near and midfield monitor\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 8\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4\" MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1\" soft dome\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 80 W woofer, 50 W midrange, 50 W tweeter, Class-D\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e DSP-based, 460 Hz and 5.5 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 50 Hz to 21 kHz (+\/-3 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 112 dB (1 m, pair)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e 100 mV for 85 dB SPL at 1 m (0 dB setting)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e Bass reflex, rear port\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e XLR balanced, RCA unbalanced\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100-240 V AC, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 100 W maximum, 0.5 W standby\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 369 x 234 x 328 mm (14.5 x 9.2 x 12.9 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 12 kg (26.5 lbs)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, right speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Black Satin\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSold as:\u003c\/strong\u003e Single speaker\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67380172357881,"sku":"LYD-48B\/R","price":1649.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/lyd-48b-r-01.jpg?v=1792175827"},{"product_id":"dynaudio-core-47-r","title":"Dynaudio Core 47 3-Way Active Studio Monitor (Dark Grey, Right)","description":"\u003cp\u003eThe Dynaudio Core 47 is a compact 3-way active reference monitor for music studios, TV dub stages, edit suites, broadcast trucks, ADR rooms and game audio suites, and it works as a surround speaker in multichannel and immersive rooms. A 7-inch MSP woofer, a 4-inch MSP midrange and a 28 mm Esotar Pro soft-dome tweeter with a Hexis inner dome run from three Pascal Class D amplifiers, 500 W, 500 W and 150 W. Crossover points at 475 Hz and 5,250 Hz put more of the vocal range in one driver, which helps with decisions on vocal balance and dialogue.\u003c\/p\u003e\n\n\u003ch3\u003eLeft and Right Models\u003c\/h3\u003e\n\u003cp\u003eDynaudio builds the Core 47 in two mirrored models, with the woofer on either side of the tweeter and midrange, and the manual calls for horizontal placement only. This listing is the right speaker, sold singly, with the woofer to the left of the tweeter and midrange as seen from the front. Add a Core 47 Left for a stereo pair. The pair can run tweeters-in or tweeters-out to suit the room and listening position.\u003c\/p\u003e\n\u003cp\u003eA 44 mm front bezel stiffens the cabinet. Indentations on all four sides take Dynaudio's isolation pads, and the Core Mounting Bracket (Type 1) holds the Core 47 in surround and immersive layouts.\u003c\/p\u003e\n\n\u003ch3\u003eTuning to the Room\u003c\/h3\u003e\n\u003cp\u003eSwitches on the rear panel set the DSP for where the Core 47 sits. Position 1 chooses Anechoic, Desk or Soffit, Position 2 corrects the bass for a wall or corner within 50 cm, and the Sound Balance switch tilts the whole response by 1.5 dB at each end toward Bright or Dark while keeping the phase between the drivers intact. A Bass Extension switch adds an 80 Hz high-pass filter with time alignment for use with a Core Sub or Core Sub Compact.\u003c\/p\u003e\n\u003cp\u003eA four-position switch matches the analog input to the maximum output of your interface or console, from 0 to +24 dBu. A second switch sets the level a -20 dBFS signal produces at 1 m (85, 91, 96 or 105 dB), so every Core speaker in a room can share one calibrated reference. On the AES3 input the Core 47 runs at the incoming sample rate with no sample-rate conversion and locks to the AES clock or to an external word clock.\u003c\/p\u003e\n\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e3-way active design with DSP crossovers at 475 Hz and 5,250 Hz\u003c\/li\u003e\n  \u003cli\u003e28 mm Esotar Pro soft-dome tweeter with Hexis inner dome\u003c\/li\u003e\n  \u003cli\u003e4-inch MSP midrange and 7-inch MSP woofer\u003c\/li\u003e\n  \u003cli\u003ePascal Class D amplification: 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003ePosition, boundary and Sound Balance DSP filters\u003c\/li\u003e\n  \u003cli\u003e80 Hz Bass Extension high-pass for use with a Core subwoofer\u003c\/li\u003e\n  \u003cli\u003eAnalog XLR and AES3 inputs, AES3 pass-through output and word clock input\u003c\/li\u003e\n  \u003cli\u003e44 mm front bezel and indentations on all four sides\u003c\/li\u003e\n  \u003cli\u003eDrivers made in Denmark, each speaker calibrated at the factory\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 3-way active nearfield monitor, front-loaded bass reflex\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTweeter:\u003c\/strong\u003e 1.1-inch (28 mm) Esotar Pro soft dome with Hexis\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMidrange:\u003c\/strong\u003e 4-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 7-inch MSP\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifiers:\u003c\/strong\u003e Pascal Class D, 500 W woofer, 500 W midrange, 150 W tweeter\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCrossover:\u003c\/strong\u003e 475 Hz and 5,250 Hz, DSP-based\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (±3 dB):\u003c\/strong\u003e 41 Hz to 24 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency response (-6 dB):\u003c\/strong\u003e 35 Hz to 30 kHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 113 dB at 1 m anechoic, 118 dB half space\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e Balanced analog XLR, AES3 digital XLR, BNC word clock (75 ohm)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e AES3 XLR pass-through\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDigital resolution:\u003c\/strong\u003e Up to 24-bit\/192 kHz (32, 44.1, 48, 96 and 192 kHz), no sample-rate conversion\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eService port:\u003c\/strong\u003e USB Type B for firmware updates\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 100 to 240 V, 50\/60 Hz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions (W x H x D):\u003c\/strong\u003e 390 x 240 x 355 mm (15 3\/8 x 9 7\/16 x 14 in)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 15.6 kg (34.4 lb)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOrientation:\u003c\/strong\u003e Horizontal, right speaker\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Dark Grey\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSpeakers per box:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":67387845705977,"sku":"CORE-47\/R","price":3399.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/dynaudio-core-47-r-1.jpg?v=1792179050"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/collections\/dynaudio-logo-white.png?v=1792175569","url":"https:\/\/blackoutaudio.com\/collections\/dynaudio.oembed","provider":"Blackout Audio","version":"1.0","type":"link"}