{"title":"DI Boxes","description":"\u003cp\u003ePassive and active DI boxes and re-amp boxes.\u003c\/p\u003e","products":[{"product_id":"art-avdibox","title":"AV DI Box","description":"\u003cp\u003eThe AV Direct from ART is a direct box with a very specific purpose. It is the ideal solution for any situation where stereo iPods, notebook computers, consumer DVD players, HiFi equipment, or video machines have to be connected to a single XLR microphone level input.\u003c\/p\u003e\u003cp\u003eUnlike standard \"gender bender\" cables or DI boxes, the AV Direct can accept virtually any input connection and output level (including amplified speaker outputs) and offers remote level control, ideal for setting the volume of a component at the source, rather than in an AV room, audio closet or installation rack.\u003c\/p\u003e\u003cp\u003eThe AV Direct has stereo RCA, 3.5mm and 1\/4\" TRS line level inputs as well as a 1\/4\" and bare wire pressure clip speaker level inputs. A switchable high-cut filter and ground lift allow the AV Direct to effectively filter out any extraneous noise.\u003c\/p\u003e\u003cp\u003eThe speaker-level inputs are heavily padded and transformer isolated from the XLR output, allowing amplified speaker level (up to 100 watts at 8 ohms) to be tapped off, and sent to a microphone level input. A 20 Hz to 20 kHz frequency response ensures the AV Direct will function seamlessly with any high-quality audio source.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362172153,"sku":"AVDIBOX","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1233145629_530095.jpg?v=1750191591"},{"product_id":"art-btdi","title":"BT DI","description":"\u003cp\u003eStream audio from any Bluetooth-capable mobile device or computer to your mixer, PA, or recording system with the BT-DI Project Series Bluetooth Direct Box from ART. Particularly effective in live stage applications where there may be great distances between audio sources and their targets, this compact and rugged Bluetooth DAC is engineered for maximum flexibility with minimal complexity or hassle.\u003c\/p\u003e\u003cp\u003eThe BT-DI comes with robust Bluetooth support and a long range of operation, aided by a built-in antenna. The unit can be powered by either USB or via two channels of phantom power over the noise-free, transformer-isolated, balanced XLR outputs. A main output level control is provided and can be bypassed for a fixed XLR output level, and an extra 1\/4\" TRS output is also provided, which can be switched between stereo and mono to feed headphones or line-level inputs.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362204921,"sku":"BTDI","price":139.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1666608358_1713858.jpg?v=1750191596"},{"product_id":"art-cleanboxpro","title":"CleanBox Pro","description":"\u003cp\u003eThe ART CLEANBoxPro provides two channels of unbalanced to balanced level conversion and two channels of balanced to unbalanced level conversion in a rugged, compact, and portable unit. Balanced lines offer increased immunity to external electrical noise, such as hum. Since a balanced system minimizes induced noise, it is the preferred method of connecting audio gear, especially when long lengths of cable are used.\u003c\/p\u003e\u003cp\u003eOne section of the CLEANBoxPro converts two channels of consumer-level unbalanced input signals into two channels of pro line-level balanced output signals. It has two RCA jack inputs and a stereo mini-phone jack input connected in parallel. The balanced output feeds two XLR male jacks.\u003c\/p\u003e\u003cp\u003eThe other section of the CLEANBoxPro converts two channels of line-level balanced input signals into two channels of consumer unbalanced output signals. It has two XLR female input jacks. The unbalanced output feeds two RCA jacks and a stereo mini-phone jack connected in parallel. Each section has stereo level controls to optimize signal levels. An LED indicator lights when power is applied.\u003c\/p\u003e\u003cp\u003eThe CLEANBoxPro can be used in application areas including, but not limited to home or professional recording studios, live sound, PA, permanent installs, DJ, AV, consumer HiFi, podcasting and broadcasting. The CLEANBoxPro can be used with: mixers, audio processors, laptop computers, computer sound cards, CD\/DVD players, video gaming machines, MP3 player\/recorders, powered monitors and digital audio workstations.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362237689,"sku":"CLEANBOXPRO","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1394012740_288115.jpg?v=1750191603"},{"product_id":"art-dadb","title":"DADB","description":"\u003cp\u003eThe dADB from ART is a dual channel active direct box that acts as two independent, high-quality interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance 1\/4\" inputs are buffered by extremely low-noise, active electronics to deliver isolated, balanced, low impedance outputs. A flat and wide frequency response, even at high input levels, makes the unit a virtually transparent DI solution.\u003c\/p\u003e\u003cp\u003eInput attenuation switches on each channel allow for attaching a wide range of source signal levels, while independent parallel \"Thru\" jacks allow for tapping the signal chains. A ground lift switch on each channel allows for totally isolating any two systems by separating the input and output signal grounds, thus reducing hum and ground-loop noise.\u003c\/p\u003e\u003cp\u003eSwitchable low-pass Bessel filters eliminate high frequency interference, primarily from radio frequencies before they can get into the main system. They also effectively reduce digital noise generated by computers, making the unit an ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.\u003c\/p\u003e\u003cp\u003eThe dADB can be powered from phantom power or by a 9V battery when external power is not available. Low current draw should provide more than 100 hours of operation with a new battery (alkaline recommended). The compact, black, all-steel case and active design ensure long-term reliability in live sound, permanent\/fixed installs, DJ, or virtually any PA application.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362303225,"sku":"DADB","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1329902137_844854.jpg?v=1750191608"},{"product_id":"art-dpdb","title":"DPDB","description":"\u003cp\u003eThe dPDB passive direct box from ART features two high-quality direct boxes in one portable enclosure. It is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows for connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.\u003c\/p\u003e\u003cp\u003eThe unit features switchable input attenuation, a 50k Ω instrument input, 50k Ω parallel link jack, a 600 Ω XLR output jack and a switchable ground lift. It excels at impedance matching and improving the sound of any instrument plugged into it. Enclosed in a rugged steel chassis, it is designed and manufactured to the highest standards to provide years of quiet, reliable performance.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362401529,"sku":"DPDB","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1462899929_284819.jpg?v=1750191611"},{"product_id":"art-dualrdb","title":"Dual RDB","description":"\u003cp\u003eThe Dual RDB from ART is a dual re-amping direct box that is an ideal solution for any application where stereo or dual line level signals from recording interfaces, computers, mixers, iPods, consumer audio or video machines need to be connected to XLR microphone or 1\/4\" instrument level inputs. The interface functions transparently with any high quality audio source.\u003c\/p\u003e\u003cp\u003eThe unit features both 1\/4\" TRS phone and XLR inputs, and outputs microphone or instrument levels. Two variable input level controls allow for proper level staging at the source rather than anywhere else in the signal chain. Two high-quality isolation transformers prevent ground loops from occurring when connecting various systems together.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362467065,"sku":"DUALRDB","price":99.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/8e354b3b6773758d27aea8d7f2b63bc6_1800x1800_61556214-4ae9-4c31-b009-8e93d26818db.png?v=1750275624"},{"product_id":"art-dualxdirect","title":"DUALXDirect","description":"\u003cp\u003eThe ART DUALXDirect is a 2-channel, active direct box. It converts instrument-, line-, or speaker-level sources into isolated, balanced, low-impedance signals for connection to mixers, audio interfaces, and other devices with balanced inputs. The DUALXDirect can handle high input levels, and offers a flat and wide frequency response. It performs well in a variety of situations, including when used over long cable runs in high-noise environments.\u003c\/p\u003e\u003cp\u003eThe inputs are on 1\/4\"\/XLR combo jacks, and the outputs on balanced XLR connectors. Each channel has a ground lift switch for reducing hum and ground-loop noise, and an input attenuator switch that pads the signal coming in by 30 dB. A pair of 1\/4\" Thru jacks let you simultaneously pass your source signal through to an amp or other device.\u003c\/p\u003e\u003cp\u003eThe DUALXDirect runs on the phantom power of the device connected to its output. If those aren't available, a 9V battery (included) supplies the juice.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362499833,"sku":"DUALXDIRECT","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1299682026_758694.jpg?v=1750191614"},{"product_id":"art-dualzdirect","title":"DUALZDirect","description":"\u003cp\u003eThe DUALZDirect is a professional, two-channel, passive direct box that converts instrument, line, and speaker-level sources, via transformer, into signals compatible with balanced, low-impedance devices such as mixers and audio interfaces.\u003c\/p\u003e\u003cp\u003eBoth channels are totally independent and have identical features. These include attenuator switches that pad the inputs by -20 or -40 dB, and ground-lift switches that fully isolate each input from the chassis and the output to help eliminate hum and ground-loop noise.\u003c\/p\u003e\u003cp\u003eYou also get phase invert switches, 1\/4\" pass-through jacks, and switchable low-pass filters. The latter attenuate -3 dB at 30 kHz, and are designed to reduce radio-frequency interference (RFI) and digital computer noise. Combine all that functionality with a solid, black-anodized aluminum case, and you've got a handy and road-worthy direct box.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362532601,"sku":"DUALZDIRECT","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1299682026_758695.jpg?v=1750191616"},{"product_id":"art-pdb","title":"PDB","description":"\u003cp\u003eThe PDB passive direct box from ART is a roadworthy DI for connection of the outputs of electronic musical instruments (or other audio sources) to the balanced inputs of mixer consoles and other balanced inputs. It also allows for connection of a music source to an instrument amplifier while simultaneously patching it to a mixer.\u003c\/p\u003e\u003cp\u003eThe unit features switchable input attenuation, a 50k Ω instrument input, 50k Ω parallel link jack, a 600 Ω XLR output jack and a switchable ground lift. It excels at impedance matching and improving the sound of any instrument plugged into it. Enclosed in a rugged steel chassis, it is designed and manufactured to the highest standards to provide years of quiet, reliable performance.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362598137,"sku":"PDB","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1462900837_270061.jpg?v=1750191619"},{"product_id":"art-pdb4","title":"PDB4","description":"\u003cp\u003eThe ART PDB4- Rackmountable 4-Channel Passive Direct Box is designed for studio and live performance applications. The 1RU 19\" rackmountable passive device features four fully transformer isolated direct boxes with inputs and outputs isolated from one another to maximize channel separation and remove system ground loops. It can be used to connect the 1\/4\" outputs of electronic music instruments and other audio sources to the balanced XLR inputs of a mixing console or other balanced audio equipment.\u003c\/p\u003e\u003cp\u003eEach channel features a front panel 1\/4\" input, a 1\/4\" pass thru, and an input attenuation switch with 0 dB, -20 dB, -40 dB settings and accepts a frequency response of 10 to 50,000 Hz. Each channel features a back panel balanced XLR-3M output for connecting to a mixing console or preamplifier for recording as well as a ground lift switch.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362630905,"sku":"PDB4","price":109.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1406117178_1069101.jpg?v=1750191624"},{"product_id":"art-usbdi","title":"USBDI","description":"\u003cp\u003eThe ART USBDI simply converts the USB stereo digital audio signal from your computer into analog audio signal, enabling you to play higher-quality sound over your headphones and speakers. It can be connected to a variety of line-level input devices including mixers, receivers, and powered speakers. The two transformer-isolated balanced XLR line-level outputs are key to removing buzz, hum, and other system noise that could occur between the computer and your analog audio system. A Ground Lift switch adds another level of hum protection. The separate 3.5mm headphone output allows users to monitor the sound using a wide variety of headphone models.\u003c\/p\u003e\u003cp\u003eA large knob on the USBDI's front panel allows quick and precise control over the output level. The Main Outputs Fixed\/Variable switch allows you to either keep the main XLR outputs at a fixed level while controlling the level of the headphones (Fixed Mode) or adjust the level of the main XLR outputs (Variable Mode). The unit is powered via USB bus power from your computer, eliminating the need for an external power source.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362696441,"sku":"USBDI","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1642758378_1657318.jpg?v=1750191628"},{"product_id":"art-xdirect","title":"Xdirect","description":"\u003cp\u003eThe Xdirect from ART is a high quality interface that allows for connecting instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1\/4\" and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source.\u003c\/p\u003e\u003cp\u003eThe unit has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Xdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/p\u003e\u003cp\u003eThe Xdirect's active circuitry is powered by an internal 9V battery, when external power is not available. In this mode it draws 3.5mA which should provide more than 250 hours of operation off of a new battery. If phantom power is available, then the unit will automatically draw its power from the external source.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362761977,"sku":"XDIRECT","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1539776178_358944.jpg?v=1750191631"},{"product_id":"art-zdirect","title":"Zdirect","description":"\u003cp\u003eThe Zdirect from ART is a high quality passive interface that allows for connecting instrument, line, or speaker level signals to a mixer or other balanced input through a high performance audio isolation transformer. The high impedance single-ended 1\/4\" input is converted by the transformer into an isolated balanced low impedance signal source.\u003c\/p\u003e\u003cp\u003eThe unit has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565362827513,"sku":"ZDIRECT","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1462901735_381595.jpg?v=1750191634"},{"product_id":"art-coolswitch","title":"CoolSwitch","description":"\u003cp\u003eThe ART CoolSwitch is a convenient utility that allows A\/B switching of a single mono source signal (guitar, bass or keyboard) between two amplifiers or channels. The unit also allows switching between two source signals, into a signal amplifier or amplifier channel. The unit provides dual 1\/4\" Phone inputs and outputs, A\/B switch LED indicators and dual, \"stomp box\" style A\/B or Y configuration switches. The CoolSwitch is powered via single 9V alkaline battery (included) making it suitable for remote recording and P.A. application.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565363319033,"sku":"COOLSWITCH","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/md_coolswitch-top.webp?v=1750194114"},{"product_id":"art-coolswitchpro","title":"CoolSwitchPro","description":"\u003cp\u003eThe handy CoolSwitchPro Isolated A\/B-Y Switch from ART is a foot-operated box that lets you switch an instrument signal (guitar, bass, or keyboard) to either of two connected amplifiers or amp channels, A or B. The \"Y\" function sends the input signal to both the A and B outputs in parallel.\u003c\/p\u003e\u003cp\u003eThe switch-selectable features on the B channel add versatility to the basic switching functions. A high-quality audio transformer can be switched in to provide isolation between the input and output signals, which helps reduce the danger of shock when the amplifiers are at a different potential. Also, this isolation, along with a ground lift function, helps to eliminate the hum caused by ground loops. The phase reverse function lets you make sure both amps work in phase.\u003c\/p\u003e\u003cp\u003eThe COOLSwitchPro is completely passive with true bypass and is housed in a rugged, stable case with industrial-grade footswitches spaced for easy operation. It will provide many years of reliable service, whether on stage or in the studio.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565363351801,"sku":"COOLSWITCHPRO","price":79.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1400844029_1053936.jpg?v=1750191665"},{"product_id":"art-lswitch","title":"LSswitch","description":"\u003cp\u003eLatching footswitch (NC), for amps \u0026amp; FX\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565363417337,"sku":"LSWITCH","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1538664337_288116.jpg?v=1750191668"},{"product_id":"art-loopswitch","title":"LoopSwitch","description":"\u003cp\u003eTrue bypass loop switcher or AB switch\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565363515641,"sku":"LOOPSWITCH","price":59.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/md_LoopSwitch-front.webp?v=1750194094"},{"product_id":"art-phantom2pro","title":"Phantom II Pro","description":"\u003cp\u003eThe PHANTOM II Pro from Art is a 2-channel portable phantom power supply with XLR connectors that operates off of two 9 Volt batteries. Condenser microphones with voltage requirements from 9-48 Volts are supported.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565364957433,"sku":"PHANTOM2PRO","price":89.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1272897030_288123.jpg?v=1750191733"},{"product_id":"art-dti","title":"DTI","description":"\u003cp\u003eThe DTI (Dual Transformer\/Isolater) from ART is a high quality, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise.\u003c\/p\u003e\u003cp\u003eThe unit's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ω to 100k Ω.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565366104313,"sku":"DTI","price":75.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1519816652_381596.jpg?v=1750191789"},{"product_id":"art-arts8","title":"S8","description":"\u003cp\u003eThe ART S8 8-Channel Microphone Signal Splitter is ideal for sending a secondary microphone signal to a monitor mixer, recording device, etc. The S8 features eight XLR inputs and 16 outputs. Eight direct outputs pass phantom power to the microphone and are intended to feed the main preamplifiers, mixer inputs or other input devices.\u003c\/p\u003e\u003cp\u003eThe eight isolated outputs are provided to feed a secondary input device, such as a recording device or monitor mixer input. A -29dB input Pad switch is provided on each channel. Ground-lift switches eliminate ground loop noise caused by connected devices.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565366169849,"sku":"ARTS8","price":299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1484062672_547623.jpg?v=1750191792"},{"product_id":"art-arts8-3way","title":"S8-3WAY","description":"\u003cp\u003eThe ART S8-3WAY 8-Channel 3-Way Microphone Splitter can be used for live sound, recording and broadcast applications with its 3 XLR balanced outputs per each of 8 XLR inputs.\u003c\/p\u003e\u003cp\u003eA typical installation might use the S8-3WAY for directing 8 signals to a FOH mixer, monitor mix and transformer isolated XLR outputs to the recording desk or broadcast feed.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565366202617,"sku":"ARTS8-3WAY","price":329.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1484062672_616206.jpg?v=1750191795"},{"product_id":"art-prosplit","title":"ProSplit","description":"\u003cp\u003eThe ART ProSplit Microphone Signal Splitter is ideal for sending a secondary microphone signal to a monitor mixer or recording device, etc. The ProSplit features two XLR outputs. The direct output passes phantom power to the microphone and is intended to feed the main preamplifier, mixer or other input device.\u003c\/p\u003e\u003cp\u003eThe isolated output is provided to feed a secondary input device, such as a recording device or monitor mixer. A -29dB input pad switch provides added headroom and minimizes distortion. A ground-lift switch elliminates ground loop noise caused by connected devices.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565366333689,"sku":"PROSPLIT","price":69.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1233174454_547630.jpg?v=1750191805"},{"product_id":"art-splitcompro","title":"SplitCom Pro","description":"\u003cp\u003eThe SPLITCom Pro from ART is a compact and rugged unit that can be used to split or combine low-impedance microphone signals. Part of the \"ARTcessories\" line, the SPLITCom Pro is ideal for use on stage, in a studio, or in your home.\u003c\/p\u003e\u003cp\u003eWhen used as a splitter, the SPLITCom Pro provides one direct-coupled output and one isolated output from a single mic source. This allows you to send the direct output to a mixer, while sending the isolated output to a monitor, for example. Phantom power will pass through the main mic output, but is blocked from passing to the isolated output.\u003c\/p\u003e\u003cp\u003eWhen used as a combiner, the unit provides a single output from two mic sources. A phase switch allows you to invert the phase of the isolated mic input. Combining mics allows you to dual-mic a drum kit, choir, or instrument amp. Phantom power will pass through each output to its respective input (main to main, or isolated to isolated), but is blocked from going between the main and isolated signal paths.\u003c\/p\u003e","brand":"ART","offers":[{"title":"Default Title","offer_id":46565366431993,"sku":"SPLITCOMPRO","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1233174454_547632.jpg?v=1750191808"},{"product_id":"samson-sa-spatchplus","title":"S-Patch Plus","description":"\u003cp\u003eThe Samson S-patch Plus is a rugged 48-point audio patch bay designed for use in project and professional recording studios, musician rigs, video editing facilities, etc. The patch bay enables easy audio signal routing, eliminating the clutter of excess cable and complex routing configurations. The Samson S-patch Plus is capable of Normal, Half-normal and Thru mode operation, features 1\/4\" phone connections and easily mounts into a single-space, 19-inch rack.\u003c\/p\u003e","brand":"Samson","offers":[{"title":"Default Title","offer_id":46568321483001,"sku":"SA-SPATCHPLUS","price":259.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1575474764_294021.jpg?v=1750280594"},{"product_id":"samson-samcd2pro","title":"MCD2 Pro","description":"\u003cp\u003e\u003cstrong\u003eTo The Max.\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eSamson's MCD2 Pro Stereo Passive PC Direct Box is the ideal solution for connecting unbalanced line level signals from laptops, CD\/MP3 players, and DJ mixers to professional, balanced equipment. Durable, roadworthy construction and two Mu-metal shielded transformers provide high-quality signal connection solutions for a variety of live sound and recording applications.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCustom STLX Transformers\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe MCD2 Pro features two of Samson's STLX Mu-Metal shielded transformers that deliver an extended, flat frequency response with ultra-low distortion and superior protection against hum and RF interference. The MCD2 Pro's balanced outputs provide clean signals that are less susceptible to noise than unbalanced lines, allowing for longer cable runs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInput Options\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eThe MCD2 Pro features dual 1\/4\", RCA and a stereo 1\/8\" input to accommodate any line level instrument or consumer audio connection. Its selectable Stereo\/Mono sum switch allows users to accommodate typical mono \"house\" PA systems. Additionally, a 2-position 0dB\/-12dB attenuation switch provides users with ample headroom to handle hotter inputs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRoadworthy Construction\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eHoused in a 14-gauge steel chassis, the MCD2 Pro is built to withstand the abuse of the most demanding live tours. Its rigid outer shell protects all the MCD2 Pro's internal connections, switches and solder joints from failure, ensuring quiet, reliable performance.\u003c\/span\u003e\u003c\/p\u003e","brand":"Samson","offers":[{"title":"Default Title","offer_id":46568321646841,"sku":"SAMCD2PRO","price":199.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/63117650d_400x_da532aaf-6b4d-445e-90ce-9d38fc75d1ef.png?v=1750282685"},{"product_id":"samson-samd1","title":"MD1","description":"\u003cp\u003eThe Samson Tech S-MAX MD1 Single Channel Passive Direct Box features an all-metal, impact resistant construction to provide high-quality signal connection solutions for live and studio applications.\u003c\/p\u003e\u003cp\u003eThe box features the company's STL transformer, which allows you to send your instrument and amp signals to the main mixing board with confidence. The unit provides a parallel Thru and Balanced Output to simultaneously route your signal to an onstage amplifier and mixer. The STL transformer gives the unit a flat frequency response that will maintain the natural sound of your instrument and provide isolation from electrical and RF interference.\u003c\/p\u003e","brand":"Samson","offers":[{"title":"Default Title","offer_id":46568321745145,"sku":"SAMD1","price":84.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1433511934_1156094.jpg?v=1750280603"},{"product_id":"samson-samd2pro","title":"MD2 Pro","description":"\u003cp\u003eThe \u003cspan\u003eSamson Tech S-MAX MD2 Pro 2-Channel Passive Direct Box\u003c\/span\u003e features an all-metal, impact resistant construction to provide high-quality signal connection solutions for live and studio applications.\u003c\/p\u003e\n\u003cp\u003eThe box utilizes the company's Mu-Metal shielded STLX transformer, which is specifically designed to handle high signal levels and prevent interference. The STLX efficiently transfers the natural sound of your instruments. The unit also includes attenuation settings to toggle between line and speaker level signals.\u003c\/p\u003e","brand":"Samson","offers":[{"title":"Default Title","offer_id":46568321876217,"sku":"SAMD2PRO","price":184.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/samson-md2pro_400x_be1a955c-2e7e-4c45-92d1-bef3fd22af07.webp?v=1750282101"},{"product_id":"hosa-dib-443","title":"Hosa DIB-443 Sidekick Passive DI Box (1\/4 in TS to XLR3M)","description":"\u003cp\u003eThe Hosa DIB-443 Sidekick is a single-channel passive DI. An isolation transformer converts a high-impedance 1\/4\" instrument signal to a balanced XLR line feed without batteries or phantom power. An INST\/LINE switch sets the level for a clean feed or for a hotter amp-like hit.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e DIB-443\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine:\u003c\/strong\u003e Pro-Conex Sidekick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit:\u003c\/strong\u003e Passive, transformer-isolated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 1 (mono)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1\/4\" TS unbalanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e XLR3M balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitch:\u003c\/strong\u003e INST \/ LINE\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hosa","offers":[{"title":"Default Title","offer_id":46600185348345,"sku":"DIB-443","price":50.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/hosa-logo-black_6f0be537-02a6-47ce-9124-2c94b89368ee.png?v=1751240598"},{"product_id":"warm-audio-wa-di-a","title":"Warm Audio WA-DI-A Active Direct Box","description":"\u003cp\u003eThe Warm Audio WA-DI-A is an active direct box built around a custom-wound CineMag USA transformer and 100% Class-A discrete analog circuitry. It converts high-impedance instrument signals from guitars, basses, and keyboards into balanced, low-impedance mic-level output without degrading the source tone. The unit operates in active mode via 48V phantom power or dual 9V batteries (1,600+ hours of battery life), and can also be switched to passive mode for added versatility.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active (switchable to passive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer:\u003c\/strong\u003e Custom CineMag USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz to 90 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.01% from 20 Hz to 50 Hz, less than 0.003% from 50 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 1 M Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 600 Ohms, balanced, mic level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e Variable, -3 dB to -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x 1\/4\" TS (instrument)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x XLR (balanced), 1 x 1\/4\" TS (thru)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e Phase reverse, ground lift, amp\/instrument, active\/passive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 48V phantom (auto-sensing) or 2 x 9V batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Extruded aluminum chassis, gold-plated PCB traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 190 x 190 x 70 mm (7.5 x 7.5 x 2.75\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (1.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarm Audio WA-DI-A Active Direct Box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":47069609328889,"sku":"WA-DI-A","price":319.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-DI-A_c4402f8b-288b-4e8f-8fc8-de82375f6d56.jpg?v=1765322118"},{"product_id":"warm-audio-wa-di-p","title":"Warm Audio WA-DI-P Passive Direct Box","description":"\u003cp\u003eThe Warm Audio WA-DI-P is a passive direct box built around a custom-wound CineMag USA transformer. It converts high-impedance instrument signals from guitars, basses, and keyboards into balanced, low-impedance mic-level output without requiring external power. The transformer handles all signal conversion passively, preserving the natural harmonic character of your instrument through long cable runs and into any mixer or interface.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Passive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer:\u003c\/strong\u003e Custom CineMag USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz to 70 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.01% from 20 Hz to 100 Hz, less than 0.004% from 100 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 1 M Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 600 Ohms, balanced, mic level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e Variable, -3 dB to -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x 1\/4\" TS (instrument)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x XLR (balanced), 1 x 1\/4\" TS (thru)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e Phase reverse, ground lift, amp\/instrument\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e None required (passive operation)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Extruded aluminum chassis, gold-plated PCB traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 190 x 190 x 70 mm (7.5 x 7.5 x 2.75\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (1.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarm Audio WA-DI-P Passive Direct Box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":47069609361657,"sku":"WA-DI-P","price":269.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-DI-P_a81f0c96-3886-48bc-8ed7-55fa30305949.jpg?v=1765322120"},{"product_id":"heritage-audio-ut-vintagedirectbox","title":"UT-VINTAGEDIRECTBOX","description":"\u003cp\u003eThe purest tone possible.\u003cbr\u003e\nUnited’s Vintage Direct bridges the gap between old-school tape operators and modern recordists. When the most demanding recording engineer needs the very best, the Vintage Direct delivers massive sound from its massive transformer. Its circuit design is based around eliminating any of the potential tone-robbing components in the signal path that you’re likely to find in a lesser DI Box.\u003c\/p\u003e  \n\n\u003cp\u003eWhen you need the very best, the Vintage Direct delivers.\u003c\/p\u003e\n\n\u003cp\u003eFeaturing Custom Large-Core United Transformers.\u003cbr\u003e\nWe did the research.\u003c\/p\u003e\n\n\u003cp\u003eWhile typical DI circuits are simple, the very best depend on great transformers — and this is where the Vintage Direct excels.. The design of Vintage Direct was inspired by the earliest hand-wired DI boxes, such as the Wolfbox and Bruce Swedien’s Bass Box, both of which used massive early transformers made by Triad, UTC, and others.\u003c\/p\u003e \n\n\u003cp\u003eOur research began with the UTC A12 transformer, first manufactured in the early ‘60s. Several original transformers were measured to accurately reproduce their winding ratios, bobbin and magnet wire type, and lamination style.\u003c\/p\u003e \n\n\u003cp\u003eWe spent years exploring many versions of this design, experimenting with different winding ratios and alloys; we ultimately settled on a high-nickel lamination and a winding ratio very close to the classics that inspired us. The result: United’s US-made 5078 — one of the largest transformers you’ll find in a DI. It delivers a pristine low-noise signal, wide frequency response, extraordinary headroom, and outstanding noise rejection.\u003c\/p\u003e \n\n\u003cp\u003eFlexible options with audiophile-grade components.\u003cbr\u003e\nWe decided that nothing would come between the transformer and source that could rob tone or add noise. Most passive DI boxes use smaller, unshielded transformers reliant on resistor pads, volume pots, and RC network filters before the signal hits the transformer. Vintage Direct has none of it.\u003c\/p\u003e","brand":"United","offers":[{"title":"Default Title","offer_id":47099468841209,"sku":"UT-VINTAGEDIRECTBOX","price":599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/UT-VINTAGEDIRECTBOX_59d9f7e9-b3db-49f9-aa23-e4aa44cd93fb.jpg?v=1765321667"},{"product_id":"heritage-audio-ut-replaybox","title":"UT-REPLAYBOX","description":"\u003cp\u003eUnited’s Replay Box offers the very best performance and options for re-amplification. Whether you’re producing the most tone-savvy musician or experimenting with sound design, the Replay Box performs on a level all of its own — with an ultra-quiet design and flexible tone voicing.\u003c\/p\u003e\n\n\u003cp\u003eWIth two different custom transformers for two unique sonic fingerprints and all of the gain you need, the Replay Box raises the bar for all recordists.\u003c\/p\u003e\n\n\u003cp\u003eTwo transformers for two different voicings. \u003cbr\u003e\nReplay Box features two independent reamplification circuits: Transparent and Harmonic.\u003c\/p\u003e \n\n\u003cp\u003eThe Transparent circuit features our custom-wound, US-made, 5043 step up transformer, which provides extraordinary signal isolation and noise rejection for mastering-grade quality. It accepts your balanced or unbalanced line level input signal to deliver an absolutely clean, isolated, unbalanced output capable of driving any amp, pedal, or processor. Because the transformer is wound to have passive gain, it has about 3 dB of additional gain on tap above its already +4 dB rated input from your DAW or recorder. No active circuitry or other components are involved — you get the cleanest gain available on any re-amplification device.\u003c\/p\u003e \n\n\u003cp\u003eThe Harmonic circuit is for those who desire a bit more coloration or fattening in the re-amp stage. Harmonic mode engages an alternate transformer specifically designed to add character. This transformer is wound to offer a steeper gain ratio alongside a very gentle rolling-off of the uppermost high frequencies. It adds both harmonic and phase distortion in the sub-bass region, fattening the low mids and delivering a more aggressive and warmer tone.\u003c\/p\u003e \n\n\u003cp\u003eAll the pure transformer gain you could ever want for re-amping.\u003cbr\u003e\nThe Replay Box was designed from the ground up to solve the two most common problems found in re-amping: noise and low gain.\u003c\/p\u003e","brand":"United","offers":[{"title":"Default Title","offer_id":47099468939513,"sku":"UT-REPLAYBOX","price":469.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/UT-REPLAYBOX_d5ae41a6-7c3d-47d9-b580-12f600ee72df.jpg?v=1765321667"},{"product_id":"heritage-audio-73-di-one","title":"Heritage Audio 73 DI ONE Active Direct Box","description":"\u003cp\u003eThe Heritage Audio 73 DI ONE is a single-channel active DI with a Class A JFET input and a custom 73-style output transformer. Phantom-powered from +48V, it is built for studio tracking and live use without a separate power supply.\u003c\/p\u003e\n\u003ch3\u003e73-Style Direct Path\u003c\/h3\u003e\n\u003cp\u003eThe discrete JFET stage feeds a low-impedance Heritage Audio 73-DI transformer, adding the low-mid weight and harmonic density associated with 73 Class A output stages. Use it on passive bass and guitar, or on keys, drum machines, and electric pianos that need headroom. A 15 dB pad and ground lift are on the panel.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e Gold-plated 1\/4\" TS with thru\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Gold-plated XLR, transformer balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e Approx. 2.3 MΩ (200 kΩ with pad)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +48V phantom, LED indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 14-gauge steel, recessed connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heritage Audio","offers":[{"title":"Default Title","offer_id":47099781906681,"sku":"73-DI-ONE","price":334.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/73-DI-ONE_6ab86f9a-6ff5-4ddb-aa3e-3c5fd8b7f704.jpg?v=1765322535"},{"product_id":"heritage-audio-73-di-2","title":"Heritage Audio 73 DI 2 Active Dual-Channel Direct Box","description":"\u003cp\u003eThe Heritage Audio 73 DI 2 is a dual-channel active DI that puts a Class A JFET input and custom 73-style output transformers in front of your guitar, bass, keys, or drum machine. It runs from standard +48V phantom power, so it needs no wall wart on stage or in the rack.\u003c\/p\u003e\n\u003ch3\u003e73-Style Direct Path\u003c\/h3\u003e\n\u003cp\u003eEach channel uses the same discrete JFET front end found on Heritage Audio's 73 preamps, feeding a low-impedance custom 73-DI output transformer. High input headroom means it works on passive basses as well as hot synths, samplers, and electric pianos. A 15 dB pad and ground lift keep levels and ground loops under control.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e Gold-plated 1\/4\" TS with thru\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e Gold-plated XLR, transformer balanced\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e Approx. 2.3 MΩ (200 kΩ with pad)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e +48V phantom, LED indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e 14-gauge steel, recessed connectors\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heritage Audio","offers":[{"title":"Default Title","offer_id":47099782103289,"sku":"73-DI-2","price":499.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/73-DI-2_f05fdacc-67f7-480f-bc28-5037fb329342.jpg?v=1765322535"},{"product_id":"heritage-audio-p-di-one","title":"Heritage Audio P DI ONE Passive Direct Box","description":"\u003cp\u003eThe Heritage Audio P DI ONE is a single-channel passive DI with a custom nickel-core HA-DI transformer in a MU-metal shield. No power is required. It is voiced for active instruments and line-level electronics that need a quiet, balanced mic-level output.\u003c\/p\u003e\n\u003ch3\u003ePassive Isolation\u003c\/h3\u003e\n\u003cp\u003eThe transformer matches impedance, balances the feed, and breaks ground loops. A 15 dB pad, ground lift, gold-plated 1\/4\" input\/thru, and gold-plated XLR sit in a 14-gauge steel enclosure with a full-ground-plane board.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit:\u003c\/strong\u003e Passive transformer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz-18 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance with pad:\u003c\/strong\u003e Approx. 10 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heritage Audio","offers":[{"title":"Default Title","offer_id":47099782299897,"sku":"P-DI-ONE","price":184.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/P-DI-ONE_a5fb4d41-b7da-4a6d-9681-c8ce94328ed6.jpg?v=1765322536"},{"product_id":"heritage-audio-p-di-2","title":"Heritage Audio P DI 2 Passive Dual-Channel Direct Box","description":"\u003cp\u003eThe Heritage Audio P DI 2 is a dual-channel passive DI with custom nickel-core HA-DI transformers in MU-metal cans. It needs no power. Use it on active basses, keys, synths, drum machines, and other hot sources that want a clean, balanced mic-level feed without extra color.\u003c\/p\u003e\n\u003ch3\u003ePassive Isolation\u003c\/h3\u003e\n\u003cp\u003eThe transformers convert high impedance to low, balance the signal, and block DC and RFI, which is what kills ground-loop hum on stage. Each channel has a 15 dB pad, ground lift, gold-plated 1\/4\" input\/thru, and a gold-plated XLR out in a 14-gauge steel box.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuit:\u003c\/strong\u003e Passive transformer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 20 Hz-18 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance with pad:\u003c\/strong\u003e Approx. 10 kΩ\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Heritage Audio","offers":[{"title":"Default Title","offer_id":47099782562041,"sku":"P-DI-2","price":299.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/P-DI-2_7579307c-58e4-4a93-a503-ee827223454c.jpg?v=1765322537"},{"product_id":"warm-audio-wa-di-a-open-box","title":"Warm Audio WA-DI-A Active Direct Box (Open Box, Brand New)","description":"\u003cp\u003eThe Warm Audio WA-DI-A is an active direct box built around a custom-wound CineMag USA transformer and 100% Class-A discrete analog circuitry. It converts high-impedance instrument signals from guitars, basses, and keyboards into balanced, low-impedance mic-level output without degrading the source tone. The unit operates in active mode via 48V phantom power or dual 9V batteries (1,600+ hours of battery life), and can also be switched to passive mode for added versatility.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active (switchable to passive)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransformer:\u003c\/strong\u003e Custom CineMag USA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 10 Hz to 90 kHz (+\/- 0.5 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD:\u003c\/strong\u003e 0.01% from 20 Hz to 50 Hz, less than 0.003% from 50 Hz to 20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput impedance:\u003c\/strong\u003e 1 M Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput impedance:\u003c\/strong\u003e 600 Ohms, balanced, mic level\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e Variable, -3 dB to -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput:\u003c\/strong\u003e 1 x 1\/4\" TS (instrument)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 x XLR (balanced), 1 x 1\/4\" TS (thru)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitches:\u003c\/strong\u003e Phase reverse, ground lift, amp\/instrument, active\/passive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 48V phantom (auto-sensing) or 2 x 9V batteries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Extruded aluminum chassis, gold-plated PCB traces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 190 x 190 x 70 mm (7.5 x 7.5 x 2.75\")\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.5 kg (1.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWarm Audio WA-DI-A Active Direct Box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":47483009794297,"sku":"WA-DI-A-open-box","price":287.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-DI-A_34d9208b-e14b-42f0-8045-e68a432d72bd.jpg?v=1772836281"},{"product_id":"sennheiser-mza-900-p","title":"Sennheiser MZA 900 P Phantom Power Adapter","description":"\u003cp\u003eThe Sennheiser MZA 900 P: P48 phantom power adapter for pre-polarized condensers terminated for evolution wireless (3.5mm mini plug). Dual color smart LEDs, pre-attenuation switch (0\/-12 dB) and switchable roll-off filter\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 51 g (1.8 oz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIn the Box\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMZA 900 P Phantom power adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":47499545739513,"sku":"500226","price":239.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/bfc681765d43a9fd799c82681c85aee6683d7c2a.jpg?v=1773252919"},{"product_id":"se-electronics-se-dm3black","title":"SE Electronics DM3BLACK Dynamite Active DI with Pad and Ground Lift in Black","description":"\u003cp\u003eThe black DM3 Dynamite is a compact active DI with an ultra-high-impedance input and generous headroom for electric and bass guitars, piezo instruments, keyboards, synths, drum machines, laptops, and even vintage microphones. Connect directly to any phantom-powered XLR input with no extra cable.\u003c\/p\u003e\u003cp\u003eSwitchable 15 or 30 dB input pads handle hot sources, and a three-position ground-lift switch helps eliminate hum and buzz across low and high frequencies. A locking 1\/4 in input, gold-plated XLR output, and all-metal housing make the DM3 ready for studio or stage. Requires 48V phantom power.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eIn-line active DI for instruments\u003c\/li\u003e\n\u003cli\u003eUltra-high-impedance locking 1\/4 in input\u003c\/li\u003e\n\u003cli\u003eXLR 3-pin output\u003c\/li\u003e\n\u003cli\u003eClass-A output buffer and amplifier\u003c\/li\u003e\n\u003cli\u003eSwitchable 15 or 30 dB input pad\u003c\/li\u003e\n\u003cli\u003eThree-position ground-lift switch\u003c\/li\u003e\n\u003cli\u003eRuns on 48V phantom power\u003c\/li\u003e\n\u003cli\u003eDurable all-metal housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active DI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCircuitry:\u003c\/strong\u003e Solid-state\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad:\u003c\/strong\u003e -15 \/ -30 dB (switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround Lift:\u003c\/strong\u003e Three-position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Reverse:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-Cut Filter:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio I\/O:\u003c\/strong\u003e 1x 1\/4 in TRS balanced instrument input; 1x XLR 3-pin balanced output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 10 Hz to 120 kHz (-0.3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Input Level:\u003c\/strong\u003e +49 dBV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 10 megohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e 1 kilohm (recommended)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD\/Noise:\u003c\/strong\u003e ≤ 0.5%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 48V phantom power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 3.76 x 0.79 in \/ 95.5 x 20.07 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 2.47 oz \/ 70 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIn the Box\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e1x DM3 Dynamite active DI (black)\u003c\/li\u003e\u003c\/ul\u003e","brand":"SE Electronics","offers":[{"title":"Default Title","offer_id":48649490759929,"sku":"SE-DM3BLACK","price":139.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/1710772374_IMG_2211298.jpg?v=1783531706"},{"product_id":"se-electronics-se-dm3","title":"SE Electronics DM3 Dynamite Active DI with Pad and Ground Lift","description":"\u003cp\u003eThe sE Electronics DM3 Dynamite is an active inline direct box that converts instrument-level signals to balanced XLR output for live sound and recording. Dynamite circuitry delivers silent operation with a locking ultra-high impedance instrument input, Class-A output buffer, and switchable -15 dB and -30 dB pads for hot sources such as power amplifiers.\u003c\/p\u003e\u003cp\u003eThe 10 megohm input preserves pickup character from low-output instruments through loud amplifier feeds. A three-stage ground lift switch addresses hum, ground loops, and RF interference, while the compact all-metal chassis saves rack and pedalboard space.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eActive inline direct box with ultra-high Z instrument input\u003c\/li\u003e\n\u003cli\u003e10 megohm input impedance preserves instrument tone\u003c\/li\u003e\n\u003cli\u003eHandles powerful signals up to 10,000W with switchable -15 dB and -30 dB pads\u003c\/li\u003e\n\u003cli\u003eThree-stage ground lift switch reduces hum, ground loops, and RF interference\u003c\/li\u003e\n\u003cli\u003eLocking 1\/4\" input jack prevents accidental disconnections\u003c\/li\u003e\n\u003cli\u003eClass-A output buffer maintains signal integrity\u003c\/li\u003e\n\u003cli\u003eCompact all-metal chassis for stage and studio use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Active\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePads:\u003c\/strong\u003e -15 dB, -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGround lift:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 x 1\/4\" locking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 x XLR\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SE Electronics","offers":[{"title":"Default Title","offer_id":48649490858233,"sku":"SE-DM3","price":139.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/2022-11-1709_25_47-Window.png?v=1783531714"},{"product_id":"warm-audio-wa-di-a2","title":"Warm Audio WA-DI-A2 2-Channel Active Stereo Direct Box","description":"\u003cp\u003eWarm Audio Stereo DIs include active and passive two-channel direct boxes designed for stereo instruments, including keyboards, synthesizers, guitar processors, and stereo pedalboards. Built with premium CineMag USA transformers, both models preserve the tonal character of your instrument while delivering clean balanced signals to mixers, audio interfaces, and PA systems. A negative (3 - 30dB) pad helps dial in signal volume, and a ground\/lift switch helps eliminate ground-loop noise. The Active Stereo DI provides additional headroom and selectable active circuitry per-channel for lower output instruments and stereo rigs. The Passive Stereo DI offers transformer-isolated signal conversion ideal for high-output sources like drum machines, playback rigs, and modelers feeding FOH consoles or recording systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePremium Stereo DI Box:\u003c\/strong\u003e The Warm Audio Stereo DI provides two channels of high-quality direct injection for stereo instruments, including keyboards, synthesizers, and stereo guitar rigs. Designed for both studio and live use, the Stereo DI converts instrument-level signals into balanced outputs while maintaining the natural tone and dynamics of your source. The Active Stereo DI adds active circuitry to better match high-impedance sources to deliver consistent output levels to mixers and interfaces while the passive model will work perfectly with lower impedance signals like those from keyboards, drum machines, and acoustic-electric guitars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e With a fully passive design, the Passive Stereo DI operates without external power while still delivering reliable performance and pristine signal conversion. The transformer-based circuit maintains the tonal integrity of the source instrument while providing balanced outputs ideal for professional audio systems. The Active Stereo DI adds selectable active circuitry, powered by 48v from the line-level connections made to interfaces or mixers. The same transformer-based signal path is available on the active DI for accurate signal conversion, and the active circuitry can even aid with longer cable runs.\u003cbr\u003e\nStudio Sound, Pro Features, Road-Ready: Built with a durable metal chassis and premium internal components, both Active and Passive Stereo DI models are designed to withstand the rigors of both studio installations and touring setups. A negative (3 - 30dB) pad helps dial in your ideal signal volume, and ground\/lift switch helps eliminate ground-loop noise. The active version adds selectable 48v phantom power powered by the line-level mixer\/interface connection. The active DI can also be switched to passive mode for added versatility. Stereo DI’s rugged construction ensures dependable operation in any professional audio environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal For Stereo Instruments:\u003c\/strong\u003e The Stereo DI is specifically designed for stereo instrument sources, with the passive model being ideal for sources such as keyboards, synth modules, and stereo pedalboards. The Active Stereo DI can handle dual high-impedance signals, or blend high and low impedance signals as the active circuitry can be turned off at the channel level. The dual-channel configuration ensures consistent tone and performance across both channels while simplifying stereo signal routing in live and studio environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCineMag Transformer Equipped:\u003c\/strong\u003e Both Active and Passive Stereo DI models feature premium CineMag USA transformers that deliver exceptional clarity, rich low-end response, and smooth high-frequency detail. These transformers provide excellent isolation and noise rejection while ensuring the natural character of your instruments are preserved.\u003cbr\u003e\n5-Year Warranty: Like all Warm Audio gear, every single Warm Audio Stereo DI comes with a 5-year warranty and is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCOMPONENTS \u0026amp; INTERNAL SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCustom-Wound CineMag USA Output Transformer\u003c\/li\u003e\n\t\u003cli\u003eTop-Quality Class-A Components With Gold-Plated Traces On Circuit Board\u003c\/li\u003e\n\t\u003cli\u003eActive Only: Power: 48v Phantom. Can Also Be Used Passively\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePERFORMANCE SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBalanced Output: 600 Ohms, Mic Level\u003c\/li\u003e\n\t\u003cli\u003eInput Impedance: 1 Meg Ohms\u003c\/li\u003e\n\t\u003cli\u003eActive THD: .01% From 20 Hz To 50 Hz. Less than .003% From 50 Hz To 20 kHz\u003c\/li\u003e\n\t\u003cli\u003ePassive THD: .01% From 20Hz To 50 Hz. Less Than .004% From 50 Hz To 20 kHz\u003c\/li\u003e\n\t\u003cli\u003eActive\/Passive Frequency Response: 10 Hz To 100kHz +\/- 0.5db\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePopular Uses\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eConnect Stereo Keys \u0026amp; Synths \u0026gt; Balanced XLR Outputs To Mixers Or Audio Interfaces\u003c\/li\u003e\n\t\u003cli\u003eStereo Guitar Modelers \u0026amp; Amp Simulators \u0026gt; FOH Mixers Or Recording Interfaces\u003c\/li\u003e\n\t\u003cli\u003eStereo Pedalboards \u0026amp; Effects Rigs \u0026gt; Clean Balanced Signal To PA Systems\u003c\/li\u003e\n\t\u003cli\u003eElectronic Drum Modules \u0026amp; Samplers \u0026gt; Noise-Free Connection To Stage Boxes Or Consoles\u003c\/li\u003e\n\t\u003cli\u003eLaptop Audio Interfaces \u0026amp; Playback Rigs \u0026gt; Balanced Feed To Live Sound Systems\u003cbr\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":48836364402937,"sku":"WA-DI-A2","price":599.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-DI-A2.jpg?v=1786997106"},{"product_id":"warm-audio-wa-di-p2","title":"Warm Audio WA-DI-P2 2-Channel Passive Stereo Direct Box","description":"\u003cp\u003eWarm Audio Stereo DIs include active and passive two-channel direct boxes designed for stereo instruments, including keyboards, synthesizers, guitar processors, and stereo pedalboards. Built with premium CineMag USA transformers, both models preserve the tonal character of your instrument while delivering clean balanced signals to mixers, audio interfaces, and PA systems. A negative (3 - 30dB) pad helps dial in signal volume, and a ground\/lift switch helps eliminate ground-loop noise. The Active Stereo DI provides additional headroom and selectable active circuitry per-channel for lower output instruments and stereo rigs. The Passive Stereo DI offers transformer-isolated signal conversion ideal for high-output sources like drum machines, playback rigs, and modelers feeding FOH consoles or recording systems.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePremium Stereo DI Box:\u003c\/strong\u003e The Warm Audio Stereo DI provides two channels of high-quality direct injection for stereo instruments, including keyboards, synthesizers, and stereo guitar rigs. Designed for both studio and live use, the Stereo DI converts instrument-level signals into balanced outputs while maintaining the natural tone and dynamics of your source. The Active Stereo DI adds active circuitry to better match high-impedance sources to deliver consistent output levels to mixers and interfaces while the passive model will work perfectly with lower impedance signals like those from keyboards, drum machines, and acoustic-electric guitars.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSignal Integrity:\u003c\/strong\u003e With a fully passive design, the Passive Stereo DI operates without external power while still delivering reliable performance and pristine signal conversion. The transformer-based circuit maintains the tonal integrity of the source instrument while providing balanced outputs ideal for professional audio systems. The Active Stereo DI adds selectable active circuitry, powered by 48v from the line-level connections made to interfaces or mixers. The same transformer-based signal path is available on the active DI for accurate signal conversion, and the active circuitry can even aid with longer cable runs.\u003cbr\u003e\nStudio Sound, Pro Features, Road-Ready: Built with a durable metal chassis and premium internal components, both Active and Passive Stereo DI models are designed to withstand the rigors of both studio installations and touring setups. A negative (3 - 30dB) pad helps dial in your ideal signal volume, and ground\/lift switch helps eliminate ground-loop noise. The active version adds selectable 48v phantom power powered by the line-level mixer\/interface connection. The active DI can also be switched to passive mode for added versatility. Stereo DI’s rugged construction ensures dependable operation in any professional audio environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal For Stereo Instruments:\u003c\/strong\u003e The Stereo DI is specifically designed for stereo instrument sources, with the passive model being ideal for sources such as keyboards, synth modules, and stereo pedalboards. The Active Stereo DI can handle dual high-impedance signals, or blend high and low impedance signals as the active circuitry can be turned off at the channel level. The dual-channel configuration ensures consistent tone and performance across both channels while simplifying stereo signal routing in live and studio environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCineMag Transformer Equipped:\u003c\/strong\u003e Both Active and Passive Stereo DI models feature premium CineMag USA transformers that deliver exceptional clarity, rich low-end response, and smooth high-frequency detail. These transformers provide excellent isolation and noise rejection while ensuring the natural character of your instruments are preserved.\u003cbr\u003e\n5-Year Warranty: Like all Warm Audio gear, every single Warm Audio Stereo DI comes with a 5-year warranty and is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCOMPONENTS \u0026amp; INTERNAL SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCustom-Wound CineMag USA Output Transformer\u003c\/li\u003e\n\t\u003cli\u003eTop-Quality Class-A Components With Gold-Plated Traces On Circuit Board\u003c\/li\u003e\n\t\u003cli\u003eActive Only: Power: 48v Phantom. Can Also Be Used Passively\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePERFORMANCE SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eBalanced Output: 600 Ohms, Mic Level\u003c\/li\u003e\n\t\u003cli\u003eInput Impedance: 1 Meg Ohms\u003c\/li\u003e\n\t\u003cli\u003eActive THD: .01% From 20 Hz To 50 Hz. Less than .003% From 50 Hz To 20 kHz\u003c\/li\u003e\n\t\u003cli\u003ePassive THD: .01% From 20Hz To 50 Hz. Less Than .004% From 50 Hz To 20 kHz\u003c\/li\u003e\n\t\u003cli\u003eActive\/Passive Frequency Response: 10 Hz To 100kHz +\/- 0.5db\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePopular Uses\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eConnect Stereo Keys \u0026amp; Synths \u0026gt; Balanced XLR Outputs To Mixers Or Audio Interfaces\u003c\/li\u003e\n\t\u003cli\u003eStereo Guitar Modelers \u0026amp; Amp Simulators \u0026gt; FOH Mixers Or Recording Interfaces\u003c\/li\u003e\n\t\u003cli\u003eStereo Pedalboards \u0026amp; Effects Rigs \u0026gt; Clean Balanced Signal To PA Systems\u003c\/li\u003e\n\t\u003cli\u003eElectronic Drum Modules \u0026amp; Samplers \u0026gt; Noise-Free Connection To Stage Boxes Or Consoles\u003c\/li\u003e\n\t\u003cli\u003eLaptop Audio Interfaces \u0026amp; Playback Rigs \u0026gt; Balanced Feed To Live Sound Systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":48836364501241,"sku":"WA-DI-P2","price":499.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-DI-P2.jpg?v=1786997112"},{"product_id":"warm-audio-wa-ra","title":"Warm Audio WA-RA All-Analog Studio Re-Amper with Independent Preamp","description":"\u003cp\u003e\u003cstrong\u003eThe Warm Audio Reamper\u003c\/strong\u003e is a creative routing hub that lets guitar amps, pedals, synths, and studio gear work together, with silent tube amp recording built in. Re-amp dry DAW signals with any of your favorite tube amplifiers. Add any studio gear to your guitar chain, or add any guitar effects to your typical studio chain easily. Use the built-in power soak to record tube amps up to 50W (8Ω impedance) without engaging the speaker for silent tracking. Not limited to just guitar, add any synth modules to line-level sources as well and craft the ultimate experimental tones with any type of effects processors.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eAdd Life To Dry Guitar Tracks With Real Tube Amps:\u003c\/strong\u003e Take dry guitar tracks straight from your DAW and feed them directly into your favorite tube amps via the Reamper. Not having to play the part during the re-amping process means endless tweaking and sound-crafting possibilities.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIndependently Track Dry \u0026amp; Tube-Amp Signals:\u003c\/strong\u003e Use the multitude of connections on Reamper to record with your favorite tube amps for confidence, feel, and response while also simultaneously capturing a “bail-out” dry signal for the session that can be re-amped or run through amp sims later in the mixing process. Reamper also works for integrating keyboard\/synth gear and works for active and passive connections.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eTrack Loud Amp Tones Quietly At Home Or In The Studio (50W\/8Ω):\u003c\/strong\u003e Get the most out of your 50W tube amps regardless of time of day, or how many neighbors will complain. Reamper has a built-in 50W\/8Ω power soak, allowing you to record the pre and power amp without connecting a speaker. Easily monitor the signal through headphones connected to your audio interface.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSeamlessly Add Guitar Pedals To Line-Level Studio Rigs:\u003c\/strong\u003e Integrate unbalanced guitar effects into balanced, line-level signal chains. All of the cool delays, reverbs, tremolos, or ring modulators can be easily added to vocal chains, drum busses, and much more.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eUse Line-Level Rack Mount Effects Units On Guitar Chains:\u003c\/strong\u003e Any line-level balanced studio rack gear can be added directly into your guitar recording chain during recording or re-amping. It can be a compressor, EQ, or digital reverbs and delays; Reamper makes translating guitar chains to studio chains simple.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuilt To Professional Studio Standards:\u003c\/strong\u003e Reamper includes USA-Made CineMag transformers on the input and output stages and a custom heat sink to manage the power soak for silent recording. Like all Warm Audio gear, Reamper is loaded with premium electronic components throughout the signal path.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e5-Year Warranty:\u003c\/strong\u003e Like all Warm Audio gear, every single WA-RA comes with a 5-year warranty and is meticulously hand-tested and inspected by trained technicians with a passion for making music in Austin, TX USA.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003ePRODUCT DESCRIPTION \u0026amp; EXTERNAL SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eDual-Channel Active Instrument Preamp \u0026amp; Re-Amp Device\u003c\/li\u003e\n\t\u003cli\u003eIndependent Instrument Preamp And Re-Amp Signal Paths\u003c\/li\u003e\n\t\u003cli\u003eCineMag Transformer Isolation On Each Signal Path\u003c\/li\u003e\n\t\u003cli\u003eConnect Instrument, Line-Level, \u0026amp; Speaker-Level Signals\u003c\/li\u003e\n\t\u003cli\u003eCompatible With Passive And Active Instruments, Keyboards, And Pedals\u003c\/li\u003e\n\t\u003cli\u003eSpeaker Input With Direct Through Or Built-In Power Soak For Silent Operation\u003c\/li\u003e\n\t\u003cli\u003eStepless Re-Amp Output Level Control For Attenuation Or Gain\u003c\/li\u003e\n\t\u003cli\u003eBalanced Line-Level I\/O On XLR And 1\/4\" Connections (No Phantom Power Required)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCOMPONENTS \u0026amp; INTERNAL SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eCustom CineMag USA Transformers On Each Signal Path (Inputs \u0026amp; Outputs)\u003c\/li\u003e\n\t\u003cli\u003eSwitchable JFET Discrete Or JFET Op-Amp Instrument Input Stage\u003c\/li\u003e\n\t\u003cli\u003eFully Active Circuitry With Ultra-Low-Noise Design\u003c\/li\u003e\n\t\u003cli\u003eHigh-Quality Components Throughout Signal Path\u003c\/li\u003e\n\t\u003cli\u003eInternal Universal AC Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePERFORMANCE SPECS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eChannels: 2\u003c\/li\u003e\n\t\u003cli\u003eMaximum Instrument Input Level: +18 dBu (6 VRMS)\u003c\/li\u003e\n\t\u003cli\u003eInstrument Input Impedance: Variable 120kΩ To 1MΩ\u003c\/li\u003e\n\t\u003cli\u003eRe-Amp Output Level: Stepless Attenuation To Gain\u003c\/li\u003e\n\t\u003cli\u003eSpeaker Power Soak: 8 Ohms, 50 Watts Max\u003c\/li\u003e\n\t\u003cli\u003eBalanced Line Output: True Line Level On XLR And 1\/4\"\u003c\/li\u003e\n\t\u003cli\u003ePhase-Invert \u0026amp; Ground\/Lift Per Channel\u003c\/li\u003e\n\t\u003cli\u003ePower: 90–240V AC, 50–60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePOPULAR USES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eRun DAW tracks back through any tube amp or effects pedals\u003c\/li\u003e\n\t\u003cli\u003eCleanly mix\/match any guitar and studio sources with or without analog vibe using the JFET \/ Op-Amp switch\u003c\/li\u003e\n\t\u003cli\u003eUse the built-in power soak to record tube amps up to 50W (8Ω impedance) without engaging the speaker for silent tracking.\u003c\/li\u003e\n\t\u003cli\u003eEasily add delays, reverbs, tremolos, or ring modulators to vocal chains, drum busses, and much more.\u003c\/li\u003e\n\t\u003cli\u003eRun your guitar signal through studio-grade preamps, compressors, EQs \u0026amp; more to get the full impact of a pro studio signal chain on guitar recordings\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Warm Audio","offers":[{"title":"Default Title","offer_id":48836364697849,"sku":"WA-RA","price":749.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/files\/WA-RA.jpg?v=1786997117"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0746\/5766\/1177\/collections\/WA-DI-P_a81f0c96-3886-48bc-8ed7-55fa30305949.jpg?v=1791589316","url":"https:\/\/blackoutaudio.com\/collections\/di-boxes.oembed","provider":"Blackout Audio","version":"1.0","type":"link"}